Does a new car need to be run-in?

"Many people understand that the first step after buying a new car is to face the running-in period. The quality of the running-in period of the new car is directly related to the future use of the car, but most people do not necessarily not Understand why new cars need to be run-in, how they should be run-in, etc. Today I will tell you some experiences about new car run-in.

The running-in period is mainly applicable to non-luxury models

"The running-in period. "It means to let the new car drive "unconventionally" for a period of time, so that the various rotations of the engine, chassis, and transmission parts can run in smoothly. When a new car leaves the factory, due to the processing accuracy of each part and other reasons, during the period of starting driving, the moving parts of each part of the vehicle It has not been run-in yet, so it must be used with caution, otherwise it will aggravate the damage to the parts and bring hidden dangers in the future. All major automobile manufacturers have stipulated that within a certain initial mileage, for example, the vehicle must be driven strictly according to the regulations within 3,000 kilometers. This period is called the running-in period.

Interestingly, some luxury car owners are also prepared to carefully let their cars go through the "running-in period". In fact, the "running-in period" is the most important thing. Suitable for non-luxury models. Because luxury models have generally gone through the running-in period before leaving the factory, they can be used normally when they are delivered to the owner.

Avoid sudden braking when turning during the first 500 kilometers.

To maintain the best condition of a newly purchased vehicle and extend its service life, car owners should develop correct driving habits and maintenance awareness within the first 3,000 kilometers of use.

Specifically, during the first 30-50 kilometers, It is necessary to check whether there is oil leakage in the transmission, front and rear drive axles, drive shafts, etc. At the same time, check the braking capacity, tightness and sealing effect of the braking system because the new friction brake pads have not yet been installed. To achieve a braking effect of 100%, the brakes should be advanced. Considering that the tire friction is insufficient, the soles of the feet should be slightly harder than normal when braking. This also applies to car owners who have just replaced new tires or new brake pedals. It is best to check the tightening of the exposed bolts and nuts of the entire vehicle.

In the first 500 kilometers of the new car, because the new tires have not yet reached optimal adhesion, emergency braking should be avoided when turning quickly. When it reaches about 100 kilometers per hour, the car owner should drive gently, with the speed not exceeding 100 kilometers per hour, and the rotation speed not exceeding 2500 rpm. By 2500-3500 kilometers, the water temperature of the new car has reached the operating temperature, and it can be gradually increased to the maximum speed or the maximum engine speed. Seeing that the mileage on the instrument panel has reached about 3,000 kilometers, the running-in period is finally over. At this time, the car owner can go to the designated 4S store for full vehicle running-in maintenance, including engine oil replacement, engine filter replacement, cleaning, cylinder pressure measurement, inspection and cleaning. If there is carbon accumulation in the combustion chamber, check and adjust the engine idle speed. Let the technician check the brake system, adjust the clutch pedal free travel, and tighten the suspension and steering gear. After the first routine maintenance, the coordination between all moving parts in the car is completed. Once it reaches a smooth state, the vehicle will begin to drive at its best performance.

After the running-in period, a new car with better running-in will generally be more powerful, with clear gears, and the accelerator, brake, and clutch will all become smoother. More comfortable. If the running-in is not good, you won’t feel anything while driving, but as the kilometers go up, minor problems will appear, and the engine life will also be reduced. Your car may lose its power after 100,000 or 200,000 kilometers, and the machine may also Need to be overhauled in advance. Therefore, car grinding is the foundation of driving. If you want to use your car well in the future, the first step is to grind it well. This is something new car owners must have figured out. Let’s talk about new car running-in and maintenance

1. When my Focus was running-in, the technician also suggested that I install the engine protector MC Magnet, which will make the running-in better. At the same time, try to add better quality gasoline to new cars. During the running-in period, you should always check whether the engine oil, coolant, and battery electrolyte are sufficient. If any shortage is found, replenish it in time.

2. According to the manufacturer's requirements, after reaching a certain number of kilometers (during the running-in period or after the end), you must go to the service station in time for vehicle inspection and maintenance, replace engine oil, engine filter, etc., and conduct a comprehensive inspection of the chassis system.

"