Is brother's good all-purpose glue poisonous? How to use brother's good all-purpose glue?

Glue can be said to be an essential material in home decoration, and it is needed in many places. Ge Liang Hao is a relatively well-known all-purpose glue brand, but many people will ask Ge Liang Hao, is the all-purpose glue poisonous? How to use the all-purpose glue? Today the editor of Tubatu will tell you about it.

1. Is Gelianghao all-purpose glue toxic?

Gelianghao brand household convenience glue is mainly made of chloroprene rubber, with added tackifying resin, accelerator, anti-aging agent, It is a one-component volatile drying adhesive that is refined with stabilizers, organic solvents, etc. through a special process. ?As long as the glue is toxic, it is harmful to the body. You will know it just by smelling the pungent smell. Brother Hao’s all-purpose glue also has a certain degree of toxicity, so you need to pay attention when using it.

2. How to use brother's good all-purpose glue?

1. Before use, the surface of the adherend must be properly treated, such as removing oil, rust, and moisture, and Remove surface dust. For degreasing and decontamination, use No. 120 gasoline, ethyl acetate or other quick-drying solvents to scrub clean and dry. Generally, use No. 0 or No. 1 sandpaper to lightly polish.

2. When gluing plywood, flooring, bamboo boards or other wooden products, the moisture content of the adherend must be below 8. If it is higher than 8, the adherend should be sun-dried or dried. Use again.

3. Generally, just apply glue once. In order to prevent the glue layer from leaving pores, you should move in one direction when applying glue, and apply glue quickly to facilitate the discharge of air and improve the bonding quality. .

4. Generally, the thinner the adhesive layer, the fewer defects and shrinkage, and the higher the bonding strength. The adhesive layer should be thin rather than thick. Thickness can easily lead to dryness, weak adhesion, blistering, etc. Therefore, under the premise of maintaining no shortage of glue, it is better to make the glue layer as thin as possible. Generally, the thickness of the glue layer is controlled at 0.08-0.15mm, that is, the total glue amount is 200-300g/㎡.

5. After applying the glue, it must be left to dry. The purpose of drying is to allow the solvent to evaporate cleanly, increase the viscosity, and promote solidification. Do not overlap immediately to avoid the glue layer becoming sticky or generating bubbles, resulting in bonding. Quality declines. The drying time is 20-25 minutes in winter and 5-15 minutes in summer. When the glue layer becomes a dry film, it will be bonded immediately. The drying time should not be too long to avoid the glue layer losing its stickiness and affecting the bonding strength.

6. Universal adhesive has strong adhesive force, so you must watch the timing when bonding. Align the position at one time, do not move back and forth, and after bonding, press, hammer or roll appropriately to drive away the air, dense the adhesive layer, and improve the viscosity quality.

7. Although the strength of the universal glue is established quickly, it takes 3-5 days to reach the maximum strength. Therefore, joints with high bearing capacity should be left for sufficient time before use.

3. Precautions when using Gelianghao all-purpose glue

1. The optimal bonding temperature of the all-purpose glue is 25℃±5℃, and the humidity is 55-75. Be sure to stir well before use.

2. The universal glue should be stored in a cool and ventilated place. If the temperature is too high, the sealing is not good, the exposure time is too long, or it is too large due to solvent volatilization and cannot be applied, please first use toluene, ethyl acetate, Dilute with wood ketone or acetone and mix well before use.

3. When the temperature of the universal glue is lower than -15℃ in winter, gelation may occur, which affects its use. However, after being heated to 15℃-30℃, it can return to its original shape and its performance remains unchanged. The heating method can be soaked in hot water at 30℃-50℃. ?

IV. How to remove Brother’s good all-purpose glue

1. Drop 502 on the original place to melt the original 502, and then quickly wash it off with water

2. Use insulating oil. Pour some insulating oil from the transformer on the table. The 502 glue will become soft quickly and can be rubbed off quickly.

3. The acetone solution is washable. 502 glue is a kind of resin glue. You only need to use an organic solvent that dissolves the resin, such as acetone. However, acetone is poisonous when inhaled. Pay attention to how you use it. You can put the adhesive part into the bottle.

4. It is said that if you put it in the refrigerator, the glue will fall off. You can try to stick 502 glue on a small area first. Just soak it in hot water. If a large area is stained with 502 glue, Apply acetone and wait about 5 to 10 minutes to remove.

5. Insulating oil secret recipe: Use insulating oil, the kind of oil in transformers, to remove 502 glue, which is very effective. Pour a little insulating oil on the solidified 502 glue. Generally, the glue will soften and be removed quickly.

6. Cleaning nail polish by chance. When I was gluing my shoes, I got 502 glue all over my hands. I picked up the nail polish remover with the intention of giving it a try, dipped it in cotton and wiped it gently, and the glue was immediately washed away. (Is it easy to buy nail polish remover? It’s also called nail polish remover? It’s available wherever cosmetics are sold.)

7. Fengyoujing. Try using Fengyoujing. The effect should be good.

8. Gasoline: Soak some gasoline in it, rub it in, and it’s done.

9. If the banana water woodware is stained with 502 glue, it can be removed by scrubbing it with banana water.

10. After being stuck with acetone 502 glue, you can wipe it with acetone and it will fall off. (If a large area is stained with 502 glue, apply acetone and wait for about 5 to 10 minutes to remove it.)

11. It can also be removed by soaking in warm water.

12. Freezing It is said that the glue will fall off if you put it in the refrigerator. You can try it first.

Is Brother Good All-Purpose Glue poisonous? How to use Brother Good All-Purpose Glue and how to clean Brother Good All-Purpose Glue. The editor has introduced it to you one by one in the article. I believe everyone knows it better now. After all, glue has a certain degree of toxicity, so wherever you use it in home decoration, you should pay attention to keeping the room ventilated and reducing the smell of glue in the room. Many decoration materials will release toxic substances during the decoration and use process. These are inevitable. After the decoration is completed, we must pay attention to removing these toxic substances, take measures such as ventilation, planting plants, and not moving in immediately. Of course, we must avoid using inferior materials in our decoration, otherwise the quality of our decoration will not be guaranteed, because some inferior materials are very toxic and the quality is not guaranteed. It is recommended that everyone apply for Tubatu decoration warranty if necessary, which can effectively prevent problems such as the use of false materials by decoration companies, and completely help owners ensure the quality of decoration.

Tubatu provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design plans" for free online, as well as decoration avoidance strategies! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiareamp;wb, you can get it for free~