Learning experience of mechanical fitter

When I first came, those scenes were still fresh in my mind, but in a blink of an eye, a month passed like this, and I couldn't help feeling a little sorry. After all, it was a month, so it passed. I can't say that I didn't learn anything at all, but at least a lot of time passed quietly between my fingers. When I really wanted to catch it, I found that the situation was far beyond your control. Time is gone forever. Confucius said: The deceased is like this. Looking back, there are still some things worth remembering. One of the things that really surprised me was that when you gave us a lecture, I just came to the factory and saw such old equipment, and I was really a little uneasy. So I thought you were giving us a lecture with the same contempt for the factory, and I listened to your lecture with a feeling of disrespect and contempt. But after listening to several teachers, I found that I was going to change my mind. After listening to your lecture, I am more sure that my idea is wrong. Later, I found that many teachers are so humorous and their lectures are so vivid! Although I didn't want to come to the internship at first, because I felt useless, after a month, I felt confident enough after exploring the world. At this time, I feel a bit like a modern college student, my practical ability has been improved, and my spirit has been slightly sublimated in this internship. I really don't know how to describe the joy after seeing the success of my work. I saw a square blank bit by bit with a hacksaw, and now I use a hammer to grind the corners bit by bit. This process is arduous, which we have never experienced in our young life for more than 20 years, but the more difficult it is, the more it inspires our enthusiasm. Seeing so many students who are not afraid of being dirty and tired in order to finish better, they completely forget themselves. After seeing several students fighting for the accuracy of a workpiece; After seeing the teacher explaining a question to a classmate, all the other students rushed to the front, craning their necks and listening with interest: seeing the teacher surrounded in the middle after class and the students kept asking questions, I finally found out that they were so cute and everything was so beautiful. Internship, the first time in my life, I think I will always remember the good feeling it brought me and everything it taught me!

Today, almost a month's internship will be over. During this period, I learned a lot. I thought it was easy to make a lathe. Just fiddle with the machine. I didn't expect it to be easy to do it well. Sometimes it takes a long time to process a small part, and it may not be very accurate. It seems that the teachers are right. The older you get, the better you learn this kind of thing.

Tomorrow is the last day of internship. Now we have learned many things, such as lathes, planers, milling machines, casting, numerical control, locksmiths, etc. These things will certainly be beneficial to our future work or life. Now I really want to go to work and try what we have learned, but unfortunately it is not enough. Although I have learned something, it seems only a little, and there are still many things to learn!

Although this internship is almost over, I always feel that it is not very cool. Maybe I just didn't satisfy my curiosity. There is a lot of knowledge that is not true at all, like CNC machine tools. I've never seen it, but it's just a simulation. And casting, just making sand, not casting.

Generally speaking, this internship is ok, and now I am looking forward to the next internship more and more. I hope there are no regrets in the next internship! !

After a month's metalworking practice, I really benefited a lot. Learning machines from textbooks is far worse than actually operating them. Only in this way can I really understand the knowledge in those textbooks and become interested in mechanical manufacturing. Through practice, I got to know some machines, their basic operation, the structure and transmission mode of the machines, which will be a beneficial enlightenment education for my future development in machinery manufacturing.

Practice speaking

Unconsciously, a month has passed, and I feel that this month is very empty and full. Emptiness is because life is monotonous. Enriched, because I learned a lot this month. I remember when I first learned CNC, my mind was blank about machinery. I don't understand any of this. Internship is a process of experience. I am now experiencing the harvest after labor every day, which is the sweat and tears of happiness. The daily fatigue makes me feel full. Although it is coming to an end now, I will never forget this experience in my heart.

I also understand that all this is inseparable from your teaching, which makes me no stranger to machine tools. I seem to broaden my horizons at once. These may not be enough, but at least I feel very benefited because I have experience. "Tired lathe worker, tired fitter" is nothing, just a matter of habit. But forming this habit is a test. Maybe I failed this point. But I'm still happy.

The day after tomorrow is a written test, and I must pass it, for myself and to live up to the teacher's hard work. I also wish the whole class can pass. Thank you again for your hard work.

After more than a month's internship, I learned something that I didn't learn in school for decades. It is not a simple book knowledge, but a combination of theory and practice. I study in practice and practice in learning, so I think it is the most meaningful learning.

In the practice of turning, milling, planing, welding and numerical control, we have learned some machine tools for machining and the basic knowledge of workpiece casting and rough and finish machining, which has a sensory basis for our future study. I think the future study will definitely not be so abstract, and it will definitely be easier, which will lay a certain foundation for our future work. So this internship gave us a very deep impression.

It may be more meaningful if the teacher can connect the content of the internship with our future study and work more closely.

Practice speaking

Flowing clouds and flowing water, I suddenly remembered the scene of yesterday's internship, which is really heartfelt.

Practice is the practice of theory. The reason for doing this is nothing more than to exercise our labor ability and lay the foundation for us to enter the society. I have a deep understanding of this.

In a short month, we saw equipment we had never seen before and did things we had never done before. Broaden your horizons and increase your knowledge. At work, we have laughter, tears, sweat and gains. We gradually understand the hard-won fruits of labor and the hard work of our parents.

"Dead-tired assembler, dead-tired lathe worker" makes us have no respect for those workers who are struggling in their jobs.

The internship is over, and we have achieved the purpose of the internship and gained something. But all this is inseparable from the earnest instruction and patient guidance of the internship teachers, who let us taste the joy of harvesting labor. But is it really over? I don't think so. The internship is still far away, isn't it?

Practice speaking-

Flowing clouds and flowing water, I suddenly remembered the scene of yesterday's internship, which is really heartfelt. Practice is the practice of theory. The reason for doing this is nothing more than to exercise our labor ability and lay the foundation for us to enter the society. I have a deep understanding of this. In this short month, we saw the equipment we had never seen before, and did things we had never done before, which broadened our horizons and increased our knowledge. We have laughter and sweat at work. There are also gains. We gradually understood the hard-won fruits of labor and realized the enthusiasm of our parents.

Work hard. "Dead-tired fitter, dead-tired lathe worker" makes us feel awe of the workers struggling in their jobs.

After the internship is over, we have achieved the goal of internship and gained something, but all this can not be separated from the inculcation and patient guidance of the internship teachers, who let us taste the joy of harvesting labor. But is it really over? I don't think so. "Internship" is still a long way to go, isn't it?

Practice speaking

The first month of last semester was an unforgettable experience of hard military training. This semester is another month's internship. Although it is hard work, we have learned a lot and the importance of internship, including endless happiness, which we can't experience in class.

During this month, the teacher worked hard to teach us CNC, turning, milling and planing. During the break, the teacher will also tell us some local customs and jokes, which will make us realize that it is also a pleasure to communicate with the teacher. If possible, I hope this month is endless. Sincerely thank the teachers who have worked hard for us.

A month's internship will soon pass, and I still feel a little nostalgic in retrospect. I learned some extra-curricular knowledge in my internship and taught myself how to operate the machine tool. Although not very skilled, I still have some sense of accomplishment.

The biggest gain of internship is to learn to do it yourself and practice it yourself. It is not enough to rely solely on theoretical knowledge. It is most important to learn to integrate theory with practice. It is very important that theory and practice complement each other, and only during the internship can we have the opportunity to practice. Looking back now, it's a pity that I didn't grasp this opportunity at that time. This is a lesson. I told myself that I should seize every opportunity to study hard in the future.

Other feelings of internship can't be truly expressed in words, but you can only know what it is, which is the most experience and lesson on your future road.

Although the internship is short, I feel a lot about it.

I didn't like CNC very much because I arrived at school one day late, but after a day, a designed program actually worked normally and began to surprise the internship. After arriving at the internship factory, I learned about milling workers, foundry workers, fitters, grinders, welders and lathe workers. People are already excited and have learned a little knowledge. I have a little foundation for my future work, and I also see the teacher's meticulous, humorous, responsible and versatile. What impressed me most was the humor and philosophy replied by the grinder, and the teaching method of the grinder, which let us ponder and process by ourselves.

But what I want is more materials, and sometimes we can't do it at all. It would be great if we did it ourselves. Some teachers should speak louder. That would be great.