Summary of equipment engineer's work

Six summaries of equipment engineers' work

Summary is a written material to review and analyze the performance of study, work and life in a certain period. Through it, we can correctly understand the advantages and disadvantages of previous study and work, so we should sum up and write a good summary. How is the summary generally written? The following are six short articles that I collected to summarize the work of equipment engineers. Welcome to read the collection.

Summary of Equipment Engineer's Work 6 Papers 1 Time flies, and the probation period will be one year in a blink of an eye. Looking back on my life in China Railway in the past year, I can't help feeling too much. I have completed the transformation from an inexperienced college student to an employee of China Railway, from unfamiliarity to familiarity with various businesses, and from consolidating academic theoretical knowledge to practical operation. I sincerely thank the leaders, masters and their colleagues for their training and selfless care, so that I can combine theory with practice from books and avoid detours.

20xx first arrived in Changliang on March 5th, when the climate was cold. As a person who has lived in the south since childhood, he has never felt the temperature of MINUS ten degrees, which is also a great challenge for me.

The outdoor climate is bad, especially for me who has never experienced the sandstorm in the northwest. At the same time, no matter the technology, the number of personnel and the conditions are not ideal, we all overcame the difficulties to assemble the new bridge erecting machine dj 168 and successfully debugged it. Everything is going on in an orderly way under the scientific command of Chang Liang's leaders; In a blink of an eye, on July 6th, 20xx, the probation period began. After making full preparations, the first bridge and firecrackers were successfully erected under the overall planning of leaders of various departments.

Although the first erection was hard, the joy of success made us forget all the fatigue; With the increasing familiarity with the bridge erection process and the continuous improvement of bridge erection methods, the efficiency of bridge erection is also constantly improving. Today, we have successfully built a 247-span bridge, which is our pride and our glory. Looking back on these days when I lived with everyone, I am proud to be a member of this team. I can show my value with wisdom and hard work and contribute everything to the company.

Summing up my past and life, I have greatly improved my professional level, political accomplishment and comprehensive ability, and I have many feelings and experiences. The summary is as follows:

First, take "being diligent and pragmatic, being brave in innovation" as the creed, strengthen study and improve one's own quality.

I attach importance to strengthening the study of theory and professional knowledge, and at the same time insist on studying and constantly improve my comprehensive quality. When you encounter problems you don't understand, take the initiative to discuss with your master and colleagues and learn with an open mind.

I deeply know that as a college student who has just left college, I still have a lot to learn, so I have never forgotten my identity. Seriously study business knowledge, focus on motor and electrification control management, find the key points in learning methods, grasp the key points, and combine their own shortcomings in circuit system construction and maintenance, conduct targeted learning, and constantly improve their business capabilities. Combine theoretical knowledge in books with hands-on operation. Therefore, while strengthening study, we should not only use our brains, but also start work. Only by combining the two can we have excellent performance and accurately judge and deal with the problems encountered.

In actual operation, in order to have a better operating vision and flexible operating space, I combined my own learning, with the guidance and leadership support of the master, carried out wireless control transformation on the hydraulic control of the No.3 column. Overcoming technical problems, the transformation experiment achieved staged success. The operator can control the hydraulic action anywhere within the wireless signal coverage without affecting the operation of the wired handle. But unfortunately, because there is no matching wireless control equipment that meets the operating conditions in the market, and the experimental products can not meet the requirements of bridging, the mobility and safety of the points need to be improved, so they have to be dismantled after the test is completed. But we can't deny the success of this experiment.

This kind of transformation and innovation is of great significance to my future, which makes me understand that innovation should be combined with reality, humanized and objective. At the same time, it also encourages me to carry forward this style and continue this innovative spirit in the future. Keep learning and making progress, and enrich your horizons. On the premise of ensuring safety and quality, we should be brave in innovation, improve efficiency, save manpower and material resources, and do our best in people-oriented thinking.

Second, the concept of "based on one's own duties and consolidating the foundation". Diligent and pragmatic, responsible for the development of the company.

Over the past year, I have always insisted on being strict with myself, working hard, always bearing in mind the purpose that the interests of the company are above everything else, and trying to do my job well in an ordinary and ordinary post. In the concrete maintenance of mechanical and electrical equipment of bridge erecting machine, the most easily damaged power supply cables and control cables should be monitored: before entering the beam, pay attention to the distance between the front and rear vehicles when the vehicle retreats between the No.2 column and the No.3 column, so as to prevent the cables from being squeezed due to too small distance. When entering the beam, it is most likely that the reinforcement of the side beam trips and pulls the drive cable. Therefore, we should pay attention to the driving situation of the vehicle and keep in touch with the operator of the general controller so as to stop the vehicle in time and deal with it in time under the above circumstances. When dropping the beam, pay attention to the fact that the handle line of the welding machine should not be pulled and pressed by the wheel during the lateral movement. Regularly check whether the wires are damaged and make necessary protection and replacement. Check the connection of wires to ensure that they are firmly connected, so as to prevent short circuit and open circuit from damaging the machine.

Check the keys, hydraulic operating handles and various control switches at any time to ensure their sensitivity and effectiveness. Replace the parts that have lost their performance patiently and carefully to prevent the circuit system from being damaged twice. At school, I try to serve well and be a good staff assistant; Carefully collect all kinds of information, fully and accurately understand and master the development of all aspects, analyze the main problems, sum up experience, and report to the leaders in time, so that the leaders can fully and accurately understand and master the recent actual situation and make scientific and correct decisions to solve problems. At the same time, as the operator of the No.3 column, he strictly implements the criteria in the Code for Erection of T-beams and is seriously responsible for the safety of the No.3 column in the process of bridging and transporting beams. Especially in the alignment of the through hole of the bridge erecting machine, the support pad of the No.3 column is particularly important, and it is necessary to ensure that the force is uniform and horizontal to prevent tilting. In order to increase the weight of the tail, when the No.3 column is put away and the boom is pushed, the sleepers and hard miscellaneous wood supporting the No.3 column are just fixed on the No.3 column, which reduces the burden on employees, saves the waste of manpower, saves the handling steps and increases the efficiency of crossing the bridge.

Three, to "safety first, ensure production" as the goal, do a good job and promote production.

Safety responsibility is no small matter. We have taken all necessary safety measures. As an electrician, I know my responsibilities.

1, responsible for the use of electrical equipment of the full bridge erecting machine.

2. Assist in beam erection during bridge erection, and be responsible for the use of electrical equipment by other operators.

3. Responsible for the installation and maintenance of electricity in living quarters and office areas. We should keep a high degree of vigilance at all times. In order to ensure the safety of electricity use, we should strictly abide by the relevant regulations and do not use electrical appliances illegally. In the laying and use of the line, we must treat it with a responsible attitude and not be careless. At the same time, in other operations of bridge crane, we should always pay attention to the safety of each post. Now safety is also a kind of productivity. Promote production and create more value on the premise of ensuring safety.

Looking back on the past year, I have made new progress in thought, study and research, but I also fully realize that my own shortcomings need to be improved and my theoretical knowledge level is still relatively low. Summing up the past is to learn from the past and do better in the future. Please criticize and correct the shortcomings and deficiencies in the book. Thank you again for your help and education. In the future, I will seriously overcome my own shortcomings, carry forward my achievements, consciously put myself under the supervision of leaders and colleagues, study hard and work hard to make my own contribution to the development of the company.

Summary of the work model of equipment engineer 6 2 Dear leader:

First of all, thank you very much for taking time out of your busy schedule to read my work summary. It is an honor to be a member of your company.

It's almost three months since I joined the company. In the past few months, with the help of leaders and colleagues, I have learned a lot about workflow. Later, through training, I learned about the corporate culture and various rules and regulations centered on "caring service, concentrating on work, being pragmatic and efficient, pioneering and enterprising".

First, serve with love and concentrate on things.

At work, I treat visiting guests politely, keep warm and help them patiently. When I can't answer their questions, I will ask the foreman and the old players for advice and give answers. At work, I always think that I represent the company, and when dealing with disciplinary issues, I always do' courtesy first'. I don't put on airs. I communicate with them patiently and have a heart-to-heart talk with them to avoid conflicts with them and affect the company's image.

Second, abide by the system, dare to grasp and manage.

During the construction of outlets and cinemas on the fourth floor, I managed the workers according to the track system and procedures, and strictly checked the people and goods entering and leaving every day to avoid suspicious people entering and the company's property being stolen; For those whose safety measures are not in place, such as:' Do not wear safety helmet when entering the construction area; Do not wear a seat belt when working at height; There are no fire control measures during hot work. I will carry out rectification and punishment according to the company's railway system and procedures, and put all safety measures in place to ensure zero accidents during construction.

Third, work hard and be tireless.

Completely obey and carry out the arrangement of the leader to the letter; Work with the mentality of sticking to the' last minute' and do your daily work as always; Often care about colleagues in life. I often talk to them and communicate with them. When they are unhappy, I will enlighten them and tell them jokes to make them happy. I always ask them about my work experience as a scholar.

I also have many shortcomings in my work, but I always demand myself by the standard of "qualified Jinyuan person", remind myself by taking my colleagues as an example, strive to be a qualified Jinyuan person, show myself on the big stage of Century Jinyuan, and contribute my strength to the glory of Century Jinyuan.

Summary of equipment engineer's work: 6 articles, 3 people, XXX, 20xx, entered the warranty center of Vanke Charm City on May 26th, and have been working for three months in a blink of an eye. During this period, with the care of leaders and the help of colleagues, I have learned a lot, which is of great benefit to my life development. In this regard, I would like to express my heartfelt thanks to all leaders and colleagues.

During the short and long probation period, I seriously studied the articles of association of the company, strictly performed my personal duties, reassured the leaders and satisfied the owners. Summarized as follows:

First, study hard and summarize and improve.

As soon as I entered the Charm Warranty Center, I was entrusted with a heavy responsibility as the on-site maintenance engineer in 10 and1.

Facing the 352 owners, when I first came into contact with the service industry, my business was unfamiliar, and I was inevitably worried about my work-I didn't know much about many places. On the one hand, I felt "interlaced like a mountain", on the other hand, I felt that I had a long way to go.

However, with the care of leaders and the help of colleagues, this kind of worry soon vanished. When encountering difficulties, everyone patiently teaches: whether it is to take the owner to inspect the house, check the problem points of the house inspection list for maintenance, or feedback to inform the owner to re-examine and sign, release the morning meeting, or write letters, basic etiquette and take photos on the spot. , have been supported by colleagues, especially the front desk information officer, and have been generous for many times.

Everyone knows that I am new here and take special care of me. Every time someone kindly reminded me not to miss it, and even taught me how to cancel the order and close the problem point ... everything touched me. Philosophers say that a perfect team is the guarantee of success, and I deeply feel this in a charming big family.

In order to integrate quickly, I take a small notebook with me. When my colleagues remind me of something, I will write it down on the spot and then read it often to show my vigilance. Always sum up your own shortcomings, learn from others' strengths and improve your professional level. From ignorance to understanding, from the beginning to the details, it has been praised and supported by many owners, which makes me very happy and feels that my efforts have been rewarded.

Second, love and dedication, warm service.

I just arrived in the 10 and 1 1 areas, which happened to be centralized delivery.

When I took the owner to inspect the house, I seriously answered every question raised by the owner, and explained in detail the planning of the community, the brand of interior decoration materials and the matters needing attention in house maintenance. Record the owner's dissatisfaction in detail, and distribute the problem points of the house inspection list to all subcontractors for maintenance in time; Inform the owner to re-examine the completed problems and sign the house inspection form.

Most owners are satisfied with our service, and our labor is praised by the owners, which also adds a touch of bright color to Vanke team.

After the delivery of the house, with the improvement of the occupancy rate of the owner, there are more and more maintenance problems. Every time I receive a repair report, I quickly go to the scene to check and confirm the non-man-made damage, fill in the maintenance plan and inform the owner, then send a bill to the workers to arrange the repair at the owner's house, and sign it after completing the task. Then I have been responsible for entering the house maintenance platform to cancel the order and close the problem point in the company's cm network.

Third, handle affairs impartially and treat people sincerely.

Sometimes owners do not pay attention to man-made damage, such as planting flowers and watering a house, which leads to the expansion and deformation of the floor. Calling to complain is the quality problem of our materials. I will explain this situation after on-the-spot investigation. No matter whether the host growls loudly or cynically, I will be honest with him.

The Bible says that when other people's anger burns, you can only put it out if you treat it calmly. Most owners will be influenced by our attitude. I believe that if you treat others with sincerity, they will put themselves in your shoes. The company's system can't be chaotic. As long as it is not chaotic, others can't be chaotic.

Fourth, rigorous and meticulous, self-discipline.

Every time you go to the host's house, you should wear a shoe cover regardless of whether the host is in charge or not. It is one thing to say politely that "there is no need for chaos at home", and it is another to abide by the company system.

Once in a repair shop, the owner was very cheerful and seemed to be a cultural person. He also handed it to the construction workers when he smoked it himself. I resolutely stopped "you can't pick up cigarettes and smoke in the master's room". The host advised that "rules are nothing more than human feelings." I replied, "Human feelings are not a bad rule." The host smiled, no longer reluctant, but also praised our Vanke "self-discipline, people always respect."

Five, love the owner, timely feedback.

Based on the service concept of "thinking for the owner and taking the owner as the center", I will call the owner after each maintenance and ask him if he is satisfied and what needs to be improved. Frequent communication with the owners has also enhanced mutual trust and understanding.

Sometimes enthusiastic hosts will also send some small gifts, such as mineral water and snacks. I am deeply grateful and refuse to take "serving everyone is my job responsibility." Some owners also posted praises on the charm forum, and even wrote poems to each other. "There is a heroic spirit, and it is difficult to solve worries between talking and laughing ... Love is one in a million. Who said that women are not as good as men?" So kind that I can only thank him for his kindness.

Although I am young and have limited work experience, I will give full play to the advantages of young people, such as studious, diligent and energetic, and strive to become an outstanding talent and contribute to the development of the company. With the care of leaders and colleagues, I will be more confident to do a good job in maintaining 10 and 1 1 areas.

I have been working in Hengxin for two months, which is neither long nor short. I still remember that at the beginning, under the opposition of my family and the incomprehension of my classmates, I gave up the good salary and welfare benefits of state-owned enterprises and came to work in a private enterprise that had just started in Hefei. The pressure is really great, but if I lose something, I will gain something. Up to now, I still think that working in Hefei Hengxin for two months is a very wise and correct choice.

I have never been engaged in real work from school to school, so I just came to the company and don't know the future direction. I'll finish whatever I'm asked to do, two-dimensional engineering drawings, three-dimensional model establishment, factory machine debugging records, go to Tianjin to do experiments, contact customers by phone, and go out to negotiate with leaders. Thank you very much for your attention to me. These things let me participate, let me practice, let me exercise, and I also learned a lot from them.

The following is a detailed introduction of my work:

1, 2D engineering drawing:

Two-dimensional engineering drawing has not been touched for three years since I started my graduate school, and autocad software has not been touched for more than three years. However, the two-dimensional engineering drawings in the first two months have become an important part of my work, from the initial modification of the dimensional tolerance of the two-dimensional engineering drawings of 2, 0/2 and 4 intake manifolds to the complete simulation redrawing of the engineering drawings of the cover and oil pan of Mercury Company. I am familiar with the complete design of the cover of 1 8 and the engineering drawings of the three small baffles on it, and move forward step by step. Mercury's two-dimensional drawings became the reference standard for Wang Bin's drawing. Although he thinks this is the original version of Mercury Company, I think my imprint is clearer than Mercury Company's, which is more in line with China people's thinking of looking at pictures. 1 and 8 cover the latest and complete design of the engineering drawings of three small stations, which takes less than one and a half hours from beginning to end, and an average of two-dimensional engineering drawings can be completed every half hour. But I have to admit my shortcomings. Because I am not familiar with the plastic technology, I feel that there is no concept when marking the dimensional tolerance. This may be the difference between plastic parts and iron parts.

2, three-dimensional model establishment:

The establishment of three-dimensional model is not strange to me, because during the postgraduate study, both the finite element analysis of parts and the kinematics and dynamics analysis of the whole vehicle need three-dimensional model. Although these three-dimensional models are directly provided by manufacturers, considering the complexity of finite element model pretreatment, I still learned some knowledge about three-dimensional model establishment to help me shorten the time of finite element analysis pretreatment. After all, sometimes it is much easier to modify the model directly in cad software than in cae software.

In these two months' work, the only three-dimensional modeling I have done is the sewing of 1 and 8 cover models. Although it was finally handed over to Bochuang Company due to technical and time problems, I still want to explain that this model, I just sewed all the parts that have been made. During that time, I worked late for many days and really wanted to finish it well. Although all the responsibility was finally blamed on me, I accepted it. Because I participated in this model, I feel I have the responsibility to bear it.

However, one thing has to be mentioned. It's true that all the faces are sewn without the size of 500m, but many repeated faces have not been deleted after repeated revisions. I am willing to take this responsibility, because I feel that I have many shortcomings in the three-dimensional modeling method, and I have to warn myself to study three-dimensional modeling well in the future.

3, factory machine debugging:

I've only been doing this for a few days and I don't know much about it. Because most of my classmates are engaged in control theory when they are in graduate school, I think it is not too difficult for this machine to achieve the ideal work. After all, the actions of faulty hot-fitting equipment are very simple and do not need too advanced control theory. Just improve the accuracy of the machine.

4. Go to Tianjin to do experiments:

At first, I thought this experiment was very important. The engineers of Jianghuai and I treat this experiment very carefully and seriously. At that time, every experimental step was carefully recorded, thinking that the result of this experiment would have a great influence in the future. But after I came back, I learned from the chat with the engineers in Jianghuai who went to participate in the experiment with me that this experiment was not a comparative experiment at all. The rapid prototyping parts manufactured by our company are brand-new intake pipes designed by JAC design company, which are completely different from those imported by Mitsubishi. JAC asked us to do this experiment, imagining that the final result would be exactly the same as the imported intake manifold, but unfortunately the result did not come true.

5. Contact customers by phone:

The most typical job is to discuss the insert modification with psm company. Teacher Chen criticized me many times and said that my way of speaking was too modest. At first, we asked for 15 samples of inserts, then 30 samples, then 50 samples. I think we should adopt this tone of mutual consultation. I admit that there is nothing wrong with Mr. Chen's way. As the demander, it is reasonable to ask the supplier to agree to our request unconditionally, but the final result is still very good. The contact person of psm company agreed to our request for increasing the number of samples needed, and told me that she was trying very hard to contact Wuxi to speed up the delivery. The final delivery date is only one day later than July 20 as requested by Mr. Chen. Strictly speaking, both sides have completed the work of this batch of samples satisfactorily. After all, as a transaction, both sides are satisfied with each other.

6. Go out and negotiate with leaders:

Teacher Chen's firm negotiation is something I should study hard, something we should and should not do. Before the negotiation, I understood everything in my heart. During the negotiation, I let the other side know our strength, dared not despise it, and expressed my clear position, but it was not too tough and put too much pressure on the other side. This problem is difficult to grasp in the negotiation process, which is also the place that Teacher Chen reminded me many times.

Time flies, and my three-month probation period has ended in a blink of an eye. This is a precious experience in my life, which left a deep memory for me. During this time, the leaders gave me enough tolerance, support and help, which made me fully feel their "all rivers run into the sea" mind, the heroism of an engineer "how can I see a rainbow without experiencing wind and rain", and the hardship and firmness of an engineer as a pioneer. While I am in awe of them, I am also surprised that I have the opportunity to become a member of the engineering community.

When I first came to the company, although I graduated from civil engineering, I didn't actually come into contact with the engineering industry, so I didn't know much about construction. Because there is a big difference between theoretical knowledge and practical work, how to actually understand the meaning of engineering, know the specific steps of construction, and all kinds of matters that I should pay attention to during the probation period, and how to deal with all kinds of people engaged in engineering has become my top priority.

When I first arrived at the construction site, I felt at a loss and didn't know how to start and where to start. Under the guidance of project manager and construction supervisor, I gradually know what I should do and what I can do. Here, I would like to express my sincere thanks to all the leaders and colleagues who have helped me. My personal work is summarized as follows:

1. When I got here, I got to know all the leaders and the staff of various construction teams. I contacted them voluntarily. Through them, I learned the general situation of the project and the situation of each project, and I knew the specific construction steps of these projects.

2. Through my efforts to go to the construction site every day, I learned about the matters that should be paid attention to in engineering construction (such as reinforcement, concrete pouring and other matters needing attention), how to ensure the smooth progress of construction, how to save materials and so on.

3. Because I usually help to do some information, I am familiar with the general work flow and work content, and cultivate the librarian's careful and serious work attitude. At the same time, I have been exposed to the knowledge of budget settlement, and I will try my best to deal with these problems independently.

On the construction site, I not only learned the knowledge of civil engineering, but also learned some knowledge of indoor decoration and water and electricity installation through on-site observation and operation.

5. Because I have done measurement before, I can operate instruments such as level and total station smoothly here, and I can independently calculate the engineering quantity for the construction team, and so on.

6. In other aspects, I came to Jiuzhai construction site and met many friends and colleagues. In my spare time, I will ask them for some work-related knowledge. Although sometimes I can't get satisfactory answers, I feel very happy to get along with them. I will try my best to help them if they need it.

7. I also have many shortcomings in my work, such as not being active enough sometimes. As I am a novice in this project, I am not perfect in dealing with some details. I believe I will try my best to do better in the future.

The above are my achievements and shortcomings in the past three months, but I know that this is still far from the requirements of the company and leaders. In the future work, I will work harder to satisfy the company and leaders. In my spare time, I will review my theoretical and cultural knowledge, and strive to obtain relevant qualification certificates as soon as possible. I believe that theory combined with practice will definitely lead me to success. I will give full play to my personal advantages and contribute to the company. Thank you!

Time flies. In the intense and fulfilling work every day, I have been in the company for more than half a year in an instant. In the past six months, my colleagues in the department helped me enthusiastically, and the company leaders cared about me, so I passed the critical period of the transformation of students and professionals. I learned a lot and felt a lot.

After reporting to the department, I feel a strong learning atmosphere during my work and study. If you have any questions, you can ask the teacher. The teacher will help me enthusiastically and give me answers. Every department arranges professional training every week, which helps me a lot as a new employee. The most important thing is that during the training process, I have developed a good habit of studying by myself.

I think it is the cultivation of a sense of responsibility, which Mr. Wang and Mr. Zhao have always emphasized to us. As a pre-sales person, first of all, you should have a sense of responsibility and treat every project and every customer with a master attitude, because in the eyes of users, pre-sales personnel are technical experts representing the company's technical level, representing a company's technical strength and image. The responsibility of pre-sales personnel also determines the customer's impression of the company and the success rate of the project. Therefore, as a pre-seller, we should not only impress customers in technology, but also give them a responsible attitude towards the project. This is also the most basic quality before sales. This is also the corporate culture of Inspur: paying attention to customers and being responsible for customers, that is, being responsible for the company.

After half a year's work and study, there are two things that make me feel most inadequate. First, I don't have enough memory and understanding of technical knowledge and products, and many things only stay on the surface impression, which leads me to be unable to develop my ideas quickly when making plans. Many things need to be searched and confirmed again, which is inefficient and wastes a lot of time. Second, there are some shortcomings in demonstration, and there is still much room for improvement in demonstration ability. But I believe that with the increase of time and the accumulation of experience, these problems will be solved in the future work and study process.

As a new employee, I will strive to improve my business and technical ability, so as to make customers more satisfied, make customers trust me and bring greater value to the company. No matter what kind of difficulties I encounter, I will try my best to overcome myself. I think it is worthwhile to suffer again.

;