Be sure to check these when you get the camera.

Be sure to check these when you get the camera.

Use directly without inspection

1. Never use the camera directly without inspection. Check whether there are traces of secondary sealing on the camera packaging, and whether the sealing and anti-counterfeiting marks are damaged. There is something wrong with the seal, so you must refuse to sign it! The anti-counterfeiting mark is located in the upper right corner of the package. You can see the digital security code of 16 digits when you tear it open. You can go to Canon's pipe network to inquire.

2. Check whether the camera accessories are complete, including the body, lens, battery, adapter and shoulder strap.

3. Check the model, check the integration of four milliamps, get the camera, and check whether the camera model is consistent with the purchase first. Four ma includes: the serial number below the barcode on the camera packaging box, the serial number at the bottom of the camera, the serial number on the camera warranty card and the camera serial number.

4. Do not set the storage format. Many friends always feel that the photos taken by the camera lack a little feeling, and we want to do color matching later. At this time, we need to set the camera's photo format-RAW format IPG format is a compressed format, with small files and less space: it is convenient for transmission, and it is more convenient to look at the picture directly, but the picture quality is average. RAW format can retain more colors and details of photos, and there will be more room for adjustment in later retouching.

5. Shoot the sun directly. You can't shoot the sun directly with your camera, especially at noon. When the sun is near the composition range, the sunlight will pass through the lens and cause a fire. In addition, using the viewfinder to watch strong light or sunlight may cause permanent visual damage. If you have to shoot, remember to dim the light with bud's high-powered ND lens.

6. Shoot a pure black or pure white background, and shoot a white wall or pure black background at the camera. Because there is no main body, the camera is likely to lose focus. If shooting is necessary, set the focus mode to manual mode for shooting focus.

Batteries and memory cards

Many friends can't wait to put the battery on when they get the camera, but when they take it out, they find that the camera is dead soon. Therefore, please charge the battery immediately after taking the camera out of the box.

1. Charge the battery.

① Remove the battery protection box. ② Put the battery into the battery box. (3) Insert the power cord of the charger into the socket continuously. The orange light flashes when charging, and the green light is always on when charging. The new machine usually needs to be fully charged for 4 hours, and then it can be charged for 2-3 hours.

2. You can take photos without installing a memory card.

The camera can only take pictures if it is equipped with a memory card, otherwise it can't store the influence. 64G/ 128G is enough for daily shooting. 95MB/S marked on the card surface refers to the storage speed. If the camera shows "BUZY" when shooting, the card speed is too slow.

Use an ultraviolet mirror

Many friends who start with cameras don't care about this problem, or don't install UV mirrors and shading devices in order to save a little budget, which is very wrong. UV mirror and hood can protect the lens from the sun. If you accidentally hit the camera in daily shooting, those protected by UV mirror and hood will only damage one filter. Without these, it is likely that your lens will be broken.

4. Be sure to set autofocus.

If you don't choose the correct focus mode, the camera has auto focus/manual focus mode. You will find that taking pictures is always blurred. Let's start with the reason. The first reason is that the lens is too close, and the focal length of the camera lens is the closest. If the subject in the lens is too close, it is impossible to focus. The second reason is that the focusing method is wrong. The camera has two focusing modes: manual/autofocus mode. Manual focusing requires rotating the focusing ring.

5. Don't let the lens lock be unlocked.

Some zoom lenses are locked when they are put away. You need to hold down the locked sliders and rotate the lens before you can use them normally. Otherwise, the camera will always be locked and no photos will be taken.

6. Change the lens at will

In daily shooting, we often encounter scenes that need to be shot with different lenses, so many people will ignore this detail. When changing lenses, try to choose indoor or clean environment. Changing lenses in magnetic field, static electricity, dusty, humid or high and low temperature environment will accelerate the aging of equipment.

7. Wipe the lens at will

Don't wipe the lens with corner tissues. Wiping the lens with corner paper towels is easy to scratch the lens coating and affect imaging. The lens is clean: the floating dust and hard particles on the lens can be blown off by a blower, and the fuselage is clean: the surface dust can be blown off by a blower, and then the lens body and the fuselage can be wiped with a clean rag.

8. Unable to select lens

When shooting, the picture taken with different focal lengths has different effects. Friends can choose to shoot portraits according to their own needs: choose a large aperture fixed-focus lens, shoot scenery/architecture: choose a wide-angle lens, concert/lotus: choose a telephoto lens, sweep the street/travel: choose a zoom lens.

9. Don't apply shooting parameters

Camera parameter is not a fixed value, it is influenced by many factors, such as shooting environment, time, light and so on. It is impossible to take the same photos with the same parameters in different environments.