Tell me about your experience installing computer systems?

It takes a long time. The first time I installed the system was Windows 98, which was genuine and not that easy to use. I gave up after persisting for a few days. Later, I started to try to install the system myself after Windows 8. , if you want to say what you gain, it is that you can do your own work without having to reinstall the system. My experience is that when I installed the system for the first time, I carefully read the visual interface. This is the only way to say whether the system installation is good or not. Can prove it.

I learned how to install a computer operating system by myself because I didn’t want to ask for help or spend money when the computer operating system needed to be reinstalled. I had little computer knowledge at that time but still liked to mess around with the computer, so the computer often malfunctioned due to my misuse. There was a system problem. At that time, the best solution for problems with the computer operating system was to reinstall the operating system. At first, I always asked relatives and friends who knew about computers for help. Later, I asked computer repair companies to spend money to install the operating system, and asked relatives, friends and After all, spending money to solve problems is not a long-term solution. There is a saying that it is better to seek help from others than to ask for yourself. I bought many computer-related magazines and books at that time, and they all taught how to install the operating system. I followed the books to learn how to install them. .

I remember that I learned to install the operating system in 2003. The operating system at that time was still Windows 98. How to install Windows 98 at that time? My computer host also had a floppy disk reading device. First, I used its "Make Boot Disk" tool in the Windows 98 operating system to create a Windows boot disk on the floppy disk, and decompressed the Windows 98 operating system to a partition other than the C drive. At that time, the operating system could directly boot through the floppy disk to enter the DOS operation interface, then format the C drive through DOS commands, and then use DOS commands to enter the partition and folder where the Windows 98 operating system is located. After entering, run Windows directly under the DOS command. 98 folder, and then enter the operating system installation interface to install.

At that time, I learned how to set up BIOS for floppy disk startup and how to use DOS commands. Now I still remember several common DOS commands: format C drive "format c:", enter D drive "d:", view File "dir", enter the Windows 98 folder "cd windows98", exit the folder "cd..", these steps of installing the operating system need to be practiced many times before you can operate them skillfully. Remember to memorize all the operation methods at that time. When installing the operating system or when you have time, take a notebook to read and memorize these operating methods and commands.

Speaking of how to install the driver after the operating system is installed, I was studying whether to install the driver after all drivers are installed and then restart the computer according to the driver installation prompts, or to restart the computer immediately when installing the driver. For the computer, for a while, I just restarted the computer after all the drivers were installed for the drivers to take effect, and there were no problems. Later, after checking the information on the Internet, I felt that this method was not advisable, so I installed the driver and restarted when the computer was prompted to restart. After practicing installing the operating system many times, I was finally able to install the operating system from beginning to end independently. I felt very accomplished and I was really happy for several days.

After that, I read in the newspaper how to use GHOST to back up the operating system. After learning it, I used it. I felt it was so convenient. I only need to install the operating system once and install all the required software in the operating system. The partition where it is located can be restored directly after using Ghost backup. This method has been used for a year or two, but now it is basically no longer used unless there is a special need.

As time goes by, Microsoft has launched windowsxp, windowwos 7, windows8, widnwos 10 and many server-specific operating systems. The installation method has also changed from floppy disk boot installation to installation through CD and U disk. The operating system is also much more convenient than before. There are many tools on the Internet for making U disk boot disks. For example, the rufus I am using now is very good. It can directly write the operating system image to the U disk and make it into a system installation disk, and then set it in the BIOS. After the U disk is booted, the U disk boots into the operating system installation interface and goes to the next step as required. Here, the built-in drivers of Windows 10 are quite complete. After installing the operating system, other programs have basically been driven successfully. As long as Just update the graphics card and sound card drivers. You must know that before installing the operating system, I had to download and back up the network card driver to a USB flash drive in advance. Because after the operating system was installed, there was no network card driver and I could not access the Internet and could not download the driver. I could only use another computer to download it to the USB flash drive, and then transfer the hard drive to the USB flash drive. Plug it into the computer and install the network card driver.

After talking so much, I feel that with the development of the Internet, there are all kinds of instructional pictures, texts and videos for installing operating systems, and now there are many convenient tools for installing operating systems, and the operating system itself is relatively easy to install. Fool-proof, it feels like it’s getting easier and easier to install an operating system now.

Over the years, I recounted how confused I was at that time,

It was hard to choose between reality and fantasy

…

Speaking of installing a computer, it caused My long memories...

I started to have close contact with computers in 1994. At that time, computers were expensive and most people were not allowed to operate them carelessly. I wanted to be a second-class person. I liked learning and studying, so I started studying computer technology. So I tried every means to get close to the computer and learn how to install, operate and use the computer.

I remember that when installing win95 on the 486 computer, more than 10 installation floppy disks were used. One by one, they were inserted into the floppy disk drive for installation. Those who were qualified to install were all top leaders in the unit, ordinary people. Don't touch the door.

Later, when 586 computers became popular, I had the conditions to try to install it. Remember to install the win98 system using a CD. The installation process was very long and took at least more than an hour. I can recite the installation serial number smoothly. ah.

Later on, when installing the computer, I began to use various Ghost versions of installation CDs, and the system installed was also XP. At that time, various experts developed various XP installation CDs. Of course, this is not... Oh, but it's very hard. The company smiled slightly, ...

Later, they started to use U disk to install the system. U disk installation system can install either the original system or the ghost version, and Installing a computer requires some learning, and you can't just jump in and do it. First, you have to figure out whether the computer is UEFI+GPT or legacy + Mbr. If you can't figure it out, something will definitely go wrong. More The most important thing is to remember to back up important data [face covering].

We support the installation and use of genuine versions, but if you don’t have much W in your pocket, try your best to support it...

.

I installed it once, under the guidance of a friend, but then I forgot about it.

What is there to say? Download the pure version of the system online and install it step by step. If you have money, buy the genuine version. Key activation, if you don’t have money, you can find a registration code to activate it yourself. There is no technical content in installing the system

My experience is that I used a CD at first, then PE, and then the ISO was directly decompressed in the root directory of the U disk. .

I still remember that the system I installed before required various commands. Now ghost can do it with one click. Technology is advancing so fast!

The first time I installed a system was when I was a freshman. I had just entered college at that time. I was studying programming in the next semester and needed a computer, so my brother bought me an Acer computer. , good guy, when I took it back and turned it on, I entered a black window. Later I found out that it was Linux. I was a college student and had no money. I thought that reinstalling was just those steps and I had to charge 50. I didn’t want the black-hearted store to make money, so I reinstalled it myself. I also learned some bios configuration and some tips on USB disk installation.

When I was in college, I got my first laptop, an Acer acer4752g. I found that I was very interested in computers. Later, I studied dismantling and cleaning, reinstalling the system of laptops, and got to know mbr and gpt partition table, learned how to install the system on pe, install the system on the hard disk, repartition and other operations. Later, I visited the Worry-Free Boot Forum and learned about startup boot repair, etc., and then I started to get in touch with Linux. In 2012, I got in touch with Startos, Deepin, Ubuntu, etc., and learned to install dual systems. Visit the Vision Forum to learn how to pretend to be a black apple. Once when installing win10, the bios chip was damaged. I bought the ch341 chip burning tool and bios chip online, re-burned the program, and the computer booted successfully.

Download the system image from MSDN and use image