Causes of motorcycle engine oil leakage

Oil leakage of motorcycle engine in use is also a common fault. There are many reasons for this failure.

Usually requires professional maintenance.

The actual effect of pasting water outside is not ideal.

First of all, the oil leakage of motorcycle engine is mainly caused by damaged gasket, improper assembly and cracked shell.

Therefore, when repairing this kind of fault, it is not only necessary to glue outside.

It is necessary to determine the cause of oil leakage.

As long as the reason is clear and the maintenance is carried out through relevant operation methods, the fault can be finally solved.

For example, the oil leakage of engine cylinder head and gearbox is basically caused by gasket damage.

At this time, if glue is applied to the outside, it can only delay the degree of oil leakage, but it can't fundamentally solve the oil leakage problem.

The most reliable way to eliminate this fault is to replace the gasket, which needs to be disassembled and repaired.

Because the engine will produce certain high temperature and high pressure during use, even if your 502 glue is strong, the gap between the two contact surfaces can be repaired.

But in fact, due to pressure and high temperature, the repaired cracks are easy to crack again, so the oil leakage fault cannot be completely solved.

Replacing the gasket and applying a little sealant can fundamentally solve the problem.

This is mainly because the lubricating oil can be completely blocked inside the engine under the dual action of gasket and sealant.

Even if the pressure and temperature of the engine will affect its sealing effect at this time, as long as the quality of the gasket is acceptable, there will be no oil leakage because of the large contact area between the two.

In short, when the engine leaks oil or leaks oil, it is impossible to eliminate the oil leakage by finding out the cause of the oil leakage and carrying out professional maintenance instead of simply gluing.

Million car purchase subsidy