How to fix the PVC slot of open wire?

1, brick wall, thin concrete wall and precast slab roof can be fixed by pneumatic steel nail gun, which should be faster;

2. It is best to drill holes in concrete with electric hammer and fix them with expansion plugs. Fix it with glass glue, calculate the layout of the trough, and then apply some glass glue on the back of the trough. You don't need to paste them all, just stick them on the wall every 20 cm, and then press them on the wall. After 24 hours, the glass glue will completely dry and the wires will be laid.

After the location of the trunking is determined, you can punch several holes in the wall at equal distance with an impact drill, then put down the plug and fix the trunking with screws. After it is fixed, the wires can be laid directly.

Extended data:

Common trunking types include insulated trunking, push-out trunking, mini trunking, separated trunking, indoor decorative trunking, comprehensive insulated trunking, telephone trunking, Japanese telephone trunking, open wire trunking, circular trunking, partition trunking for exhibition, circular floor trunking, soft circular floor trunking and cover trunking).

International relay certification: UL American Electrical Certification? CSA Canadian standard CErtification ce meets European low-voltage equipment certification? DVE？ German electrical and electronic information inspection certification? ROHS？ International environmental protection certification.

1) The trunking shall be smooth without distortion, with no burr on the inner wall, tight and straight joints and complete accessories.

2) The joint of trunking shall be smooth, the joints shall be tight and straight, the cover of trunking shall be smooth without warping, and the outlet position shall be correct.

3) When the trunking passes through the deformation joint, the trunking itself should be disconnected, and the trunking should be connected by a connecting plate and not fixed. Protective grounding wire should have compensation margin. For trunking below CT300* 100, 1 bolts shall be fixed to the transverse Daniel, and for trunking above CT400* 100, 2 bolts shall be fixed.