Install door covers and window covers for decoration and literacy

The significance of installing door and window covers:

Door cover and window cover are architectural decoration terms, which refer to the inner and outer frames of doors and windows. It's also called door frame and window frame directly. The original function of the door and window cover is to fix the doors and windows and protect the corner.

But now this kind of problem no longer exists, has lost the actual functional requirements, and has become a pure personal aesthetic. The installation of door and window covers is a very important link in veneer carpentry. The quality of installation directly affects the beauty of home decoration and the installation of doors and windows. Construction technology of installing door and window cover

1. Emphasize

Generally, the width of the door cover is 80-90 mm, the width of the fixed keel is 40mm from the wall and 40 mm * * 80-90mm from the thickness of the door frame. In the actual marking operation, that is, when the corner of the doorway is 40mm outward and the thickness of the 40mm doorframe is 80mm, the height of the doorway should be used first.

2. Fix the wooden keel and bottom plate

When fixing the wooden keel, you can decide whether to use the wooden keel according to the hardness of the cement layer on the corner surface. If the cement layer is hard, it is easy to destroy the cement layer at the external corner when fixing the wooden keel with steel nails. At this time, all the wooden compression plates with the thickness of 15mm can be used to replace the wooden keel.

3. Install the guard plate

First, use plywood to cut the material according to the specifications of the door cover. The specifications of the door cover are generally 80mm on both sides of the door and the upper part of the door head, and the width of the inner side of the door is generally 250mm between the trimming of the door frame and the edge of the bottom plate of the brake cover). The length of the cutting protection panel is 2008 mm.

Transverse door cover 960mm；; The vertical guard plate at the entrance is 2000mm, and the horizontal guard plate is 1000mm. 4. Mosaic wooden decorative lines

Commonly used wooden decorative lines for decorating family door covers mainly include fish belly (smaller than semicircle) and flower-shaped lines, and the width specifications of fish belly wooden lines are 3mm, 10mm, 12mm, 15mm, etc. Mainly used for decoration of door covers, window covers or lattices embedded behind door leaf covers.

Window cover

Construction method of curtain.

The difference between window cover construction and gate cover construction is that the door cover only covers three sides, while the window cover must cover four sides, and its construction materials and operation methods are the same as those of the door cover. Matters needing attention in installing door and window covers

1. When installing the plywood guard, whether it is the door leaf, the door cover or the window cover, pay attention to the fact that the front of the plywood faces outward, not the back, which will make a joke.

2. For every corner of the door cover and window cover, whether it is a fender or a decorative wood line, you should first draw a 45-degree oblique straight line with a square, cut the slope straight according to the line, and then try to install it. After confirming that the corner line is straight and tight, formally fix it to ensure that the 45-degree angle is neat and tight.

3. If there are burrs and other defects on the cutting surface of the door frame and on both sides of the door leaf after drying, fine wood sandpaper or fine emery cloth should be used to gently polish along the edge, and a chisel or cymbal is not needed for trimming, so as not to damage other parts.

4. When the surface of the door leaf requires a grid pattern, it should be completed before the door leaf installation. When the door leaf is inlaid, it should be tiled first, and then the shape of the square pattern is drawn with a pencil according to the design pattern, and then the wood line is inlaid, and then the door leaf is installed.

5. For each door leaf after decoration, especially the door leaf of the living room against the wall, a door suction device should be installed in the corner with 80- 100 mm Takaso. In case the corner of the door leaf hits the wall, breaks the white wall or damages the door edge when slamming the door.

6. For the decoration of the kitchen door cover, if the door frame is connected in parallel with the same wall window frame (mostly wooden windows), the door cover and window cover should be decorated at the same time according to the height of the door frame and window frame, not just the door cover, otherwise it will affect the decorative purpose of indoor decoration.

7. If the micro-wood is stuck on the cutting surfaces on both sides of the door frame and the door leaf, and the surface of the micro-wood produces bean-like protrusions, you can punch 2-3 pinholes in the bubbles with a needle or a small thin nail, and then flatten and compact the bubbles with your index finger.

8. After the door leaf cladding is installed, the door lock shall be installed by drilling or cutting holes on the tower cable 2m outside the door leaf.

9. In addition, I would like to remind you that after the wood decorative line is set, the cutting surface of the door frame should be glued firmly and smoothly with meager wood of the same material and color pattern, and then the door leaf should be installed. After the door leaf is installed, glue the two sides of the door leaf firmly and evenly with small wooden strips of the same color. When the surface of the door leaf requires a checkered pattern, it can be inlaid with wood line such as fish maw and ring according to the pattern requirements. Common grid patterns include squares, rectangles, rings and diamonds. However, it should be noted that the decoration specifications of the above door covers mainly refer to doorways without bright windows in the floor suites. For doorways with bright windows, the bright windows can be decorated in a fan-shaped or semi-circular shape to enhance the decorative effect. For the decoration of kitchen and bathroom doors, in order to save materials and reduce the cost of decoration, one-sided decoration can also be carried out, that is, the front can not be decorated. However, for the entrance of each suite, due to the wide door leaves and the installation of security doors, appropriate methods can be adopted for decoration according to the actual lazy situation on the spot.

What should we pay attention to in this step?

What the owner has to do is mainly to measure the dimensions of all doors and windows, consider the relevant treatment methods and calculate the construction area of various treatment methods. For the current mainstream new houses with three bedrooms, two bathrooms, one kitchen and two east and west balconies, there are about 6-8 windows that can be treated in the form of aluminum alloy, namely, three bedrooms 1, kitchen 1, two bathrooms 1 and two balconies 1, among which balcony windows can be used. In addition, indoor kitchen partitions, living room partitions, kitchen partitions and other indoor partitions, as well as kitchen portals, the current mainstream decoration opinions are also aluminum alloy closure. These are the first things that owners need to understand and master.

4. When the surface of the door leaf requires a grid pattern, it should be completed before the door leaf installation. When the door leaf is inlaid, it should be tiled first, and then the shape of the square pattern is drawn with a pencil according to the design pattern, and then the wood line is inlaid, and then the door leaf is installed.

5. For each door leaf after decoration, especially the door leaf of the living room against the wall, a door suction device should be installed in the corner with 80- 100 mm Takaso. In case the corner of the door leaf hits the wall, breaks the white wall or damages the door edge when slamming the door.

6. For the decoration of the kitchen door cover, if the door frame is connected in parallel with the same wall window frame (mostly wooden windows), the door cover and window cover should be decorated at the same time according to the height of the door frame and window frame, not just the door cover, otherwise it will affect the decorative purpose of indoor decoration.

7. If the micro-wood is stuck on the cutting surfaces on both sides of the door frame and the door leaf, and the surface of the micro-wood produces bean-like protrusions, you can punch 2-3 pinholes in the bubbles with a needle or a small thin nail, and then flatten and compact the bubbles with your index finger.

8. After the door leaf cladding is installed, the door lock shall be installed by drilling or cutting holes on the tower cable 2m outside the door leaf.

9. In addition, I would like to remind you that after the wood decorative line is set, the cutting surface of the door frame should be glued firmly and smoothly with meager wood of the same material and color pattern, and then the door leaf should be installed. After the door leaf is installed, glue the two sides of the door leaf firmly and evenly with small wooden strips of the same color. When the surface of the door leaf requires a checkered pattern, it can be inlaid with wood line such as fish maw and ring according to the pattern requirements. Common grid patterns include squares, rectangles, rings and diamonds. However, it should be noted that the decoration specifications of the above door covers mainly refer to doorways without bright windows in the floor suites. For doorways with open windows, the open windows can be decorated in a fan or semicircle to enhance the decorative effect. For the decoration of kitchen and bathroom doors, in order to save materials and reduce the cost of decoration, one-sided decoration can also be carried out, that is, the front can not be decorated. However, for the entrance of each suite, due to the wide door leaves and the installation of security doors, appropriate methods can be adopted for decoration according to the actual lazy situation on the spot.

What should we pay attention to in this step?

What the owner has to do is mainly to measure the dimensions of all doors and windows, consider the relevant treatment methods and calculate the construction area of various treatment methods. For the current mainstream new houses with three bedrooms, two bathrooms, one kitchen and two east and west balconies, there are about 6-8 windows that can be treated in the form of aluminum alloy, namely, three bedrooms 1, kitchen 1, two bathrooms 1 and two balconies 1, among which balcony windows can be used. In addition, indoor kitchen partitions, living room partitions, kitchen partitions and other indoor partitions, as well as kitchen portals, the current mainstream decoration opinions are also aluminum alloy closure. These are the first things that owners need to understand and master.