Five steps of ceramic art What should we pay attention to when making ceramic art?

Everyone should have heard of pottery, which is a technology used to make ceramics. Nowadays, many people want to learn this craft by making their own products, but they don't know how to make pottery. In fact, pottery technology is not very difficult. What are the five steps of pottery? What should we pay attention to when making pottery? Everyone should have heard of pottery, which is a technology used to make ceramics. Nowadays, many people want to learn this craft by making their own products, but they don't know much about the method of making pottery. In fact, ceramic technology is not very difficult, but there are some matters needing attention when operating. Now, what are the five steps of pottery? What should we pay attention to when making pottery?

Five steps of ceramic art

Five steps of ceramic art: preparing materials, drawing blanks and forming. Dry the blank paper and put it under the lamp. After drying, you can engrave the words you want. Put a beautiful coat on the cup and glaze it. Put the cup into the machine and the fire will reach 1240 degrees. Take it out and eat it.

1, blank drawing forming is the centrifugal movement generated by the blank drawing machine. During the rotation, the semi-solidified clay with water is stretched and formed according to the design idea. The biggest feature of making pottery with clay chips is that it is easy to form a large and complete surface and the molding speed is faster. The molding process of clay board is very demanding. In order to do a good job of clay tablet molding, we must master the technical problems such as clay tablet making, the perception of clay materials used and the combination of clay tablets.

2. Mud strips are rolled, and mud strip method is a rolling technology formed by mud strip construction. The mud stick can be rubbed by hand or squeezed by a mud stick pressing tool. Plain painting is painting with pigments on vases, bowls, plates, cans and other utensils (plain color) that are burned in plain. Plain firing: after the mud is dried, it is put into the kiln, and the secondary plain firing is carried out to about 800 degrees to harden the mud, and then it is cooled and taken out of the kiln.

3, glazing, plain-fired porcelain tires can be glazed, first apply the inner glaze.

4. Normal launch. Glazed bottles need to be put into the kiln again for normal firing. Normal firing requires high temperature firing, generally between 1280 degrees and 13 10 degrees.

5. Decal: If the bottle body needs other words such as trademarks and alcohol content or silk-screen patterns, the surface of the burnt bottle body should be pasted with glazed decal paper, and then baked in the oven, about 700-800 degrees.

What should we pay attention to when making pottery?

1, alumina (calcined)? Used for glaze matching and boron plate sand

Inhalation may cause irritation or lung injury. Wash your hands thoroughly after use.

2. Gray (various plant ash)? Glazing material

This raw material combines with water to produce strong alkali, which is corrosive to the skin. Wear goggles and rubber gloves when treating plant ash with water.

3. Barium carbonate (China)? Prepare clay and glaze raw materials

Irritating to eyes and nasal cavity, improper use will lead to barium poisoning and lung function damage. Soluble, contact will cause skin allergies. Eating it can lead to withdrawal, spasm, heart disease and respiratory failure. It also has a great influence on the nervous system and blood circulation system. Glazes containing barium carbonate should be avoided for direct contact with the surface of food.

Through the introduction of the above article, I believe that everyone should know what are the five steps of ceramic art and what should be paid attention to in the production of ceramic art. Although the five steps of ceramic art seem simple, they are also difficult to operate in practice, especially for inexperienced friends. However, if you pay more attention to the points mentioned above, you can also make the products you want.