Huawei lanswitch allocates ip.

1. Automatically set the IP address and use the DHCP server function. DHCP is a special function of the router. Using DHCP function can avoid errors caused by manually setting IP address and subnet mask.

2. Click the control panel in the start button, open the network connection in the control panel window, right-click the local area connection, select the properties option, double-click the Internet protocol (TCP/IP) in the properties dialog box, click to automatically obtain the IP address, and then click OK.

3. Click the DHCP server option on the left side of the router management interface, and click the Enable button in the DHCP setting window that pops up. "Address Pool Start Address" and "Address Pool End Address" options The fourth segment of the IP address is the part that users can input at will. We can enter 100 and 200 respectively (note that the starting address must be less than the ending address, and the starting address cannot be 0, 1, and the ending address cannot be 255).

4. Click the "Save" button after setting. Turn off the computer and router, turn it on again after disconnecting the power supply, and turn on the computer again.