What is the principle of rice sheller?

The principle of rice sheller is that the rice between rollers is broken and torn by a pair of cots that don't rotate in the opposite direction, which exceeds the purpose of hulling.

When the hulled materials pass through the chaff separation chamber, the mixture of chaff and rice husk is separated by wind. The husker is a kind of grain processing machine, which removes the glume from rice to make brown rice. You can take off the rice husk, increase the explosion and skin damage of the rice waist, and try to keep the original brown rice. It mainly consists of a hopper feeding device, a machine head device, a chaff separation chamber, a gear box and a frame.

Rice can be processed into rice at one time, and the separation of rice, bran and broken rice can be completed at the same time. The crushing part can be used for crushing rice, paddy, sorghum, beans, potatoes, straws and pulping. The water content and impurity content of processed products will directly affect the quality of rice and the work, efficiency and load of the machine. If it is used for other purposes, it will be contrary to the expected use of the machine.

Extended data

1. Wiring requirements: This machine can't be connected with the original lighting circuit * * *, and it must be directly connected with copper wire or aluminum wire of more than 4 square millimeters from the main power switch. Plug-ins are not allowed. It is recommended to use a knife switch above 10A.

2. Operation method: Before starting the machine, carefully check whether the fasteners in all parts of the machine are loose, and open the machine cover to check whether the gap between rice rollers is correct. Generally, the clearance between the rice knife and the rice roll rib tip is about 3 mm at the beginning of rib grinding, and about 2.5 mm at the end of rib grinding.

3. Turn on the switch and stand by and idle for 1-3 minutes. If it runs normally, it can be fed for processing. When opening the feed insert plate, pull it out slowly, so that the load of the machine will gradually increase, otherwise it will suddenly increase, which may cause the machine to jam and suffocate.

4, midway stop, should first close the inlet, let the rice mill run out of the valley and then stop.