Joke Collection Website - Mood Talk - Have any friends used Tata wooden doors? Let's talk about feelings.

Have any friends used Tata wooden doors? Let's talk about feelings.

Not bad, the tower eliminated urea-formaldehyde glue in the production process, and used Chinese fir and high-grade wood shavings veneer as the main raw materials. The surface of Tata products is planed by advanced technology and then compounded with Chinese fir by hot pressing. At the same time, imported PU paint is used on the paint surface, and the most advanced surface treatment is carried out with four-bottom and two-side solidified wax, which makes the texture luxurious.

Because the base material of Tata wooden door is secondary dried Chinese fir, and the surface is solid wood with veneer. This material has many advantages, which makes the wooden door of Tata have the technical characteristics of no deformation, no shrinkage, no warping, no fission, no moisture and no drying.

Extended data

Wood door maintenance method

1. First of all, everyone should understand the importance of temperature and humidity. It is very important to keep indoor ventilation often. Maintain indoor humidity, so that the wooden door is at normal room temperature and humidity, and prevent the wooden door from being deformed due to excessive humidity and temperature difference, and the edge sealing and decorative materials of the wooden door from falling off.

2. There is also the maintenance of hardware accessories such as door handles, door locks and hinges. Don't always open the wooden door with hands with water stains or other solutions to avoid discoloration of the door lock. Don't use too much force when opening the wooden door or turning the handle of the door lock. A proper amount of pencil lead can be added to the keyhole to play a role in lubrication.

3. There is also the maintenance of wooden doors in winter. In winter, the indoor temperature should not be too high (it is advisable to keep it around 20 degrees). Electric heaters or other heating equipment should be kept away from wooden doors as far as possible to avoid being deformed by heat. When painting the wall, the wooden door should be covered, so that the veneer material will peel off and fade, which will have an impact on the overall beauty.