What are the polishing steps of jade bracelets? Who can elaborate?

Put the carved jade bracelet and a certain amount of polishing powder into a roller with a grindstone and inject a proper amount of water. It should be noted that the number of grindstones is affected by the number of jadeites. Different jadeites need different grindstones. If it is high-grade jadeite, its drum is also small, and grinding needs to be carried out independently.

Step 2 trim lines

You need to prepare a sand gum alcohol lamp to trim the lines. Sand gum is a kind of film containing fine diamonds. First, burn the flaky mortar with an alcohol lamp until it melts. When the machine stops, put the molten mortar on the bearing. When painting, you must spread it evenly on the whole horizontal axis. Then run the machine at low speed, heat the mortar on the bearing with alcohol lamp, spread the mortar evenly with iron sheet, and then continue to heat. Finally, after the mortar is turned into a dish, the edge of the jade bracelet will be repaired. In the whole process, we should constantly apply the aqueous solution of emery to the flying saucer sand glue by hand until all the lines disappear.

Step 3 Trim a smooth surface

In the step of smooth finishing, it is necessary to prepare different types of brushes, and then sweep the plane of the jade bracelet with a brush stained with polishing powder oil. If you want to polish evenly and fully, then its polishing feel should be slightly hot.

4. Plastic surgery

This step is very subtle. First of all, we should make bamboo sticks into various types of sectors, and then soak these bamboo sticks in the grinding paste for cutting stones. If the jadeite bracelet is not smooth after polishing, you should use a bamboo stick cloth stained with polishing powder and wipe it repeatedly with appropriate amount of cold water until the surface is shiny. Finally, the cowhide wheel can be dipped in brightener and polished repeatedly.

5. Put it into a magnetic cleaning machine.

Put the jade bracelet in the magnetic cleaner. Jade cleaning liquid needs to be put into a magnetic cleaning machine, then washed with tap water, and finally dried by a hair dryer before shipment.