Balcony glass guardrail quotation Balcony glass guardrail installation

Nowadays, glass guardrails are very common in our lives, especially balconies. And now most balconies use glass guardrails. Balcony glass guardrail is mainly composed of tempered glass and steel guardrail. And now the appearance of the sunshine glass guardrail is also very beautiful. Therefore, friends who have higher requirements for life can enjoy the sunshine bath at the glass guardrail of their balcony. But everyone must be careful when installing the balcony glass guardrail, and must consider the safety. Then the next small series will tell you about the balcony glass guardrail.

Quotation for balcony glass guardrail

Toshiba/Toshiba Straight Ladder Wide Frame Stainless Steel+Glass? 1600.00/ piece

Dims DMS-B2807 swimming pool glass guardrail stainless steel+glass? 500.00/ m2

Mingxing guardrail balcony glass guardrail hot dip galvanized steel pipe+glass? 60.00 Yuan/m2

Longteng inclined ladder narrow frame stainless steel+glass? 308.00 Yuan/m2

Xinyi Anbu HY-206 Straight Ladder Wide Frame Tempered Glass? 1650.00/ piece

Installation of balcony glass guardrail

1, key points of plane installation of glass guardrail

The glass guardrail must be made of tempered glass or laminated glass. The thickness of tempered glass should not be less than 12mm, and the glass should not be in direct contact with rigid joints. There should be an elastic gasket between them. When the embedded glass guardrails on both sides are used in the design, there should be a gap of more than 3mm on both sides where the glass extends into the column groove, and the gap should be filled with glass sealant. The depth of glass embedded in the groove should not be less than12mm.

2, glass guardrail base column installation points

When the guardrail replaces the column with glass, there should be a gap of about 8mm between the glasses, and a gap of about 8mm between the glass and other materials, and the gap should be filled with sealant. The base of the glass guardrail is the key part of fixing the guardrail in the installation renderings of the glass guardrail. Generally, angle steel needs to be processed and combined into fixed parts to fix the glass. Both sides of the fixing piece are fixed firmly with expansion screws or welded for pretreatment, and are not loose. The bottom of the glass and the fixed parts are padded with rubber bearing seats with hardness of 80 ~ 90. The depth of glass extending into the fixture is more than 1003~6mm, and the glass extends into both sides of the fixture (that is, between angle steel and steel plate). There should be a gap of about 6mm between steel plate and glass, and a gap of about 6mm between glass and other materials, and the gap should be filled with glass sealant. After installation, make sure it is safe and firm, and the surface of guardrail base is covered with decoration. It should be noted that the covering material cannot directly contact the glass, and the gap between the covering material and the glass needs to be filled with glass sealant.

The above is the balcony glass guardrail that Bian Xiao told you about. I hope everyone can get something after reading it. Everyone is concerned about the balcony glass guardrail. Balcony glass guardrail is mainly made of steel guardrail and tempered glass. And the balcony glass guardrail has very good aesthetics. You can choose or customize the balcony glass guardrail that suits you according to your own needs. In addition, the balcony glass guardrail can also play a role in wind and dust prevention. But also has good heat insulation performance.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~