What does the tonality of the pole mean?

The tonality of fishing rod originally means that the overall curvature that the carbon tonnage of carbon rod can achieve under the overall tension is tonality, which means that the tonality of the same rod is different with different carbon tonnage. So how do you divide tonality? In fact, the division of tonality is to make the fishing rod adapt to the needs of different fish and different fishing methods, and meet the habits and hobbies of fishing enthusiasts.

Then there are three kinds of tunes as needed: the main tune, the original tune and the first tune.

But there are also special tone sandhi, such as a skill, which is innate. There is no vibration, and the only difference between vibration is the so-called medium hardness. Difficult to adjust. Super difficult. The bending point of carp is different due to different forces.

This is also the obvious difference between parallel and vibrating handfeel.

Let's talk about the structure of parallel inheritance and vibration:

Parallel rods, especially high-end parallel rods, are not made of one material, and the material composition of each rod segment is different, that is, the contents of carbon fiber and resin are different, which leads to different elasticity and hardness between rod segments, even the front and rear ends of the same segment will be different. Insert one segment into another to form a parallel connection, and the same segment can be made thinner at the back end than at the front end.

When stressed, the natural thin end bends first, which is typical of Yamato.

V-joint design, such as natural and fire, can bend the whole rod in the third section or handle section when stressed. This produces the so-called pitch and main tone. Tone modulation with the rod means that the main bending point of the rod can move with the force, which is a typical natural one. Because of the different structure and design, the vibrator can't be a structure with thick front and thin back, but a structure with thin front and thick back. The pole naturally bends from the tip of the pole to the handle, so naturally there will be no soft front and hard back, and there will be no stress bending at the back end, so naturally there will be no tonality.

Extremely hard first tune (1: 9 key): after the fishing rod is stressed, the main bending point is at the front end of the fishing rod (the bending point is at one tenth). A first direction of that rod)

Super hard tone (2: 8 key): After the fishing rod is stressed, the main bending point is behind the front end of the fishing rod (the bending point is two tenths). A first direction of that rod)

Hard sound (key 3: 7): After the fishing rod is stressed, the main bending point is in the middle of the fishing rod (the bending point is three tenths). A first direction of that rod)

Medium hard tone (key 4: 6): After the fishing rod is stressed, the main bending point is slightly in front of the middle of the fishing rod (the bending point is about ten tenths). A first direction of that rod)

Light tone (key 5: 5): After the fishing rod is stressed, the main bending point is in the middle of the fishing rod (the bending point is five tenths). A first direction of that rod)

Body adjustment (lower than 6: 4 adjustment): after the fishing rod is stressed, the main bending point is behind the middle of the fishing rod (the bending point is six tenths. A first direction of that rod)