Precautions for installing toilet

The installation of the bathroom is generally done by a professional master. As the owner, it is also necessary to know, so as to know how to check the installation quality. Let me tell you the precautions for installing the toilet.

Receiving and inspecting goods

Toilets must undergo strict quality inspection before leaving the factory, but remember that no matter how big the brand is, it must be opened in front of the merchants to check whether there are obvious defects and bumps, and whether there are color differences in various parts.

Adjust the ground height

Before installing the toilet, you should thoroughly check the sewage pipe to see if there are dirt, sand, waste paper and other sundries in it. At the same time, check whether the floor where the toilet is installed is flat. If the ground is uneven, level the ground when installing the toilet.

Debugging water tank fittings

Check the tap water pipeline first, drain water for 3-5 minutes to flush the pipeline to ensure the cleanliness of the tap water pipeline; Install the angle valve and connecting hose, then connect the hose with the installed water inlet valve of water tank fittings and connect the water source. Check whether the inlet valve and seal are normal, whether the installation position of the drain valve is flexible, whether there is blockage and leakage, and whether there is leakage into the water valve filter device.

Experimental sewage discharge effect

Test the sewage discharge effect of the toilet. The way is to put the accessories in the water tank, fill it with water and try to flush the toilet. If the water vortex is fast and rushes quickly, it means that the water is unobstructed. Otherwise, check for blockage.