Leather shoes are skillful, how to take care of the shoes that are turned over?

1, use special anti-brush to remove dirt, use soft brush to remove dust, keep it clean, and make the fluff color uniform.

2. If the color fades, you can make up the color with deerskin powder.

Extended data:

When suede shoes are dirty, they can't be wiped off after being dried. You can scrub with a wet cloth first, and then put it in a ventilated and cool place to dry. When the leather shoes look dry, dip some suede powder in the bristle brush and gently brush the upper, and the upper will be fluffy. After continuous air drying, the hair can be restored to its original state.

Here are the specific maintenance methods, you can try:

Materials: Brush, shoe support, detergent, freshener, sponge, sanitary ball.

Steps:

1, ash removal. A vacuum cleaner is available.

2. Hold it with a shoe brace first. Wooden shoe braces can change with the shape of shoes.

3. Use a special brush. Note that the surface of copper wire mainly deals with the parts with heavy stains and polished parts. Brush the glue surface in one direction first, and use the side surface for edge sewing. Rub the stain in a circle and then rub it with copper wire.

4. Wipe with a wet sponge to wet the upper. The purpose is mainly to treat water-soluble substances.

5. Shake well and spray detergent on the surface. Brush back and forth repeatedly with a rubber brush to remove the stains on both sides of the fiber, and suck up the dirty foam with a wet sponge.

6. Let it dry for ten minutes until the hair is slightly dry. When it is still wet, brush it in one direction with a rubber surface to let the hair spread out and tidy it up.

7. Let it dry for half an hour. After the upper is dry, put newspaper protection on the inside of the shoe, and spray the renewal agent evenly at the place 15cm away from the shoe. The renewal agent contains brightener, colloid (enhancing the adhesion of other substances), pigment, solvent (soluble mixed substances) and so on. The purpose of spraying renewal agent is mainly to supplement color. Black shoes tend to turn white when worn for a long time, so it is best to use natural color renewal agent.

8. After drying, use a rubber brush to make the color consistent.

9. Finally, put the desiccant for collection.

References:

Baidu encyclopedia-anti-fur