How does the set-top box connect the TV and the router?

How many ways can a TV set-top box connect to a router?

There are two ways to connect the TV set-top box to the router: wired and wireless, and the TV can only be connected by wire. Let's be specific.

First of all, the method of connecting the router

At present, most routers have wired network ports and wireless WIFI, and set-top boxes have wired and wireless connections.

1, wired connection

Wired connection is a network cable connection. Both set-top boxes and routers have RJ_45 ports, which are usually called network ports. At this time, only one network cable is needed to connect the set-top box and the router.

The advantage of wired connection is that the internet signal will not be disturbed, and the signal is very stable. The disadvantage is that the layout of the network cable will occupy the family space.

2. Wireless connection

The wireless connection is a WIFI connection. Both the set-top box and the router are equipped with wireless network cards. At this time, they can only connect through WIFI.

The advantage of wireless connection is that it is connected by wireless signal and does not occupy family space. The disadvantage is that it is easily disturbed by the surrounding environment and the signal is unstable.

Second, connect the TV.

There is no so-called wireless connection between the set-top box and the TV, only wired connection, which is generally through HDMI and red, yellow and white tricolor lines.

Most TVs support HDMI interface, which is specially used to transmit high-definition video.

Others use old-fashioned TV sets, which have no HDMI interface and can only be connected with red, yellow and white wires.

Therefore, the router connected to the set-top box can be wired or wireless, and there is only a wired connection when connecting to the TV.

How does the wifi set-top box connect to the TV?

The TV and set-top box should be connected by HDMI data cable.

After the connection is completed, turn on the TV, first press the signal source key (signal input) with the TV remote control-a dialog box appears on the screen-up and down keys-prompt-point to NDMI——OK or OK.

Then turn on the set-top box and use the remote control of the set-top box to tune according to the provided steps. If the input signal of the set-top box is normal, you can watch the program.

The cable that comes with the TV is in HDMI format. Use this cable to connect the TV and the set-top box.

In some cases, the IPTV set-top box needs to be connected to the LAN port designated by "Light Cat", and the specific designation of LAN port is subject to the local actual situation. Unless otherwise specified, you can connect to any LAN port.

Connect the set-top box and router as follows:

1. First, the data line from insert link to the set-top box.

2. Plug the other end of the data cable into the TV so that the set-top box can be connected to the TV.

3. After connecting the set-top box and the TV, turn on the TV.

4. Open the settings page after turning on the TV, and you can see that there is no internet connection at present. Click to enter the "Network Settings" page.

5. select "wifi".

6. Then select the wifi connection of the wireless router at home.

How does Unicom set-top box connect to router?

Setting method:

1. First, connect the network cable to the network cable interface of the set-top box. If the TV supports HDMI interface, please connect the set-top box to the TV. If it is an old TV, you need to connect the set-top box to the TV through the AV interface.

2. Start the TV and set-top box, and switch the TV signal source to HDMI mode or AV mode. The startup page of the set-top box can be displayed.

3. Use the remote control of the set-top box and press the setting key to enter the Unicom TV setting interface.

4. Select System Settings. At this time, you will be asked to enter the management password, which generally defaults to (632 1).

5. Select PPPOE mode and enter the broadband account connection and password. Unicom TV account and password, click OK.

6. Click OK to automatically enter the advanced setting interface. At this time, select restart, and IPTV can be watched normally after the set-top box is started.

How to connect the router, the cat, the set-top box and the TV?

1. Step 1, prepare an AV cable, one end of which is plugged into the AV output interface of the network set-top box, and the other end is plugged into the AV input interface of the TV.

2. Connect the set-top box and turn the TV to AV 1, as shown in the figure below.

3. Then there is the network interface, with one end connected to the TV and the other end connected to the set-top box, as shown in the figure below.

4. The next step is to find the HDMI port and connect it with an HDMI cable. As shown in the figure below.

5. After all the connections are finally completed, turn on the TV and you can use it, as shown in the figure below.

How does the set-top box connect to wifi?

The operation method of connecting smart TV to wifi (taking Hisense Smart TV as an example).

First, connect the computer and the router, and set the router to connect to the broadband network.

1. Connect the broadband cat, router and computer as shown below. Connect the cat and the WAN port of the router with a network cable, so that the router can receive network signals; Then connect the LAN port of the router with the network port of the computer host with a network cable, so that the computer can receive the network signal sent by the router.

2. Turn on the power of the cat, router and computer; Open a browser on your computer, enter the router setup URL (such as TPLink) "191.168.1",enter "admin" in the pop-up username and password dialog box, and click OK to log in to the router setup interface.

3. In the router setting interface, click the WAN port setting under the network parameters on the left, enter the broadband account number and password of the user's network, and then click Save; The router can successfully connect to the broadband network.

4. Next, set the wireless network user name and password of the router, click Wireless Settings on the left, enter the wireless network name and corresponding password, and click Save to complete the wireless signal setting.

5. After completing the router setup, exit the router setup and restart the router. At this point, the computer can connect to the router to surf the Internet, and you can open the webpage to test the Internet at will.

Second, start setting up the TV to connect to the wireless network.

1. Requirements: TV set, networked wireless router.

2. Start the TV and use the remote control to enter the system setting interface of the TV.

3. In the system settings interface, select "Network Settings" on the left; Then select "WIFI direct connection" on the right.

4. After selecting wifi direct connection, you can see the nearby wifi signal, select the wifi signal where the user is located, and click enter password to connect.

5. After the connection is successful, the router will automatically assign an IP address to the TV. After the TV obtains the IP address, it means that the TV has successfully connected to the wireless network.

6. At this point, the user can exit the settings and return to the network TV interface of the TV set, so as to select and watch network TV programs.