Workshop practical experience

Model essay on practical experience of the workshop (9 general articles)

When we are inspired and have a new view of our study and work life, we can record our experiences by writing them down, so that we can constantly update our ideas. So how do you write it? The following is my carefully organized model essay (9 general essays) for workshop practice, for reference only. Let's have a look.

Workshop internship experience 1, I have been studying in the electronic workshop for more than 3 months in a blink of an eye. During that time, I felt a lot and gained a lot.

To tell the truth, I don't want to be assigned to the electronics workshop to study. After all, most of the products I come into contact with are not civil aviation products, and I feel that learning is impossible. A word from the leader reassured me. Although our working methods are very different from those in the factory, their superb technology, profound professional knowledge and rigorous working attitude are all worth learning.

When I first arrived at the electronics workshop, I first came into contact with the master. Master didn't expect me just because I came out of the scheduled inspection workshop. On the contrary, he tried his best to teach. I'm not familiar with the product at first, so I dare not touch it. Slowly start to help the master brush the screws, then make the appearance, collect the products, fill in the resume of the work card, visually inspect, simply connect the power supply, weld and replace the components, and start contact inspection to help complete some maintenance tasks. Now I have grown up step by step. I am ashamed to say that although the time is not short, I still don't know much about the product principle and circuit diagram.

I understand a truth more and more here. As aviation maintenance personnel, we really can't make any mistakes, because once something goes wrong, it will affect the life of the pilot, the reputation of the company and the property of the country. Take a simple brush screw as an example. First, soak in banana oil for enough time to ensure complete soaking. As we all know, banana oil has a strong smell and certain toxicity, but when brushing your teeth, you can't wait for banana oil to kill it completely, otherwise the soaking effect is not good. Brush while it is half dry and half wet. Oh, be sure to be well protected when brushing, use tweezers and wear a mask. The master said that as a worker, you must protect your life in order to work better. Brush the screws carefully, and there can be no dirt residue. Once this job is not done well, there will be hidden dangers after re-electroplating. Not only can the original nut not be put in, but even if it is barely put in, it will have an impact on the subsequent disassembly and mechanical strength.

Needless to say, the filling of putty, painting, painting and cartoon is a meticulous work and a science. Quality is the lifeline of our aviation maintenance personnel. The premise of ensuring quality is to start from the details, go deep into ourselves and put an end to hidden dangers. There is a famous song in ancient England: "One nail is missing, one horseshoe is missing, one horseshoe is missing, one war horse is missing, a battle is lost, and a country is lost." One percent of mistakes lead to 100 percent of failures. A nail hurts a horse, and a horse loses his country. This is the detail that determines success or failure! Any mistake in the whole production process will lead to all previous efforts being wasted, resulting in the loss of manpower and material resources and affecting the normal delivery of products.

Pay attention to details and do it bit by bit. Is my biggest gain in the electronics workshop. After I return to the scheduled check-up, I will not relax because of the change of working environment. I will work harder, set high demands on myself, strictly control the customs, and form a great wall of quality like steel.

Experience of workshop practice 2 Time flies. It has been more than ten days since I came to the workshop of multifunctional factory in a blink of an eye. During this period, through my careful observation and study, the internship in the welding workshop was successfully completed as scheduled, and I also gained a lot: I not only learned the safety knowledge of the factory workshop, but also learned TPM, team production management and body welding expertise.

When I came to Shandong Multifunctional Factory, my first good impression was its factory environment and layout: the outside of the factory workshop was very green, and every morning on the way from the dormitory to the factory, I could always smell the faint scent of grass, which naturally gave people a good mood and helped to improve the enthusiasm and satisfaction of employees; In addition, there are some places for leisure and entertainment near the dormitory canteen: pavilions, badminton nets, basketball courts and so on. These infrastructures provide convenient leisure sports and entertainment facilities for employees' spare time, which fully embodies the company's humanistic care for employees! Secondly, the layout of the factory: three workshops, namely, the car body welding workshop, the painting workshop and the assembly workshop, are arranged side by side in turn, and are arranged in an orderly manner according to the working procedure. The whole factory layout is reasonable, clean and tidy, and the environment is pleasant.

In the process of workshop practice, through talking with the team leader and some experienced old employees, I obtained the relevant knowledge of workshop management production mode and a lot of body welding professional knowledge.

(1) Team is the most basic organization in an enterprise. All production tasks, service work, product quality and economic operation objectives of the enterprise should be decomposed layer by layer and finally implemented in the team. The quality of life of the team, an enterprise cell, is a sign of the health of the enterprise. Only when each team completes their own work and actively cooperates with each brother team can the enterprise finally achieve the goal of high quality, high yield and low consumption, so as to truly realize the business objectives of the enterprise! Every morning at 8: 0015, there will be a team morning meeting in this welding workshop. At that time, each team leader will put forward a better solution to the problems that occurred the day before, give a warning to the illegal operation or behavior, arrange the production tasks and precautions of the day, and propose improvement methods. I think this is really a good idea, but one thing is that the noise in the workshop is too loud, and the leader's voice is a little low, so people standing behind can't hear clearly. This is my personal experience.

(2) "Equipment TPM Visual Kanban" is posted on the workshop wall, which includes: equipment operation instruction, equipment fault prevention standard and equipment abnormal situation contact diagram. On the wall of the workshop, the improvement measures of on-site equipment management put forward and adopted by employees are also posted, and there are charts, such as "improvement on tool storage" and "improvement on front grille bracket storage". Doing so can better improve the working environment on site, make it cleaner and smoother, improve the quality and efficiency of employees' work, and contribute to the safety of employees.

(3) On the workshop assembly line, I saw ordinary hanging spot welding, CO2 shielded welding, argon arc welding, hoisting line, remote control electric locomotive and other equipment, and some workstations with a lot of welding dust were also equipped with Donaldson's advanced smoke and dust removal equipment, which maintained a good working environment for workshop employees and ensured their health; Distribution channels are forklifts and trailers; There is also a blue box for recycling excess materials next to the assembly line, which greatly saves costs and avoids unnecessary waste.

Through my internship in a multi-functional factory, I have a certain understanding of the productivity and efficiency of the workshop. Compared with some foreign factories or workshops of other joint ventures, there is indeed a gap in the automation of our workshops, the efficiency is not very high, and there are still many employees on the production line. But I think we should not blindly pursue high productivity and high efficiency, but should comprehensively consider the matching of sales volume and production capacity. Overcapacity is not good for the backlog of finished products, but will waste resources in a certain period of time. In addition, with more employees, we will provide more employment opportunities, which is more conducive to raising the income of local people, improving their lives and stimulating the local economy.

Finally, to sum up, the seven-day internship in the car body welding workshop has given me a deeper understanding of the welding process of the car and familiarized me with the whole welding process of the car body in the scenic spot. In addition, I also have a certain understanding of the management mode of the workshop. TPM and team meeting summary system can continuously improve the production process and improve it in time. I believe that the internship in the next painting workshop will definitely be fruitful!

The experience of workshop internship 3 is about to graduate, and the school gave us the task early, that is, to find an internship and get an internship certificate before graduation, otherwise it will affect graduation. In fact, I have long wanted to find an internship, so I am more anxious than our teacher, but I also know that it is not easy to find a good internship unit. According to my current conditions, I have no competitive advantage, so after looking for an internship for a period of time, I finally chose to start my internship life in a workshop in xx factory.

This factory is far from my school. I came here because of the recommendation of my classmates. I naturally trusted my classmates' eyes, so I came to the city where the factory was located with my bag on my back, and then I successfully passed the interview of the factory and became an employee of the production workshop here. The work here is well-fed, but I am also clearly aware that the work under such conditions is often hard, otherwise it is difficult to retain workers. There are not a few interns like me in the factory. Many people come from other cities like me, and their purpose is similar to mine. One is to earn some money, and the other is to complete their internship tasks. Through communication with others, I also realized the current social situation, that is, it is not easy to find a job, so just cherish it. Otherwise, I will easily get into an awkward position.

My major is related to industry, so working in a factory is actually an idea of mine. After all, I have been exposed to many musical instruments at school and participated in many practical activities, so it should be easier to get started at work. Of course, I am not satisfied with being an ordinary workshop worker in the factory all the time. I should move towards a higher goal. But since there are not many good choices now, I'd better do my present job first, which is more meaningful to me. I have to say, working in the workshop is really tiring. Not only do you have to face complicated and cold machines every day, but you should also pay attention to your own operating procedures. Otherwise, it's no use regretting something. Just entering the factory for more than a month, it made me lose more than ten kilograms, and it also made me realize the hard work, but there was nothing I could do. If I want to earn more money, I have to work overtime to catch up with the task, otherwise I will have to.

The work in the factory made me see a different society, completely different from when I was at school. This also reminds me that if I want a better life, I must always strive to win a better life.

Four hours of workshop practice passed quickly, and five months of workshop practice soon ended. In the past period of time, I have learned a lot and grown a lot. You can say it's short.

Just five months is not only a small step for my work, but also a big step for me to step into the society after graduating from college. From hot summer to cold winter, I feel different in the workshop; From the tiredness and dirtiness of the cold rolling process to the pungent smell of the pickling process, I deeply felt it.

Diligence and hard work of company employees; I know at least a little from knowing nothing about the steel pipe production process, and I deeply feel the care of the company leaders and the careful teaching of the employees in each process section. All these are the sources that inspire me to struggle and make me progress. The practice sequence of each process section is almost arranged together with the steel pipe production process, specifically cold rolling, cold drawing, solid solution, straightening, pickling and finished product inspection. Other processes (such as grinding, etc. ) They also learn from old employees to answer questions in their spare time.

After the internship, I also want to talk about my feelings and some personal thoughts with my incomplete knowledge. It is considered that the quality of waste pipe and cold rolling process are the guarantee to produce qualified finished steel pipe. The quality of raw materials of waste pipes is good, which shows that all kinds of metal materials have good properties and make the cold rolling process easy to process. Then, products with standard outer diameter, uniform wall thickness and reduced crack rate can be rolled through the standardized operation of nondestructive cold rolling mill. Of course, this does not mean that other processes are unimportant. To make a qualified finished product pipe, we should also cooperate with the correct operation of other processes. For example, the quality of solution treatment determines the corrosion resistance of steel pipe and affects its service life; Careful inspection of finished products is related to whether there are unqualified products flowing out. In addition, what I want to say most is that a good company should also have good management methods. My humble opinion: The best management method is to manage your subordinates in the way that you want others to manage you most. Finally, I still want to say that sentence: Thank you for all my concerned friends, and I will try my best.

Experience of workshop internship 5 Looking back on this internship experience, I have a lot of experience in my heart. I lament the hard work, but I am also glad that I can gain and grow in this experience. As a college student, I also actively use my holiday experience to try to work in the society. Therefore, this internship experience is no stranger to me, but it has brought many deeper and more detailed experiences.

First, entering the workshop for the first time

After a period of hard work, I finally joined the xx workshop. I still remember that at the beginning, I didn't know much about this workshop, and I didn't even dare to get in touch with strangers who were not in the scope of work. But then there were some work opportunities, and I gradually came into contact with more things and many colleagues, which not only made me realize what an excellent workshop this is, but also learned how many enthusiastic colleagues there are around me. This greatly expanded my internship and made me see the environment in society more clearly.

Second, learning workshop rules and regulations

There are many rules and requirements in the workshop, or every job should have its own rules. During my internship, I gradually realized that these regulations are of great significance and responsibility. If we don't obey the rules, it will not only affect our work, but even bring trouble to the collective! Of course, if it is a safety regulation, it will affect many safety issues! To this end, after realizing the importance of the regulations, I have greatly improved my self-management, and strictly abide by the workshop regulations in my work to ensure the accuracy and safety of my work.

Third, treat the work rigorously.

At work, I study and help with my work under the guidance of my master. But at the beginning, I sometimes relax myself because my work tasks are too "simple" and too complicated. But after a job, my work was found to have flaws and problems, and was severely criticized by the leaders.

After this experience, I really realized the responsibility of work! Recognize that prescription is the simplest job, and we must face it strictly!

Fourth, return to collective life.

In order to facilitate the internship, I moved into the company's staff dormitory. Although it is also a collective life, here, I should not only learn to manage my life independently, but also learn to adapt to the new interpersonal environment. Let me realize the difference of social life.

In this internship experience, I deeply felt the difference between the social environment and the campus environment in the process of adaptation, and also learned my own shortcomings in my work, which are all aspects I still lack! To this end, I will continue to strive to improve myself in order to make greater progress in the future social life!

Workshop internship experience 6. First of all, thank the school for training us and the company for giving us opportunities. In such an internship, we also understand the importance of practice. We need more different training methods to inspire our thoughts and let us step into the society better.

It is a new thing for me to work in the workshop at first, but after several days of exercise, our tasks are getting heavier and heavier, and our requirements are constantly improving, so it is difficult to have more ideas, whether it is enthusiastic study or active work, but I am too tired to speak with mechanical work. However, some students still maintain exuberant energy and set a good example for us, and I also began to reflect on whether my attitude towards learning is too lax. I need to study harder and work hard to have a good rest and keep fit.

By gradually adjusting my state, I gradually adapted to the busy work in the workshop, learned how to apply what I have learned to my work, and how to shorten my working hours, which also made me understand the difference between theory and practice. Besides, we should have our own judgment in our work, instead of following other people's ideas. Having our own ideas is what we should do in our internship.

Although we need to study independently in college, internship is different from study in college, because we do detailed study on the basis of existing knowledge and know the actual operation. We should not only think with our brains, but also practice. There is also the experience of consulting people in the workshop. In the process of learning, there should be not only books, but also teachers. Many problems can only be solved by the experience accumulated by others in the course of work, and it is difficult to find solutions in books.

At work, it is different from at school. You should think about it yourself in your study, but you need unity and cooperation at work. There are many reasons for a problem. We are not familiar with the work, and everyone is good at different aspects. Problems at work need to be discussed and solved by many people, and you can't show your ability just by thinking. This is not desirable.

Internship life is unforgettable. This internship also let us know the possible problems in employment and where the career prospects are, but we still have to go back to formal study, learn more knowledge and better prepare for entering the society.

Workshop internship experience 7 has been internship in the warehouse door group of pipe fitting workshop until Friday this week, and was assigned to the blanking group of pipe fitting workshop on Friday. In the past three weeks, I have learned a lot of workshop skills and a lot of psychological experience.

In the warehouse door workshop, I mainly follow the bonding process of the warehouse door skeleton and facade. I was not familiar with workshop work from the beginning, and now I can finish some work independently. When I first entered the workshop, I began to learn by observing the master's works. Slowly, the master taught me to stick tape on the skeleton. Although this is a very simple thing, I need constant practice and personal contact to do my best to stick to it evenly and effectively. Many times, another colleague in the group and I are helping to move the warehouse door, mainly because there is only one master in some processes, and he has to finish the work on the workbench on the warehouse door → complete the process → work under the warehouse door. This way of working will seriously increase the workload of employees and affect work efficiency, so we will help the master move the warehouse door and reduce their workload. Although the handling work will be very tiring, it provides an opportunity to observe and learn at various stations, and it is also a good opportunity to familiarize yourself with the workshop workflow and communicate with the staff master. Such as welding station, although the master does not allow us to participate because of its danger, we can know which parts of a warehouse door need to be welded by observation to ensure its firmness.

After a week or two of familiarity, the workshop masters became familiar with us and often taught us to do some other work, such as punching holes in the skeleton and installing core-pulling rivets on the skeleton. The masters not only taught us how to do it, but also taught us some skills to improve work efficiency and save labor. This week, because of the next batch of orders, I learned the application of cutting machine with Master Chen. This week's work is not too much. I have time to actually operate small machinery that I have never operated before, such as grinding, polishing, punching and cutting, and have a certain understanding of some mechanical operations.

I have benefited a lot from studying in the workshop, learned a lot of practical skills and gained a lot of experience. In the workshop, I think we should watch more, learn more and do more, so that we can learn something real. The most important thing is to communicate with the masters more and become one with them, so as to have more learning opportunities. The study during this period will certainly contribute to the future study and work in the workshop.

The experience of workshop internship has passed so quickly. In a blink of an eye, I have been alone in the workshop for three weeks. In this more than half a month, I learned a lot and grew a lot. Three weeks is very short, just a small step in my life, but I have taken a big step from school to society.

At work, I have a detailed understanding and profound understanding of the production of Linuoruite solar water heater. Understand every process on the water heater production line, and be familiar with the functions of the equipment on the water heater. It fills the blank of previous knowledge in this field and lays a solid foundation for future work. Life continued the routine of training in Shanghe more than half a month ago, and abandoned some bad habits in school before. Gradually change yourself from a student to a social person. Correct your mind and start your career seriously.

Relatively speaking, the internship time in the workshop is relatively short, three times a week, and I cherish every week in each workshop. Safety is the most important thing in the workshop. Before leaving the workshop, the company organized three levels of safety education, from company level, workshop level to team level. Security is no small matter, and security has everything. Later in the workshop life, I felt the meaning of this sentence more and more.

The first week, I was in the second workshop. The second workshop carries 80% of the equipment and technology of the whole production base. Almost all the punching machines and large equipment are in the second workshop, so the second workshop is also the workshop with the most dangerous sources in the production base. In addition, the second workshop is the starting point of the water heater production line. Food-grade stainless steel iron coils and colored steel coils are formed here through blanking, punching, screen printing on the outer cylinder, drum lifting, biting flat, welding the inner container, rib lifting, flanging, water testing and other processes. Finally, the qualified outer cylinder liner is transported to the third workshop for other processing procedures. The second workshop mainly has two production lines. The first line is mainly for mass production according to orders and various production requirements, and the second line is mainly for the production of small-batch water heaters such as customization. In addition, the second workshop also has a "Xinyue" production line imported from Germany, which specializes in producing Xinyue series of confined water tanks, which is more efficient than the general production line. Can complete all tasks from blanking to packaging. Unfortunately, in the week of the second workshop, the Xinyue line was not put into production. Due to technological reasons, in the stamping process, large equipment such as punching machine will inevitably produce a lot of noise in the working process; In the process of screen printing, it is inevitable that there is a lingering pungent smell of paint around, and various factors seriously threaten the health and safety of workers. At this time, the supporting labor insurance supplies have played a great role in protecting workers. Safe, everywhere.

The next three workshops are a series of processes, such as the foaming of the outer cylinder and the inner container, the assembly and packaging of various parts, which are output by the second workshop. The third workshop is also divided into primary and secondary lines, and the main line is mass production of household water heaters. The second line, this is the production and processing of orders such as small batch customization and export. The harm of the third workshop is much less than that of the second workshop, and the labor intensity is relatively weak. But the third workshop is the busiest workshop in the whole production base. Numerous processes make the third workshop seem busy. Often a person needs to go through three or four processes. At this time, our figure appeared on the production line far away from dangerous sources. Close observation of the production of water heaters and the hands-on operation of each process on the assembly line gives us a deeper understanding of water heaters from raw materials to molding to leaving the factory. The boring action on the assembly line makes us deeply understand the hardships of working as a first-line production worker. The warm guidance and cordial greetings from the staff gave us the warmth of home.

The final stage of the internship is the seminar. One workshop is relatively independent from the other two workshops. Because the other two workshops * * * completed the production of water heater liners. The first workshop is to process and assemble the solar collectors of water heaters until the final packaging and delivery. The main working procedures include bending and welding of copper tubes, layered fastening, framing, back plate pressing, gluing, heat preservation, plate core, sealing strip and glass assembly and packaging. It can be said that the production of a workshop is the core component of the whole solar water heater. Fortunately, during our internship, we met the production of flat solar collectors, which are rarely put into production. Fortunately, I participated in the operation of the whole production process. Because glass vacuum tubes need to be assembled in the workshop, it is necessary to handle fragile products like glass carefully, even glass tubes made of Lino glass. Occasionally, accidents such as broken glass tubes caused by improper operation or other reasons will ring alarm bells in our ears from time to time.

After three weeks of workshop practice, I can clearly understand the whole production process of solar water heater, and thus have a further understanding of the working principle of solar water heater. I have some experience in the work and life of the workshop. Every qualified water heater can not be separated from the concentration and dedication of each process, and can not be separated from the sincere cooperation of every employee. Teamwork is the perfect performance here. Linoret's achievement is the result of everyone's concerted efforts with Qi Xin. Good management methods are also one of Rhett's highlights. The cited 5s management methods include sorting (Seiri), correcting (Seiton), cleaning (Seiso), cleaning (Seiketsu) and finishing (Shitsuke). Comprehensive consideration of the overall situation of the production site environment, formulate feasible plans and measures to achieve standardized management.

Three weeks' workshop practice has benefited me a lot. It was only in the last workshop that an accidental discovery puzzled me. I still remember a water heater tank hanging on the right-hand wall of a workshop rest area sink. This is the only water heater I have ever seen put into use in the factory. Looking at the Linoret label on the water heater, the water tank is unfamiliar gray. Driven by curiosity, I saw the nameplates of "A O Smith" and "Io Smith" stamped on the bottom. I can't help feeling confused. As a famous water heater manufacturer in China, the only water heater used in my full water heater production base is actually not made by myself. I even put on my own label. Is it because there is no room for a small collector on the roof of the huge factory building, or because of distrust of your own brand, or because the marketing ability of the other party has to make people sit up and take notice?

Finally, I want to say: as a member of the engineering department, we will face the promotion and sales of products. If you don't believe in yourself, how can you make others believe in you? Believe in yourself, you can do it!

Workshop internship experience 9 I practiced in the welding workshop for more than a month. During the internship, with the correct arrangement of workshop leaders and the careful care of team leaders and all team members, I successfully entered the internship role and gained some experience.

It was reported on May 4th, and the training specialist took us to the First Car Body Factory for two days the next day. Just entering the workshop, I was scared by this bad working environment. At that time, I was thinking, should I give in? Next to it, the classmates who came in together complained. Later, I calmly thought about it, and now that I'm here, I'll do it well, just to hone my willpower. There are still gains. After the next day, all the girls who came in with me became deserters, leaving me a girl, and my heart began to shake again. But calm down and think about it, everyone else can survive, so can I. After two days of observation, we continued to train. The company arranged safety training and production training for us, mainly saying that safety training means paying attention to production safety, putting on work clothes and hats before going to work, checking whether all tools are complete and damaged, observing the surrounding environment and getting familiar with the working environment. Production training is to pay attention to safety and welding quality in production.

According to the arrangement of the leader, I was lucky to be assigned to the second car body factory, which is much superior to the environment of the first factory. According to the arrangement of the workshop section, I worked as an intern in Class 034, Class A, welding side walls.

On the first day of work, I learned to operate with the master of the production line. When I first stood in my post, I felt that I didn't know anything. I rely on my master's guidance and hold a welding torch. The first feeling is that it is too heavy and looks beautiful and romantic.