What are the design skills of home improvement bar? What is the size of the bar?

Nowadays, people have different styles when decorating buildings. Some people decorate bars at home, but when designing bars, we don't know what skills they have. What's more, we don't know how big the bar is. Next, I will introduce the design skills and bar size of the home improvement bar. I hope you can refer to it when decorating the bar.

1. Design skills of home improvement bar

1. First of all, the location will certainly affect the circuit and water supply and drainage design, but especially far from the corner between pipes or drainage pipes, drainage becomes a big problem. But the drain pipe should have a certain inclination angle. Then if the bar is close to the outside, we can connect the drain pipe to the outside, but use a separate pipe to drain water; If it is necessary to connect the pipes between pipes with insufficient inclination, then when the pipes must be installed from the ceiling or wall, the construction will be more troublesome and the cost will increase accordingly.

2. Next, if you want to use electrical appliances with high power consumption in bars, such as induction cookers, you'd better design a separate circuit to avoid circuit tripping.

3. What's more, there is a bar made of corners, but the operating space needs at least 90cm, and the height of the bar has two dimensions, the single-layer bar is about 1 10cm, the double-layer bar is 80cm and 105cm, and the gap between them must be at least 25cm to put the goods on the inner layer.

2. What is the size of the bar?

1. First of all, the height of the bar usually consists of three parts: the front bar, the middle bar (also called the console) and the rear bar. The height of the bar is not fixed, which can be adjusted according to the actual situation such as the height and placement area of the bartender.

2. Next, in general, the height of the front column is1-1.2m; But the height of the middle pole is about 0.76 meters, so we try to set the height at the bartender's wrist, which is more labor-saving and beneficial to the bartender's work. The back bar is generally used for storage and display, and its height is 1.75 m or higher, but the top bar cannot exceed the height of the bartender's hand, and the bottom bar is usually 1. 1 m or the same height as the front bar.

More importantly, the height and design of the bar are flexible, so if the space is large, it can be designed as an independent bar, if the area is small, it can be designed as a leisure corner. There is no uniform standard for the height of the family column, generally depending on the height of the head of household.

Nowadays, decorators have to decorate the bar, but how big is the area? The above article is about the design skills and bar size of Jiezhuang Bar, which is not clear in Bian Xiao.