What are the precautions for the installation of air duct machine?

As the weather gets hotter and hotter, our air conditioner has been greatly used. It may be a little early for some families or companies, but large shopping malls are already fighting. Because there are many people there, the heat is needless to say. At present, there are many types of air conditioners, and the places that need attention during installation are different. Today, Bian Xiao will talk about matters needing attention in installing air duct machines in air conditioners, hoping to help everyone.

We say that installing air conditioners generally requires professionals. This is because they know some problems of newly installed air conditioners and matters needing attention when installing them. From experience, we ordinary people don't have this ability. We may have heard such a slogan, that is, three products and seven packages. Although we say that the ventilator is very good, if it is not installed correctly, we will not enjoy the effect. Now I will introduce some problems that need to be paid attention to during the installation.

Ducted air conditioning

According to the classification of air duct machines, there are some skills in installation. We say that the static pressure of air conditioner is the index of air supply, and the greater the static pressure, the longer the air supply distance. Ducted air conditioners need to supply air through air ducts, so the wind pressure loss will increase during the air supply process. If the connected air duct is too long and the wind pressure is not calculated in detail, there may be no wind in the end. According to the static pressure, the air duct machine can be divided into low static pressure, medium static pressure and high static pressure. The low static pressure is 0- 10PA, which can be connected to 1-2M air duct; The static pressure of medium is 30PA, which can be connected with 5-6M air duct; The high static pressure is 50PA, and some commercial large-scale wind turbines may reach above 100-200PA.

Ducted air conditioning

The thickness of the fuselage should be considered when installing the air conditioner of the air duct machine. Generally, it is the thinnest 185mm, and the ceiling thickness is 250 mm In addition, we also need to consider the length of connecting pipes for indoor and outdoor units of air conditioners. At present, it is very common to design air duct machines one by one, and the connecting pipes vary with the cooling capacity, and the longest can reach 70 meters. The installation of the air duct machine should fully consider the layout of the air outlet or the corresponding static pressure loss.

Ducted air conditioning

Generally, when installing, we will think that the household air duct machine is mainly thin, and it can be installed after the wall renovation is completed. The reason is because pay-off should be considered during installation. In addition, when installing, carpenters should also carry out some specific work such as ceiling and reserved tuyere according to the position of air conditioner. So when we install the air duct machine, we must do it before the ceiling decoration. Before installation, you should also make adequate circuit preparation, because the plug connection of the air duct machine is special.

When the floor is not high, we can use the local ceiling to hide the indoor unit. On the contrary, if the story height is different or the building frame is unique, we can make corresponding adjustments according to the actual situation.

Ducted air conditioning

This paper reflects the situation that should be paid attention to when installing air conditioning in air duct machine. I hope everyone can have a good reference. In addition, this paper also briefly discusses the operation method of the device. I hope I can give you some tips when you need to install it.