I just learned to install the system today! But I don't know what system is comfortable.

I have my own computer, so I can't install my own system. Every time the system breaks down, I have to pay someone else to get it! Hurry up and study, the computer has been used for so long that people who can't do it will laugh! ! hahaha. . . Let's start the introduction! !

There are usually four ways to install a computer system:

1. Fool loading system:

You can install Win7 or WinXP, and the main operations are as follows:

Things to prepare:

The existing computer operating system (for example, your computer system can still be used, but it is not very powerful! You want to reinstall the system, or change the system and so on. );

A system for downloading image files in GHO format on the Internet; (Baidu searches a lot! Remember what kind of system you download, and what kind of system you can install, such as WinXP, Win7, or 64-bit system);

Another most important tool is Ghost backup and restore tool, which is an application in EXE format. (Baidu searches for "Ghost Backup and Restore Tool", if available) The specific figure is as follows.

All right! To prepare for the work, let's start to install the system. Step 1: Open the Ghost backup and recovery tool. The interface is as follows:

Look at this! The first line selects the recovery system, and the second line selects the system in GHO format that you downloaded.

It is hereby declared that if you find that after selecting the selected GHO file, and then selecting the following disk C, you will find that the "OK" button at the bottom is still gray and cannot be clicked; This means that the system you downloaded is the wrong system in the wrong GHO format. I suggest you download the system in GHO format again. Of course, the XP system above is fake, and I modified it with a compressed package!

If you can use the confirm button after selecting disk C, just click the confirm button and a dialog box will pop up; Do you really want to restart the restore system? If you click Yes, it will automatically restart and reinstall the system for you. Well, you don't have to move the computer when you restart, you can still play. This is a fully automatic installation system. The system will be installed in a few minutes! This is the simplest fool loading system! The disadvantage of installing the system like this is that the system you installed has been tampered with by others! It's not a completely pure version, but the original system of Microsoft. This system will bring some software you don't like, or software you don't need at all! Advantages except that the system itself can install some drivers, I will not say anything else, you know!

2. Removable disk (USB device)

Things to prepare:

Movable disks that can be used (U disk, TF card, SD card, MP3, etc. , at least 512mb); Memory);

Windows PE(ISO image file, which can be searched and downloaded on the Internet. The file size is about 100MB~300MB, which is too big to use and slow to start);

WindowsXP or Windows7 (this is the system you want to install on the computer, and it is best to have an image file in ISO format. WinXP is about 600MB, 32-bit win 7 2.5 GB and 64-bit win XP 3.2 GB.

Next is the preparation:

Use UltraISO to burn WindowsPE image files to removable disks. I choose the latest Win7PE here, which is compatible with the latest computers. (The main reason is that the hard disks of many computers are SATA interfaces now, and the old version of PE can't find a local disk on the computer after it is started, so it is impossible to install the operating system. Next step: first install UltraISO on your computer, and then use it to open the PE you downloaded.

Then, find the startup item in the menu bar and click "Write hard disk image".

Find the U disk you want to burn, and the best way to burn it is USB-HDD+, which is more compatible and can better adapt to different computers!

Be sure to back up the data of the U disk before burning, because burning will format the U disk! Do remember! )

Also, if you find that the contents of the U disk are messy after burning, please note that the files in the U disk (non-artificially copied files) cannot be deleted after burning! Otherwise, PE will fail and cannot be used. To solve this problem, it is very simple! There is a "create boot partition" in the picture (this function is only available for floppy drive version 9.5 or above! ), hook it and you're done. When you hang it and burn it, you will find that your USB flash drive is empty! Don't be surprised, that method just creates a boot partition for your USB flash drive. If you want to see it, it's simple. Right-click the computer on the desktop to manage, and open the window to look left. Click Disk Management to find your USB flash drive and see if it is split in two now. Don't worry, the flash drive won't break.

All of the above are preparations! After burning, put the system you want to install into this burned USB flash drive. Of course, if you make a system for your own computer, it may not be necessary. Just make sure that the WindowsXP or Windows7 system you want to install is installed on your computer. If you have a system on your computer, it is not recommended that you copy it to the U disk, because the transmission rate of the U disk will never catch up with the local hard disk, and it is not as fast as the local hard disk! Next, I will introduce different ways to install my favorite system.

& lt 1. The first step is to start your machine with WinPE (including the machine with broken system). If the machine hardware is broken, there is nothing I can do. Come on! Continue learning):

Insert the USB flash drive into the USB interface of the computer, and then restart the computer. Remember to look at the lower left corner of the boots above the fold. He will prompt you which button to press to enter the BIos. Press the button it prompts as soon as you see it. If you miss the opportunity, try this operation again. After entering the BIos, the whole interface is in English (of course, some computer BIos can be changed into Chinese through language setting, such as HP's computer). If your English is not good, I suggest you prepare a dictionary.

Of course, this is the BIos of the desktop computer (the notebook is a little easier to write). You find the advanced BIos features and press Enter to enter the settings, as shown in the figure.

Check whether the first boot device is found; Press Enter to enter the settings;

Of course, you choose your USB flash drive as the first startup item, that is, enter and choose USB-(USB flash drive name) device. Again, different computer BIos is different!

Remember, your goal is to set your USB flash drive as the first startup item.

There are also those that do not indicate the first and second, as shown in the figure:

In fact, this means that whoever is at the top is the first startup item. Needless to say, the USB device is at the top, and the specific method is explained at the bottom of the screen. Generally, either F5 and F6 move up and down, or-and+move up and down! Move to the top, and then F 10 saves and exits the BIos settings, and then it will automatically restart. Don't touch the computer when restarting. If you find that USB devices appear in the upper left corner of the screen. . . Congratulations, you successfully started from the USB flash drive! If there is a fault or error, it means that the system in your USB flash drive is not engraved! Or there is something wrong with your motherboard settings. The former re-engraves the disk, and the latter Baidu motherboard does not support U disk startup, so you can start the system!

& lt2.Win7 original (installation version) installation:

Find the ISO image file you prepared, double-click it and load it into the virtual CD-ROM, as shown in the figure, and click OK.

In this way, the ISO image file will be loaded into the virtual optical drive (if you don't know what a virtual optical drive is, you can go to Baidu), and then you can find the ISO image file you loaded in the computer, as shown in the figure; The image file is selected, and we need the system file to install the system.

Next, I'll teach you a quick way to install Win7. First, open a tool named "NT6.x quick installation tool" in the start menu, and use it to install Win7 in just a few minutes!

This is its operating interface.

It needs the install.wim file in the image file, which is in the source file of the CD image. First, click "Open" to find this file.

Find the CD file that you just put into the virtual drive and find the specified folder.

Select the install.wim file, click Open, and you will see the information as shown in the figure:

Of course, we will definitely install the best Win7 Ultimate Edition! ! Select Win7 Ultimate, and then look at the options below. Remember that it is best to install it on the C drive. If it is formatted, it doesn't matter! The disk you want to install will be emptied. Pay attention to backup data! You don't have to choose the following. Click "Start Installation" to install.

Confirm the information and click Yes to start the installation.

When it expands the WIM image file, a restart prompt will pop up.

Click Yes to restart and continue the installation. Congratulations, your system is basically ready. Restarting is just installing equipment and setting up the computer. So far, you have learned to quickly install Win7 systems, including X86 and X64. Installing original X64 is the best and fastest way! X86 is also very suitable, mainly X64 method! !

& lt3.Ghost recovery system

This is the consistent usage of some engineers who sell computer installation. The method is simple. You can refer to the fool installation system, the principle is the same! It is only used because the machine system is damaged and cannot be started normally! Please refer to the fool installation system for specific usage! Different PE systems are different, so I won't introduce them! This method is mainly used to install WinXP, and of course Win7 can also be installed. As long as you download an available system in GHO format, it can be installed on X86 and X64, or on WinXP and Win7!

Let's compare the advantages and disadvantages of these two methods:

Advantages of the first installation method: it is best to install Win7, and the installed system is relatively pure! It is more reassuring to use!

Disadvantages of the first installation method: not all drivers are integrated, so drivers need to be installed (if it is a notebook, it is very convenient to install drivers on the CD of the notebook).

Advantages of Ghost: faster installation! And now most GHO systems are integrated with mainstream drivers and commonly used software, such as Office, QQ, Thunder, sogou and other installed systems.

Disadvantages of Ghost: There will be some things you don't like, such as Chinese cabbage and constellations in OEM, which are annoying to watch, and such a system is made by others and cannot guarantee stability. Don't worry! I don't usually install Ghost system, so I'm worried about its stability. )

3.CD/CD ROM (CDROM/USB-CDROM)

This is the simplest. Buy a CD and buy whatever you want. There are instructions on it, so I won't say it. And carved his own system disk. This is to change the first boot to CDROM/USB-CDROM according to the above method, and just run and install it!

Disadvantages: "1. Want to have an optical drive (many desktops don't have an optical drive, and this thing is rarely used) ". Waste of money and trouble, slow installation "3. The stability of the system cannot be guaranteed.

Advantages: 1 If all the above methods fail, you can try this method. 2. The installation success rate is relatively high.

4. Remove the hard disk of the computer and install the system on a working computer.

Let's not talk about the pros and cons of this. If all else fails, you can only use the following methods!

The last resort is to buy a new computer! None of the above! The hardware must be broken! Change it. . .