How to install a notebook system

Question 1: How to install a computer system? I have my own computer, and I can't install my own system. Every time the system breaks down, I have to pay someone else to do it! Hurry up and study, the computer has been used for so long that people who can't do it will laugh! ! hahaha. . . Let's start the introduction! !

There are usually four ways to install a computer system:

Methods/steps

1

1. Fool loading system:

You can install Win7 or WinXP, and the main operations are as follows:

Things to prepare:

The existing computer operating system (for example, your computer system can still be used, but it is not very powerful! You want to reinstall the system, or change the system and so on. );

A system for downloading image files in GHO format on the Internet; (Baidu searches a lot! Remember what kind of system you download, and what kind of system you can install, such as WinXP, Win7, or 64-bit system);

Another most important tool is Ghost backup and restore tool, which is an application in EXE format. (Baidu searches for "Ghost Backup and Restore Tool", if available) The specific figure is as follows.

2

All right! To prepare for the work, let's start to install the system. Step 1: Open the Ghost backup and recovery tool. The interface is as follows:

three

Look at this! The first line selects the recovery system, and the second line selects the system in GHO format that you downloaded.

It is hereby declared that if you find that after selecting the selected GHO file, and then selecting the following disk C, you will find that the "OK" button at the bottom is still gray and cannot be clicked; This means that the system you downloaded is the wrong system in the wrong GHO format. I suggest you download the system in GHO format again. Of course, the XP system above is fake, and I modified it with a compressed package!

If you can use the confirm button after selecting disk C, just click the confirm button and a dialog box will pop up; Do you really want to restart the restore system? If you click Yes, it will automatically restart and reinstall the system for you. Well, you don't have to move the computer when you restart, you can still play. This is a fully automatic installation system. The system will be installed in a few minutes! This is the simplest fool loading system! The disadvantage of installing the system like this is that the system you installed has been tampered with by others! It's not a completely pure version, but the original system of Microsoft. This system will bring some software you don't like, or software you don't need at all! Advantages except that the system itself can install some drivers, I will not say anything else, you know!

2. Removable disk (USB device)

Things to be prepared: removable disks (U disk, TF card, SD card, MP3, etc. , memory at least 512mb); Windows PE(ISO image file, which can be searched and downloaded on the Internet. The file size is about 100MB~300MB, which is too big to use and slow to start); WindowsXP or Windows7 (this is the system you want to install on the computer, and it is best to have an image file in ISO format. WinXP is about 600MB, 32-bit win 7 2.5 GB and 64-bit win XP 3.2 GB.

four

The next step is to prepare: burn the WindowsPE image file to the mobile disk with UltraISO. I choose the latest Win7PE here, which is compatible with the latest computers. (The main reason is that many computers' hard disks are SATA interfaces, and the old version of PE can't find a local disk on the computer after it is started, so it is impossible to install the operating system. Next step: first install UltraISO on your computer, and then use it to open the PE you downloaded.

five

Then, find the start in the menu bar, click Back, and write the hard disk image.

six

Find the U disk you want to burn, and the best way to burn it is USB-HDD+, which is more compatible and can better adapt to different computers!

Be sure to back up the data of the U disk before burning, because burning will format the U disk! Do remember! )

Also, if you find that the contents of the U disk are messy after burning, please note that the files in the U disk (non-artificially copied files) cannot be deleted after burning! Otherwise, PE will fail and cannot be used. To solve this problem, it is very simple! There is a "create boot partition" in the picture (this function is only available for floppy drive version 9.5 or above! ), hook it and you're done. When you hang it and burn it, you will find that your USB flash drive is empty! Don't be surprised, this method just creates a boot partition for your USB flash drive. If you want to see it, it's simple. Right-click the computer on the desktop to manage, and open the window to look left. > & gt

Question 2: How to reinstall the notebook computer system? If you have a CD, you need detailed steps. How to reinstall the laptop system?

(1) is basically the same as the desktop reloading system, and it is also necessary to boot into the BIOS setup CD or USB flash drive to boot the computer to install under WinPE, and use GHOST32.EXE to directly restore the GHOST version of the system image to the C drive. Alternatively, you need to download the installation version, extract it to the non-system partition with WinRAR, and then run the Setup installation. (However, this installation method does not allow the high version to install the low version. For example, installing XP system under Win7) Note that some laptops need to enter BIOS to change the hard disk mode from ACHI mode to compatible IDE mode before installing the system.

② It is recommended that you prepare a system CD first. Before installing the system, please make the following preparations: boot into the BIOS, set the hard disk interface to IDE or non-AHCI, then save and exit. If you are using GHOST's system CD, press F 12 according to the following prompts when booting, and set it to boot from CD. If the desktop prompts you to press any key, press enter, and then choose to install the system in the partition disk you need to install, and then it will be fully automatic (including automatic driver installation). If you use a pure system and operate step by step, you will boot from the CD-ROM drive at first, press any key when prompted, and then follow the prompts step by step, but you still need to install the corresponding driver to enter the installation. You can download and install drivers from Hardware official website. If you can't find it, download a driver wizard or driver life, and it will automatically help you find the corresponding driver in the networked state. (It is recommended to install WHQL certified drivers)

How to install an operating system on a CD?

Step 1, set the lights:

The so-called optical startup means that the computer reads the optical drive first when it is started, so that if there is a CD with optical startup function in the optical drive, it can be read before the hard disk is started (for example, when installing the system from the CD).

Setting method:

1. Start the computer and hold down the DEL key until the BIOS setup window (usually with blue background and yellow English words) appears.

2. Select and enter the second item, "BIOS Settings". Find the entry or group containing the BOOT text, and find three entries "first", "secend" and "third" arranged in sequence, representing the first boot, the second boot and the third boot respectively. Here we can set it to CD-ROM, hard disk and USB in turn. (If you don't see these three E's on this page, the option menu on the right side of the boot is usually "Settings", and you can see them by pressing Enter. You should select "the first one" and then press enter, and select CD-ROM in the submenu that comes out. Press enter again.

3. After selecting the startup mode, press F 10 to open the E-text dialog box, and press "Y" (which can be omitted) to enter, and the computer will automatically restart, which proves that the changed settings are effective.

Step 2, install XP system from CD.

Insert the XP installation CD before restarting. When you see the word CD at the bottom of the screen, press Enter. Only when the light is turned on can the computer start reading the hard disk, which means skipping the light and starting from the hard disk.

After the XP system disk is opened, an installation interface with a blue background will appear. At this point, the system will automatically analyze the computer information without any operation until the display screen turns black, and then a Chinese interface with a blue background will appear.

At this time, the first protocol of XP system appeared. Press F8 (indicating agreement with this agreement), and you can see the information list of all partitions of the hard disk with Chinese operation instructions. Select drive C and press D to delete the partition (remember to back up the useful files of drive C first). The location of drive C becomes "unpartitioned", and then press the c key to create a partition in the original location of drive C (that is, the "unpartitioned" location). There is no need to resize the partition. After that, the position of the original C disk becomes "new unused" and press enter to continue.

Next, there may be a page with the option of formatting partitions. It is recommended to select "Format partitions with FAT32 (fast)". Press enter to continue.

The system began to format drive C, which was very fast. After formatting, the hard disk and the previous WINDOWS operating system are analyzed, which is also very fast, followed by copying files, which takes about 8 to 13 minutes (depending on the machine configuration).

After copying the file (100%), the system will automatically restart. At this time, when you see again & gt

Question 3: How to install the system in a notebook with an optical drive? First, set the first startup sequence: turn on the power. When BIOS starts POST, press the key (or press the key all the time) to enter the CMOS setup program.

Use the down cursor keys to select the second advanced BIOS function, and then press Enter. Select the first boot device with the down cursor key (the second boot device is the second boot device and the third boot device is the third boot device), press Enter, select CD-ROM (floppy disk HDD hard disk) and press Enter. Press F 10 (Save &; Exit Settings Save and Exit). Before restarting, insert the XP installation CD, and when you see the word CD at the bottom of the screen, press Enter. Only when the light is turned on can the computer start reading the hard disk, which means skipping the light and starting from the hard disk.

After the XP system disk is opened, an installation interface with a blue background will appear. At this point, the system will automatically analyze the computer information without any operation until the display screen turns black, and then a Chinese interface with a blue background will appear.

At this time, the first protocol of XP system appeared. Press F8 (indicating agreement with this agreement), and you can see the information list of all partitions of the hard disk with Chinese operation instructions. Select drive C and press D to delete the partition (remember to back up the useful files of drive C first). The location of drive C becomes "unpartitioned", and then press the c key to create a partition in the original location of drive C (that is, the "unpartitioned" location). There is no need to resize the partition. After that, the position of the original C disk becomes "new unused" and press enter to continue.

Next, there may be a page with the option of formatting partitions. It is recommended to select "Format partitions with FAT32 (fast)". Press enter to continue.

The system began to format drive C, which was very fast. After formatting, the hard disk and the previous WINDOWS operating system are analyzed, which is also very fast, followed by copying files, which takes about 8 to 13 minutes (depending on the machine configuration).

After copying the file (100%), the system will automatically restart. When you see the CD-ROM again, you don't need to press any key to boot the system from the hard disk, because some installation files have been copied to the hard disk (note: you can't take out the CD at this time).

A color XP installation interface with a blue background appears, and the installation progress bar and remaining time are displayed on the left. The initial value is 39 minutes, which is also determined according to the configuration of the machine. Usually, the installation time of P4 and 2.4 machines is about 15 to 20 minutes.

At this point, until the installation is finished, the computer will automatically restart, and there is no need to do anything except enter the serial number and computer information (fill in at will) and press Enter for 2 or 3 times. The system will automatically complete the installation.

Next, install the main driver, sound card driver and graphics card driver.

After installing the system, remember to change the first boot device back to the HDD hard disk. Finally, I wrote so much that I hope to choose me as the answer.

Question 4: I want to reinstall the system on my computer. 1 How to install it? You can reinstall the system software with one click. You can download the mirror software, and then download the system package and use the mirror software to open the prompt operation step by step. It is simple to note that if you install a dual system, you must empty a blank disk. If you change the system, it is torture to cover drive C, almost as simple as installing software.

Question 5: How to reinstall the notebook system? Can I install it with 360? Next, you can copy a system image file and put it in your notebook.

If it is in ISO format, download a virtual cd and install it through virtual cd; If it is in. Chu HO format, just download a Ghostsetup and you can run it.

If you don't understand, leave your contact information and I'll tell you.

Question 6: How to install a computer system with a USB flash drive is divided into the following four steps:

1. Make a USB boot disk. Here I recommend a tool for making peach U disk, which can be found online.

2. The USB flash drive startup disk is ready, and a GHOST file is needed. You can download the ghost version of a system from the Internet at will, or copy the gho file of the system disk you backed up with GHOST to the USB flash drive that has been made.

3. Set the startup sequence of the computer to USB flash drive. Depending on the motherboard, the keys to enter the BIOS are different. Common ones are Delete, F 12, F2, Esc, etc. Enter the BIOS, find "Boot", change the startup item to "USB-HDD", then press "f10"-"Yes" to exit and save, and then restart the computer.

4. After starting the computer with a USB flash drive, run WinPE. The next operation is the same as that on a normal computer. You can back up important files, format disk C and disk partition, restore system backup with Ghost, and install operating system.

Question 7: How does the notebook reinstall the system with CD? Get ready for work! ~

1: First, make sure your CD is useful. This tutorial is installed with the CD.

First, make sure you have a CD in your hand. This CD is a step-by-step CD, not a ghost version.

3. Copy the serial number on the CD wrapping paper. If not, go to Baidu to find a serial number and search xp serial number directly. (at present, the non-genuine CD MS does not need a serial number, just in case, copy it down. )

4. Back up your data, that is, the data on the C disk of the computer. Generally, just copy the files in your document and the files on your desktop to other disks (referring to useful files, useless files don't need to be backed up).

Ok, the above preparations are completed. Let's get started. Start the computer first, change the first startup sequence of the computer to CD-ROM startup, and look at the picture.

Restart the computer. When it comes out of the screen, look at the lower left corner of the screen, and you will be prompted to press the Del key to enter the BIOS. At this time, all you have to do is press the Del key on the keyboard, enter the S setting and select the first startup item as the CD-ROM (advanced Bios enters and selects the first boot device to enter and select the CDROM), then insert the prepared depth XP disk, and select one key to install on the C disk and wait for the boot.

It is very simple and user-friendly. You don't need to set CDROM when reinstalling in the future. Just put the disk in and restart it.

Question 8: The newly bought notebook is bare metal. How to install the system? Hello, thank you for choosing HP products. You are advised to refer to the following information:

Dear HP users, hello! Thank you very much for choosing HP products. According to your description, I suggest you refer to the following information:

Because your question contains less information about related questions, we can't know the specific model of your computer, and we can't give a targeted reply according to your question. It is suggested that you can record the serial number of the machine and open the following website to contact the HP Gold Service Center for specific consultation: HP/ChatNote: You can refer to the following official documents for how to log in to the chat room: h20566.2.hp/...400359.

I hope the above reply can help you.

Question 9: How to install the computer system? There are many ways to install a computer system. In addition to the time-consuming and troublesome complete installation method that is rarely used now, clone installation is more commonly used. Its methods are divided into hard disk installation (suitable for skilled users of backed-up systems), U disk installation (suitable for basic users with certain computer operation ability) and CD installation (suitable for novice computer users with CD-ROM drive). You can choose one of the following actions.

1, hard disk installation:

(1) Press F 1 1 or F8 after starting or restarting to see if one-button GHOST or similar software is installed. If yes, select a key to restore and press enter to confirm;

(2) Enter the one-button restore operation interface, and then select "Restore" to confirm. If you have just made a one-click backup before, you can restore to the state at the time of backup.

In addition, if you can enter the current system or press F8 to enter the command line mode when booting up, you can search for the GHOST program and GHO system files in WINDOWS or DOS, and then manually run the GHOST program to load the system GHO files, or you can reinstall the system.

2.u disk installation: If there is no one-click restore, use the system U disk to reinstall the system. The operating steps for starting the U disk manufacturing and reassembly system are as follows:

(1) Start USB flash drive:

A go to a physical store and buy a brand of USB flash drive with a capacity of 4 or more than 8G. It only takes about 500MB to start the U disk production tool itself, and then copy it to WIN7 system, which takes about 3-4GB. After the production is completed, the remaining space can also be used to read and write personal data.

B, search and download tools such as peaches or Chinese cabbage to make a startup USB flash drive, and insert the USB flash drive into a computer to run this software to make a startup USB flash drive.

C, go to the system house or similar websites to download the GHO files of operating systems such as WIN7 (if you download the ISO files, you can extract the GHO files from them) or ISO files, and copy them to the USB flash drive or the USB flash drive folder designated by the startup tool (for example, the startup tool of Old Cat requires that the GHO files be placed in the GHO folder under the root directory of the USB flash drive and the ISO files be placed in the ISO folder).

You can also search and download ISO format system image files (including GHO system files or complete system installation files) on the Internet, and release them to a USB flash drive through tools such as ultraiso to make a startup USB flash drive containing the system.

(2) Set the USB flash drive to start:

A, after the boot, when the motherboard self-test screen or brand LOGO screen appears, press the BIOS hotkey quickly and continuously (different brands of computers have different BIOS hotkeys, generally F2 for notebooks and DEL for desktops) to enter the BIOS setting interface.

B, press the left and right arrow keys to move, and press enter to enter the BOOT (or startups) tab. Press the up and down arrow keys to select the startup option, and press the+or-key to move the startup option, so as to set the USB flash drive (USB-HDD, USB-FDD and other formats, preferably USB-HDD) as the first startup item, and press enter to confirm (note: some computers need to insert the USB flash drive for identification before setting). Some old motherboards need to enter the advanced BIOS feature tab, enter it at "1st boot device", and then select USB-HDD.

Some new motherboards support EFI. After booting, press F 12 or F 1 1 to enter the startup options menu. You can directly select a USB flash drive (the model of USB flash drive can be inserted and identified in advance), a universal flash drive or a removable device to start the computer without entering the BIOS interface.

C press F 10 to save and exit the BIOS, and the computer will automatically restart. If you successfully boot from the USB flash drive, the USB flash drive function menu will be displayed.

(3)U disk reloading system:

After entering the function menu of the U disk, select "Install the system to the first partition of the hard disk" and press the prompt after entering, or after entering the PE system, run the "one-button installation system" on the desktop, and the computer will automatically run the GHOST software, automatically search for the GHO file clone on the U disk and install it in the C area. The whole process basically does not require human intervention until it finally enters the system desktop.

3. CD installation: the computer uses CD to reinstall the system, and the operation steps are as follows:

(1) Prepare the system CD: If there is nothing to buy in the computer shop, buy the latest CD of any system that needs to be installed. If you have a CD-ROM drive, you can also download the system files in ISO format and burn them to the system CD.

(2) Set CD startup: After startup, when the motherboard self-check screen or brand LOGO screen appears, it will soon ... >>

Question 10: How to reinstall the system for a notebook computer without an optical drive? Copy a system driver with a USB flash drive! Maybe go to the computer repair shop and install a CD-ROM drive!