Joke Collection Website - Talk about mood - FTP upload file error.

FTP upload file error.

150 opens the ascii mode data connection of /bin/ls.

426 The data connection is closed, and the transmission is stopped.

This situation may be that a firewall (or proxy) is installed in your network, and the firewall (or proxy) prohibits the connection from a remote location, as shown in 426 Data Connection Closed and Transmission Aborted. At this time, passive transmission mode (pasv mode) can be used to avoid this limitation and transmit data.

The solution is to set the site setting of ftp label to passive mode pasv mode. Similarly, if a 200-port command succeeds in front of a netizen.

The above method is also used when there is no connection.

Connected. Waiting for a response.

220 serv-u FTP server v4.0 for Winsock is ready. ...

Anonymous user

Sorry, anonymous access is not allowed.

give up

Anonymous login is not allowed

Connected. Waiting for a response.

220 serv-u FTP server v4.0 for Winsock is ready. ...

User testing

33 1 user name ok, you need a password.

Through xxxxxx

530 is not logged in.

give up

Generally, it is the information that appears when the password is entered incorrectly. Wrong password!

Connect to xxx.xxx.xxx.xxx, port 2 1 (# 1).

Error: Connection timed out

This means that the other party is not turned on, or it may be that the other party is not in your access range. It may be that the server in the community is maintaining.

Connect to xxx.xxx.xxx.xxx port 2 1 (# 1).

Error: Connection denied.

This generally means that the other party has turned on the phone, but has not started the ftp service (not started the serv-u).

It is also possible that the other party does not provide services on this port.

Connect to xxx.xxx.xxx.xxx, port 2 1 (# 1).

Connected. Waiting for a response.

Disconnected from the server.

The connection attempt failed. Waiting for retry ...

It's really unlucky to receive this news. It is very likely that you set the retry time too short, and the server will block you!

Connect to xxx.xxx.xxx.xxx, port 2 1 (# 1).

Connected. Waiting for a response.

User xxx

33 1 user name ok, you need a password.

Through xxxxxx

No login, unauthorized ip address.

give up

No registered ip! Or the registered ip is different from what you downloaded now! Re-register quickly!

227 enters the passive mode (2 18, 3, 87, 224, 10, 232).

retr hfdx-tsoaf.sub.rar

550 Sorry, download points are insufficient-upload first.

Transmission failed!

The transmission queue has completed.

Your traffic is not enough, buy again!

Connected. Waiting for a response.

220 serv-u FTP server v4.0 for Winsock is ready. ...

User user

42 1 Too many users-please try again later.

It means that the download group you belong to has reached the maximum number of downloads at present. Please try again later. Those who have been trying to connect with download tools such as Flashget, please tell me about the IP that will be blocked by the server for a while.

150 opens the ascii mode data connection of /bin/ls.

426 The data connection is closed, and the transmission is stopped.

The solution is to set the site setting of ftp label to passive mode pasv mode. Similarly, if a 200-port command succeeds in front of a netizen.

The above method is also used when there is no connection.

Connect to xxx.xxx.xxx.xxx, port 2 1 (# 1).

Error: Connection timed out

This means that the other party is not turned on, or it may be that the other party is not in your access range.

Connect to xxx.xxx.xxx.xxx port 2 1 (# 1).

Error: Connection denied.

This generally means that the other party has turned on the phone, but has not started the FTP service (not started the Serv-U).

It is also possible that the other party does not provide services on this port.

Connect to xxx.xxx.xxx.xxx, port 2 1 (# 1).

Connected. Waiting for a response.

Disconnected from the server.

The connection attempt failed. Waiting for retry ...

This news is really unlucky, and you are likely to be banned by the other party.

It doesn't matter if it's only a few minutes or hours or a day, otherwise you can only put in a good word with the webmaster and ask him to unseal it for you.

1 10 Restart the mark reply. In this case, the text is accurate, not left.

Specific implementation; It must be: tag yyyy = mmmm where yyyy is.

User process data flow tag and mmmm server equivalent tag (note

The space between the tag and "=".

Restart flag response. In this case, the information is accurate and does not need special treatment; It can be seen as follows: in the tag yyyy = mmm, yyyy is the user process data stream tag, and mmmm is the corresponding tag on the server side (note the space between the tag and the equal sign).

120 service is ready in nnn minutes.

This service is provided at NNN time.

125 data connection has been opened; Transmission begins.

The data connection has been opened and the data transmission has started.

150 file is in good condition; The data connection is about to open.

The file status is correct and the data connection is opening.

200 orders. okay

Command execution ended normally.

Command 202 is not executed, which is redundant in this site.

Command not executed, this site does not support this command.

2 1 1 System status, or system help reply.

System status or system help information response.

2 12 directory status.

Directory status information.

2 13 file status.

File status information.

2 14 help message. About how to use the server or specific meaning

Non-standard command. This reply is only useful for human users. Help information.

About how to use this server or special non-standard commands. This reply is only useful to people.

2 15 name system type. Where NAME is the official system name in the list.

In the number assignment document.

Naming system type.

220 service is ready for new users.

The service of the newly connected user is ready.

22 1 service closes the control connection.

Control connection closure

225 data connection is open; There is no transmission in progress.

The data connection is open, and there is no data transmission in progress.

226 Close the data connection. The requested file operation was successful (for example,

File transfer or file abort).

Closing data connection. The operation that requested the file ended successfully (for example, file transfer or termination).

227 enters the passive mode (h 1, h2, h3, h4, p 1, p2).

Enter passive mode

230 user login, continue. If appropriate, log off.

The user has logged in. You can cancel it if you don't need it.

250 request file operation is good, complete.

The requested file operation completed successfully.

257 "Path Name" has been created.

The path has been established.

33 1 user name ok, you need a password.

User name already exists, and password is required.

332 login requires an account.

The account that needs to be logged in.

350 Request file operation to wait for further information.

The operation on the requested file requires further information.

42 1 service unavailable, close control connection. This may be an answer.

Any command if the service knows it must be shut down.

Service unavailable, control connection closed. If the service thinks it must be shut down, this may be a response to any command.

42 1 Too many users-please try again later.

There are too many users. I'll try again later.

425 Unable to open data connection.

Unable to open data connection.

426 connection closed; Transmission aborted.

The connection is closed and the transmission is aborted.

450 The requested file operation was not performed.

The operation on the requested file was not performed.

45 1 The requested operation was aborted. Local error in processing.

The requested operation was aborted. A local error occurred during processing.

The required action was not taken. The system is out of storage space. document

Unavailable (for example, the file is busy).

The requested operation was not performed. The system is out of storage space. File not available

Syntax error, unrecognized command. This may include the following errors

The command line is too long.

Syntax error, unrecognized command. This may be because the command line is too long.

There is a syntax error in the 50 1 parameter or argument.

Syntax errors caused by parameter errors

The 502 command was not executed.

The command was not executed

503 service unavailable's command sequence.

The order of the commands is wrong.

504 No command was executed for this parameter.

The command failed to execute due to an incorrect parameter.

530 is not logged in.

Generally speaking, the password is wrong.

Sorry, anonymous access is not allowed.

This is not an anonymous login.

530 not logged in, unauthorized IP address

This is a little troublesome. Your IP is not within the IP range allowed by the webmaster. Just contact the webmaster and ask him to add your IP segment to the allowed access list.

530 is not logged in, only one (or maybe two or three) sessions from the same IP are allowed at a time.

Each IP can only open one (or maybe two or three) downloads, so don't use multi-threading, and be careful to block you.

532 Account where files need to be stored.

Account information is required to store files.

The action required by 550 was not adopted. File unavailable (for example, file not found, no

Visit).

The requested operation was not performed and the file is not available.

55 1 The requested operation was aborted. The page type is unknown.

The requested operation was aborted, and the page type is unknown.

552 The requested file operation was aborted. Exceeded storage allocation (for the current

A directory or data set).

The operation on the requested file was aborted. Exceeding storage allocation

The required action was not taken. File name is not allowed

The requested operation was not performed. File name is not allowed

This error is similar to the http protocol and is roughly as follows:

2 Start-Success

3 at the beginning-the question of authority

4 Start the file problem

5 Start-Server Problem