How to describe the construction conditions?

1. What stage has the construction entered?

According to some projects of construction management, corresponding time nodes can be added.

2. What is the construction instruction and how to write it?

Detailed provisions and descriptions of safety measures, energy distribution, matters needing attention, equipment entry, various responsibility systems, etc. , time limit for a project and construction schedule describe the upcoming construction.

3. How to describe the engineering quality?

The description of engineering quality is generally divided into appearance quality and entity quality. Appearance quality is mainly flatness and appearance size. Entity quality should be described according to different projects, such as concrete, including raw material quality, intermediate product quality, pouring quality and curing quality. It is best to refer to relevant construction specifications, design drawings and quality standards to describe them one by one.

4. How to write the job description in your resume, about site management.

Focus on the following two aspects:

1, employment experience: list your last job first, and then go back in turn. The contents listed include: the date of each employment (just write down the season and month), professional title, company name and work place, and the work done.

2. Description of achievements: List your major achievements. The specific way is to list your achievements into several small items, and attach a few examples to each item. When describing achievements, you can use the following weighty words to express your abilities, such as: development, research, creation, completion, organization, design, planning, coordination, management, training, economy, effectiveness, etc.

5. How to describe the major of construction engineering management?

Training objectives: This major trains high-skilled construction engineering talents with knowledge of project management, construction organization and management, construction project bidding, construction project measurement and valuation, construction project contract management and construction project supervision. The positions suitable for this major are cost engineer, consulting engineer, construction project manager, supervision engineer, cost engineer, builder and documenter. Professional core competence: bidding planning and quotation of construction projects. Main courses: measurement and valuation of construction engineering, project bidding and contract management, architectural drawing and structure, construction engineering management, construction supervision, construction technology, construction organization, construction data management, etc. Employment orientation: After graduation, students can engage in project management, project cost consultation, supervision and construction management in construction units, construction enterprises, real estate units, engineering construction supervision units, construction fields of quality supervision and management of construction projects and other construction departments.

6. How to describe the complete construction period?

Time limit for a project is the time for a construction project to complete all the contents stipulated in the contract and reach the completion acceptance standard, expressed in days.

The complete construction process generally includes the following parts from the beginning of the project:

1. Construction preparation stage: site cleaning, temporary shed construction, material yard layout, construction access road, etc.

2. Foundation treatment stage: After foundation excavation or piling, the survey and design unit will conduct trench inspection or static load test of pile foundation.

3. Foundation construction: After completion, the foundation acceptance record will be issued.

4. Construction of main structure: After completion, the main structure acceptance record shall be issued.

5. Water and electricity installation and decoration engineering construction

7. Sentences describing the structure

Sentence describing structure

explain

You can write sentences:

There is construction near my home, and the dust is really unbearable.

8. How to write the construction ability

Talk about what you can do, such as on-site construction management, pay-off, supervision, quality inspection and so on; Scheme preparation, various planning preparation (quality planning, safety planning, schedule planning, etc.). ), contact list (letter) preparation, etc.

The characteristics of the project include: the proposed construction unit, project nature, name, purpose, source of funds, project cost, commencement and completion date, whether the design unit, construction unit and supervision unit are complete, whether the construction drawing has passed the audit, whether the contract has been signed, relevant documents or requirements from higher authorities, project construction area and plane combination, floor number, floor height and total height. Total width, total length and plane shape. Characteristics and buried depth of foundation structure, main structure type, material and size of wall column beam, type, weight and installation position of prefabricated members, stair structure and form, location characteristics: topography, groundwater level, water quality, temperature, winter and rainy season time of the project location, considering wind direction, wind force and earthquake intensity. 5. Construction conditions: including water and electricity supply, road conditions, site leveling, surrounding environment of buildings, materials, sources of processing components, supply and processing capacity, construction machinery and transportation of the construction unit, construction technology and management level, etc. , and then combined with specific engineering characteristics to write some.

9. How to describe the project quality?

Many consumers have inquired about the calculation method of wall paint, wall brick and other areas. When decorating their home. This problem is also the calculation of decoration engineering quantity that people in the decoration industry often say. The calculation method of wall area is confusing.

Many consultants hope to get the correct answers to the following questions: First, is the area of wall paint 3.5 times that of the ground? Second, does the calculation of wall area include doors, windows and heating covers? 3. After calculation, multiply the wall area by 1. 1 times, right?

The reason why consumers are confused about the above three problems is that there are too many algorithms to calculate the amount of home decoration works at present, and every decorator who gives you a calculation can give a lot of reasons to explain the rationality of this calculation method. Moreover, disputes often occur because the calculation results of the two sides are too different, and the wall area cannot be multiplied by 3.5 with the ground.

A few days ago, a consumer reported that she found a small home improvement company to decorate, and said in advance that the total amount of the project would be settled when the project was accepted, and then the project payment would be settled. By the end of the project, the two sides took out the calculation results of quantities, only to find that the difference between the two sides in the main projects (mainly the calculation results of wall coatings) was as high as 35%.

The result is, of course, an argument between the two sides. Several negotiations failed to resolve, and the two sides were very stiff. The builder said that they used 3.5 times of the ground as the wall area, and the other party said that they had the norms of relevant departments as the basis. In fact, this 3.5 times is due to the popularity of pasting wallpaper on the wall of Beijing's home improvement in recent years. Therefore, when consumers or builders buy wallpaper, in order to calculate the convenience and the loss during construction, the seller multiplies the building area by 3.5 as the purchase quantity of wallpaper, so that there will generally be no shortage of wallpaper after buying it back. But this is only a calculation method of wallpaper purchase, not a calculation method of wall area. Therefore, it is wrong for the constructor to use this method when calculating the wall area.

Conventional calculation method of wall surface

Let's take a look at how the wall construction area of a regular home improvement company is calculated. For most formal companies, the calculation of engineering quantity is very strict, and the calculation of engineering quantity is mostly practical.

Let's give an example. The wall area quoted or declared by regular companies to customers is basically deducted from the wall area occupied by radiators, while the deduction method of door and window area is generally halved. In other words, they will calculate the size of the door and window openings according to half the area. This method of calculating engineering quantity is adopted by most regular home improvement companies at present. It is also fair to customers. The reason why it is fair is mainly because it is relatively difficult for workers to work in doors, windows, holes and other parts, but the overall price is uniform, so the area here is generally deducted because of its rationality.

There is no uniform standard for engineering quantity calculation.

At present, there is no unified calculation method for the quantity of home improvement works. This may be because the family decoration has been carried out for a short time, and many normative things are still being explored. For consumers in the decoration, the calculation method that directly affects the project price, the author suggests that it can be solved in two ways:

The first method, if the decoration company's quotation is based on the current reference price in Beijing, can consider deducting half of the door and window area to calculate the engineering quantity;

The second method, if the price quoted by the decoration company is lower than the current reference price for home decoration in Beijing, should allow the engineering quantity calculation of the decoration company to be multiplied by 1. 1, that is, the engineering quantity is 1. 1 multiplied by the actual area.

10. How to describe the construction scheme?

Guide for preparation of construction scheme

Scheme writing format requirements

1. The text format of the scheme adopts the national engineering construction standard format.

1. 1 The narrative level of the scheme is arranged in turn according to six levels: chapter, section, article, paragraph, item and event. Chapter is the main unit of the scheme, followed by the title of chapter, and the title of section is the title of the second part of the scheme; "Strip" is the basic unit of the scheme. Examples of numbering are as follows (numbering is in Times New Roman font):

Sub-items of chapters and sections

⑴ ① a。

The first line of children after paragraphs (including paragraphs) is indented by 2 characters. The content hangs vertically without indentation.

1.2 tables and illustrations in the scheme should have names, and their use should correspond to the text description. The numbers of tables and charts are based on the numbers of articles. If there are multiple drawings or tables in a clause, the serial numbers of the drawings and tables can be added after the clause number, for example, figure1.1-1,figure 1. 1-2. The font of the chart should be clear, and the illustrations should meet the drawing standards.

1.3 The numbering of formulas in the scheme is the same as that in the chart, with the bar as the unit and the formula centered. Examples of formats are as follows:

a = Q/b× 100%( 1. 1. 1- 1)

Where a is the frequency of safety accidents;

B—— the average number of employees during the reporting period;

Q refers to the number of people who have safety accidents during the reporting period.

1.4 The units in the scheme draft shall adopt legal units of measurement and be uniformly represented by symbols, such as m, m2, m3, kg, d, h (English letters are Times New Roman font), etc. Technical terms should be common terms in the industry, and notes should be added if special terms are used.

1.5 The manuscript shall be printed on A4 paper, the contents shall be in Song Dynasty No.3, the contents shall be in Song Dynasty No.4, the spacing shall be 1.0 times, and the first-class records shall be in black. The shadow of the company logo under the cover. The footer is centered on the page number "-10-" (Rome No.5), and the double-sided layout: left margin: 2.8cm, right margin: 2.0cm, and top margin: 2.0cm.. ..

The cover of 1.6 adopts a unified format. See the attached table for details.

1.7 The manuscript is clean and tidy, with clear pictures and texts, and no typos or missing words.