Scraping putty joke

Water-based paints are difficult to be the same as those on the market. ...

The finished mixed water products on the market are all machined, with good flatness and smoothness. ...

Manual paint mixing is difficult to achieve the above effect ... if it needs to be repaired or reworked, it can be scrapped and redone ... if it is thickened! ! Sweat, it will shell or crack in the future.

Clear water. Uneven? Usually decorative panels. The unevenness and potholes should be caused by the following situations:

1. When cutting the panel, the skin is torn, or some edges are hairy ... that is to say, the panel quality is not good enough. You can see it from behind ... like broken wood. Unlike the front.

Whole grains. This board is very fragile. When cutting, the knife is cut in folds, and the edge may be hairy. ..

2. The process is different,

When the decorative board was used as a door cover, someone glued it on with universal glue ... It smells very strong, but it smells very strong. It's formaldehyde ... Hey ~ ~ Do you think it's super?

White latex is usually used ... after painting, it will be left for a short time. It's strong, no problem ... it has no smell ... more commonly ... and it's more expensive than all-purpose glue.

After pasting, someone nailed it directly to save trouble ... The nail mouth is large, the impact force is strong, and it is easy to destroy the surface finish ... Although it can be filled with putty, the hole is large, so in the future,

Draw well and pay attention. .....

Particle nails are commonly used, and small nails will not damage the surface. If you can find them after painting, hehe, I suggest you become a detective. ..

Clear water is not easy to change ... mixed water is better ... I suggest doing less mixed water in the future. ...

After the paint has been repaired, it still doesn't feel good ... it may not be removed ... if it is in other places, such as the countertop ... the backlight is pitted and ugly, in the living room. If they don't remove it, I suggest you ask the workers to put the skin on it. You can buy it in the market ... putting the skin in paint will improve a lot ... Hehe, I have encountered this kind of thing. .....