Simple method of beautiful sewing Detailed explanation of beautiful sewing steps

1, method: the seam depth can be directly stitched, and it can be stitched twice if it is more than 3 mm, and the seam amount can be saved if white cement is used as the backing for more than 5 mm.. After the white cement is dry, it should be slit 2 ~ 3 mm deep and pasted with masking paper (about 0.5 mm wide from the slit). The cross of the textured paper needs to be cut off.

2. Unscrew the bottle cap of the sewing agent, unplug the plug, install it on the glue gun, push the glue gun to discharge, and then install the glue nozzle. Because the AB material should be fully mixed, the waste in front of the sewing agent can't be used, about 40cm. Finally, cut the glue mouth to the width of the seam with ceramic tiles.

3. Start sewing, evenly pump the sewing agent into the seam (it is recommended that every construction is about 1m), then immediately press the seam with the blank holder ball, and tear off the textured paper immediately after pressing. Then use alcohol or white vinegar to wipe off the remaining materials on the tiles. When it is sewn, it will be cured.