Make fun of the instruction manual of Jiuyang Soymilk Machine.

The instructions don't specify how many soybeans there are, only roughly estimate according to the number of family members, and we have to finish! Please read carefully before you do it!

Instructions for use of Jiuyang Soymilk Machine.

Chapter 1 Precautions for Safe Use:

# When cleaning, please pay attention to the upper part of the nose.

# Please cut off the power supply before taking it out or putting it in the nose;

# Please don't heat after pulping. Flap, otherwise it will cause pipe plugging and paste.

# Please select the corresponding function key according to the instruction.

# Be sure to take the filter cup out of the cup when making soybean milk.

# Add water between the upper and lower water levels (when making rice paste, add water to the upper water level.

1. Don't let water enter the socket on the nose. If water enters, it must be dried before use.

2. Please clean the cup, spill-proof electrode and temperature sensor in time.

3. When the machine works late or after the work is finished, don't pull out the power socket and press the button again to execute the work program, otherwise it may lead to soybean milk overflow or alarm.

4. When this machine is working, please don't forget to install the abrasive machine, otherwise the machine will overflow during the beating process to avoid splashing and scalding.

5. When putting the soybean and rice into the cup, pay attention to spreading it evenly at the bottom of the cup as much as possible.

6. When pouring soybean milk, press your hand to the machine head or remove the machine head before pouring soybean milk to avoid slipping and hurting people.

7. The soymilk machine should be placed in a place where children are not easy to meet at work.

8. Clean the grain washer in time.

9. When disassembling the grain refiner, please use cold water to cool it, so as not to scratch your hand with excessive force.

10, this machine adopts high-speed motor, and it is normal to have intermittent slow and slow sounds when crushing.

1 1. When the machine is working, keep a certain distance from the socket and other charged objects, so that the plug is within reach and away from inflammable and explosive articles. At the same time, the grounding wire of the power socket must be well grounded.

12. If the power is cut off during the operation of the machine (especially during the period from beating to work completion), please do not press the function key to work, otherwise it will cause the electric appliance to paste the tube, the soybean milk will overflow during beating, or the machine will give an alarm.

13. If the power cord is damaged, you must go to the after-sales service department of Jiuyang Company to buy a special power cord for replacement.

14. If the water temperature is low when making soybean milk, it will take more than 20 minutes to make soybean milk.

Don't put the machine head into the cup after cleaning, so as to avoid odor caused by high weather temperature. Please put it in a ventilated environment.

Chapter III Usage

First, the production method of soybean milk

1, according to the model and function, measure the ingredients with the randomly equipped bean curd measuring cup. Note: When making whole-grain soybean milk and wet soybean milk, the dried soybean should be cleaned and fully soaked (5-6 hours in spring and 8-9 hours in winter). When making mung bean rice paste, mung beans don't need to be soaked.

2. Add ingredients to the cup. Please clean the measured ingredients or soaked beans and put them in the cup.

3. add water to the cup. Please add water between the upper and lower water lines. This machine has the function of preventing dry burning without water. If there is no water in the cup or the water level is too low, the machine will not work to ensure safe use. )

4. Install the grain refiner. Take out the grain refiner and install it in the direction of the arrow in the installation instructions. The mouth and the lower cover of the grain refiner should be tight and seamless. After installation, pull it down by hand, and the grain refiner will not move, indicating that it is in place.

Special note: Please don't forget to install the grain refiner.

5. To make soybean milk, please put the machine head into the cup according to the correct position, plug in the power cord, and the function key will light up circularly. Select the corresponding function key and the program will start.

6. After the pulping machine performs multiple pulping and full boiling according to the set procedure, the electric heater and motor stop working, and the machine gives an audible and visual alarm, indicating that the soybean milk is ready. Unplug the power plug and you're ready to drink.

7. Filter soybean milk (only for dry bean and wet bean soybean milk) When making dry bean and wet bean soybean milk, the pulp and residue are cooked together, and the nutrition is released more fully. Users can filter soybean milk according to their own preferences, which can make the taste more delicate.

All the above processes are controlled by microcomputer, which takes about 20 minutes and consumes less than 0.2 degrees of electricity, and successfully makes delicious and smooth drinks such as soybean milk.

Second, fruit and vegetable cold drinks and methods (taking banana milk juice as an example)

1, to measure the ingredients, please cut bananas (or other fruits and vegetables) into blocks similar to the size of peanuts, and take out 3 cups with the randomly prepared dried beancurd measuring cup.

2. Put the measured bananas (or other fruits and vegetables) into the cup.

3. Add milk and ice water to the cup. Please add milk and ice water between the upper and lower water lines according to the ratio of 2: 1.

4. Install the grain refiner. Take out the grain refiner and install it in the direction of the arrow in the installation instructions. The connection between the grain refiner port and the lower cover should be tight and seamless. After installation, pull it down by hand, and the grain refiner will not move, indicating that it is in place.

Special note: Please don't forget to install the grain refiner.

5. Make a cold drink of fruits and vegetables. Put your nose in the right position in the cup, plug in the power cord, and the function indicator lights up cyclically. Choose the fruit and vegetable cold drink function. At this time, the indicator light corresponding to the fruit and vegetable cold drink lights up, and the fruit and vegetable cold drink begins.

For this function, you can choose the strength (strength) of the cold drink. Please select the depth you need within 5 seconds. After selecting the corresponding function, the program will start in 5 seconds.

6. When the pulping machine performs pulping for one or more times according to the set fear program, the motor stops working, and the machine gives an audible and visual alarm to remind the fruits and vegetables that the cold drink is ready. Unplug the power plug and you're ready to drink.

All the above processes are automatically controlled by microcomputer, and it takes about 2 minutes to make fruit and vegetable cold drinks successfully.

The specific workflow of fruit and vegetable cold drink function is as follows:

Special note: If you want to use the fruit and vegetable cold drink function for many times, the interval between each time should be more than 10 minute, and then start the next work after the motor cools down, otherwise the service life of the motor will be affected.

Third, the key operation of special instructions

1. When the power is turned on, the machine will beep and the function indicator light will light up circularly. Select the corresponding function, start it, and the machine will start working.

2. When the machine is working, selecting other keys will not work.

3. If the button error is found before the first motor operation, please turn off the power supply. If the water temperature is not high, you can plug in the power immediately and re-select the correct button to work. If the water temperature is too high, you need to wait for 3-5 minutes, then plug in the power supply and re-select the correct button to work.

(Note: If you press the wrong key when selecting the key, the taste of the beverage may be bad. Please select the correct key to operate. )

Four, five grains of soybean milk, beauty rice paste,

Fruit and vegetable cold drinks, dried beancurd, wet bean paste and nutritious rice paste have special instructions. When producing whole-grain soybean milk, nutritious rice paste, fruit and vegetable cold drinks, dried beancurd, wet bean paste and nutritious rice paste, please strictly follow the quantity and method recommended in the Production Method of Whole-grain, nutritious rice paste, fruit and vegetable cold drinks, dried beancurd, wet bean paste and nutritious rice paste, otherwise the production effect will be affected.

Chapter IV Maintenance and Maintenance

After cleaning this machine, please clean it in time for the next use. (Note: Because the buckle between the grain refiner and the lower cover is too tight after heating, please cool it with cold water before removing the grain refiner to avoid scratching your hand with excessive force).

1. Machine head: Please gently wash away the soybean milk or other things attached to the lower part of the machine head with water. Don't immerse the nose in water, and don't wash the upper part of the nose with water to avoid short circuit caused by water entering the nose.

2. refiner: please clean the refiner carefully with a cleaning block and pay attention to washing to avoid the smell of residual soybean milk.

3. Electric heater: Please clean the electric heater with a cleaning block, and clean up the soybean milk film or other things attached to the electric heater to avoid a burnt smell next time.

4. Cup body: Please clean the cup body carefully with a cleaning block, clean the bottom and side of the cup body, and rinse it with clean water.

5. Storage: Please store this machine in a dry and ventilated place.

6. Note: Do not eat the soymilk in the cup before the soymilk machine normally completes the process.