Common faults of bear electric hot pot when it is electrified and does not work

Xiao Xiong is the home appliance brand that many consumers will choose. Xiao Xiong electric chafing dish is loved by many consumers. Xiao Xiong electric chafing dish will not work when it is in use. So why doesn't Xiao Xiong electric hot pot work as soon as it is turned on? What are the common problems of bear electric hot pot? Today, Bian Xiao will answer your questions one by one.

First, the bear electric hot pot does not work when it is electrified.

1, the electric hot pot of Xiaoxiong doesn't work, which may be due to the temperature control failure of the electric hot pot. Ordinary electric chafing dish is mainly composed of a heating plate, a temperature limiter, an insulator, a fuse power connector, an insulation indicator lamp and a resistor, a cooking indicator lamp and a resistor. Damage to the temperature limiter or insulator will cause the electric chafing dish to be electrified and not work. In particular, the contacts in the temperature limiter are vulnerable parts. If you have the ability, you can open the three screws at the bottom of the electric hot pot to see if its contacts are black or burnt. If the capacity is insufficient and the replacement is difficult, it can be sent to the after-sales warranty or professional maintenance organization for maintenance.

2. The failure of the electric chafing dish may be caused by three reasons: disconnection of power cord, poor contact of plug or socket, and broken heating wire. You can find out where the power cord is disconnected, wrap it with insulating tape, and replace it with a new wire of the same specification if necessary; Replace the socket to eliminate poor contact; Replace the new heating wire for troubleshooting.

Second, the common faults of bear electric hot pot

1, leakage of Xiong Dian chafing dish

The leakage of electric chafing dish may be caused by insulation damage, such as conductor sheath damage or collision between electric heating wire and shell. Damaged insulation can be repaired, wrapped with insulating tape, or replaced with new products; Carefully take out the electric heating wire holder, and press the electric heating wire outside the groove into the groove to prevent the electric heating wire from coming out of the groove again for troubleshooting.

2. The bear electric hot pot burned out the heating element.

There are four reasons why the electric chafing dish burns out the electric heating elements: the wires of the power cord collide at the plugs at both ends, there are conductive foreign objects at the electric heating socket, the wiring in the base is short-circuited, or there is water in the plug, socket and base. You can separate threads by finding out where the threads conflict; Remove foreign objects from the electric socket; Open the base to find the short circuit point; Wipe off water and dirt with a dry cloth for troubleshooting.

When using electric hot pot, if it doesn't work, you can remove obstacles yourself. If it cannot be solved, it is recommended to contact a professional for maintenance or contact a merchant for replacement.