Five "reasons" to solve the sound of solid wood flooring should be eradicated.

Installing solid wood flooring is the first choice for many household flooring installations, but some owners report that there will be noise after installing solid wood flooring. The following small series will explain the causes and solutions of solid wood floor noise:

Causes and solutions of noise of solid wood floor;

1, uneven ground

The noise caused by uneven installation of solid wood floor is very common, mainly because the solid wood floor is not leveled when installed, and there is a suspension between the floor and the keel or the wooden keel is not padded. The above are the causes of noise when walking on the solid wood floor after installation. The solution to this situation is that if it is a small part, the noise part of the floor can be improved by the infiltration of essential oil. If it is a large area, it is recommended to dismantle and reassemble it.

2. There is a great difference in keel dryness.

Some manufacturers pile up wooden keels before drying, which leads to a great difference in moisture content of wooden keels. Even during the floor installation, the installer leveled the wooden keel, and there was no floor noise after the floor installation was completed. However, after the wooden keel is used for a period of time, it will lose its balance again because of the change of moisture content, which will lead to the appearance of floor noise. In order to avoid this situation, the wooden keel should be placed indoors for a week before installing the floor, which can effectively reduce this situation.

3. Loose keel

Some workers use wooden wedges and nails in the installation of solid wood floors, which will lead to insufficient nail holding force because the contact surface between wooden wedges and nails is too small, which will easily cause the wooden keel to loosen and make noise when stepping on the floor. ? This needs to be discussed with the construction master before installing the solid wood floor to choose a better keel fixing method.

4, the floor gap is insufficient

As we all know, there should be enough reserved gaps when installing the wooden floor, otherwise there will be slight arching that is difficult to be observed by the naked eye during the unfolding process of the solid wood floor, so that there is already a gap between the solid wood floor and the keel, so that the solid wood floor will vibrate up and down when walking, resulting in friction and noise. This kind of noise is also very common, so enough gaps should be reserved during installation. If this happens, don't rush to renovate and reinstall. You can generally look at the effect of wet solid wood floors. If the solid wood floor is seriously deformed after being wetted, the solid wood floor will not make a sound when squeezed in a particularly tight state.

5. The moisture-proof film has no cushion.

When the solid wood floor is installed, the moisture-proof film is not supported by the cushion, and the moisture on the ground will run to the back of the solid wood floor, which will cause slight tile deformation and distortion. On the keel, the solid wood floor is like a seesaw, and people make noise when they walk. This kind of noise is generally difficult to maintain, and the best way is to reinstall it.

It is a common problem that the solid wood floor will make noise after installation. The most important thing is that everyone should be prepared before installing the solid wood floor, so that there will not be too many problems after installation, which will affect the use of the wood floor.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~