Joke Collection Website - Cold jokes - Chemical reaction in printing
Chemical reaction in printing
First, the photochemistry of silver salts.
In order to understand photographic chemistry, we must first consider the photochemistry of silver salts. A typical photographic film contains tiny crystals composed of extremely insoluble silver salt (silver bromide AgBr). These particles are suspended in gelatin, and the obtained gelatin emulsion is melted and coated on a glass plate or a plastic substrate for use. When the light with appropriate wavelength is irradiated on the particles, a series of chemical reactions begin to occur, leaving a small amount of free silver in the particles. Initially, bromine ions absorb photons to produce bromine atoms:
Ag+Br-→Ag++Br+e
Silver ions can combine with electrons to produce silver atoms (Ag++E→ Ag), and the association inside the particles produces Ag2+, Ag20, Ag3+, Ag30, Ag4+ and Ag40. The free silver in the exposed silver bromide particles provides a latent image, which can then be developed by a developer. The aggregate needs at least four silver atoms, namely Ag40, before the exposed AgBr particles can be developed. The latent image is an "invisible but visible image" preserved in silver halide particles. Particles containing Ag40 free silver are reduced by the developer to generate a large amount of free silver, so a black area appears at this point of the film. Under the same critical conditions, unexposed particles cannot be reduced by the developer.
The sensitivity of film is related to particle size and halide composition. With the increase of particles in emulsion, the effective sensitivity of film also increases. The reason is that the number of silver atoms required for the developer to initiate the reduction of the whole particle is the same regardless of the particle size. The greater the sensitivity value, the more sensitive the film is to light.
Second, development.
Silver halide is not the most sensitive photosensitive material known. So, why can they produce the most effective images? The answer lies in that a single photon hits a silver halide particle to produce 1 nucleus with at least 4 silver atoms, and this effect is amplified by a proper reducing agent (developer) by 1 100 million times.
When the exposed film is put into the developer, the particles with silver nucleus will be reduced faster than those without silver nucleus. The more cores in a given particle, the faster the reaction. Factors such as temperature, developer concentration, pH and the total number of cores in each particle determine the degree of development and the density (blackness) of free silver deposited in film emulsion. The blackening of negative film is caused by free silver atoms (Ag0).
The developer can not only reduce silver ions to free silver, but also has sufficient selectivity. It cannot reduce unexposed particles to avoid so-called "ash atomization". Compounds commonly used as chromogenic agents include gallic acid, o-aminophenol, hydroquinone, p-methylaminophenol (Mi Tuer), 1- phenyl -3- pyrazolidone (fenidone) and so on.
Most developers used in black-and-white photography are composed of hydroquinone and Mi Tuer or hydroquinone and fenidone. Typical developer should contain 1 ~ 2 kinds of developer, protective agent to prevent air oxidation and alkaline buffer to prevent reduction reaction from being inhibited.
For example, the formula of a typical black-and-white film developer is: take 750ml of water at 50℃, and dissolve the following substances in it: 2.0g of Mi Tuer, 5.0g of hydroquinone, 0.0g of sodium sulfite100, 2.0g of borax (Na2B4 O7.10h2o), and add cold water to/kloc-0.
When hydroquinone is used as a developer, quinone is produced. For every two silver atoms produced, two hydrogen ions are produced:
Hydroquinone +2ag +→ quinone +2ag0+2h+
Because the above reaction is reversible, the increase of hydrogen ions or quinones will hinder the development process. Sodium sulfite can react with quinone and destroy its ability to return hydroquinone. At the same time, hydrogen ions are effectively neutralized by hydroxyl ions (OH-).
H++ Oh -==H2O
If the development time is too long or the temperature is higher than the specified value, dense ash atomization will occur and the negative will be scrapped. Because the development reaction speed increases with the increase of temperature, photographers usually have to control the temperature of the developer very carefully.
The development process can be terminated by putting the film into the stop slot. The bath usually contains weak acid, which can lower the pH value, such as acetic acid. The function of stopping the bath is to increase the number of hydrogen ions, which will effectively prevent the reaction of hydroquinone transforming into quinone.
Third, fixed.
If the development only produces free silver where the light intensity is the highest, and the negative film is not further processed, the undeveloped silver halide will be exposed as soon as it is taken out of the darkroom. After that, almost any reducing agent will make the negative film completely foggy. In order to overcome this problem, it is necessary to find suitable substances to remove unreduced silver halide. The most commonly used fixing solution for black-and-white photography is sodium thiosulfate solution. Among them, thiosulfate ion (S2O32-) and silver ion form a stable complex and dissolve in water, thus achieving the purpose of "fixing" the negative electrode.
AgBr(s)+2s2o 32-= = Ag(s2o 3)23-+Br-
Adding some acid to the fixing solution is to neutralize the alkalinity of the developing solution and stop the development. However, it is not advisable to add too much acid in the developer. If the pH value is lower than 4, the following reactions will occur, leading to the decomposition of the fixing agent:
S2O32-+H+==HSO3-+S↓
Na2SO3 in fixing solution will combine with H+ to form HSO3-ion. Due to the increase of HSO3= ion concentration, the decomposition of fixing agent moves to the opposite process, which inhibits the decomposition of Na2SO3. Therefore, when preparing the fixing solution, a part of Na2SO3 must be dissolved first to protect the fixing solution, and then acid is added.
In order to prevent the emulsion layer of photosensitive material from swelling due to excessive water absorption during washing, it may fall off or be easily damaged. Some hardeners, such as alum, are often added to the fixing solution.
A common formula of acid fixing solution is: fixing agent sodium thiosulfate 250g, protecting agent anhydrous sodium sulfite 25g, acetic acid (28%)48ml, curing agent alum 15g, and water to 1000ml.
thicken
For underexposed photos, the obtained image is too thin, which can be thickened by chemical methods to increase the blackness and contrast of the photos.
The basic principle of bolding is to add some information materials such as silver or other metals or metal compounds where the image information already exists in the photo. At present, the most commonly used and effective thickening method is chromium thickening method.
The chrome thickening method uses potassium dichromate (K2Cr2O7) and hydrochloric acid (HCl) to make the image fade (bleach). As a result of the reaction, the silver shadow was oxidized to AgCl, and a layer of brown chromium oxide (CrO2) was added. This effect can be expressed by the following reaction equation: 6ag+2k2cr2o7+8HCl = = 6aAgCl+3cro2+k2cro4+2kcl+4h2o.
After bleaching, it was washed with water and then developed to reduce AgCl to Ag again. However, CrO2 formed during bleaching still remains on the silver shadow, which increases the image information and makes it thicker.
Second, thinning.
In photography, only when exposure and development are correct can we take good quality photos. If overexposed or overdeveloped, the blackness of the image will increase, which can be remedied by chemical dilution.
The basic principle of dilution is to use oxidants, such as red blood salt, potassium permanganate and ammonium persulfate. First, the metallic silver in the image is oxidized into silver salts, and then these silver salts are dissolved with some chemicals to achieve the purpose of refinement. There are many common thinning methods, and the following two are the best.
(1) Hemoglobin Dilution Method
Blood red salt is an oxidant, which oxidizes the excess silver in the image into silver ferrocyanide, and then dissolves it with Na2S2O3 to achieve the purpose of refinement. The thinning process can be expressed by the following chemical reaction equation:
4Ag+4k 3[Fe(CN)6]= = Ag4[Fe(CN)6]+3k 4[Fe(CN)6]
ag4[Fe(CN)6]+8 na 2 S2 o 3 = = 4na 3[Ag(s2o 3)2]+Na4[Fe(CN)6]
(2) Potassium permanganate dilution method
In this method, photos (or negatives) are treated in sulfuric acid solution of KMnO4, so that part of metallic silver is oxidized into water-soluble (slightly soluble) Ag2SO4, thus achieving the purpose of thinning. The above process can be expressed by the following chemical reaction equation:
10Ag+2 kmno 4+8h2so 4 = = k2so 4+2 mnso 4+5ag 2so 4+8H2O
When the image is moderately thinned in the thinning solution, take it out and wash it fully, otherwise it will cause pollution or risk uneven thinning.
Third, the photo color matching
By chemical means, images can be changed into different colors. This operation is called photo color matching.
Color matching is usually done on photos. It uses chemicals to change the silver shadow into colored silver compounds, or deposits colored compounds of other metals on the image, so that the photo presents a variety of monochromatic tones. For example:
1. Sodium sulfide brown method
First, the photo was bleached in a solution containing red blood salt and KBr, so that metallic silver was oxidized to AgBr. After washing with water, it is immersed in Na2S solution to turn the image into brown Ag2S.
4Ag+4k 3[Fe(CN)6]= = Ag4[Fe(CN)6]+3k 4[Fe(CN)6]
Ag4[ iron (cyanide) 6]+4k br = = 4 agbr+K4[ iron (cyanide) 6]
2AgBr+Na2S==Ag2S+2NaBr
2. Copper salt red method
Copper salt color matching is the property that copper sulfate reacts with bleached silver shadow to produce red-purple copper ferrocyanide.
ag4[Fe(CN)6]+2 cuso 4 = = Cu2[Fe(CN)6]+2 ag2so 4
For example, the practical formula of copper salt color matching is as follows: I solution: CuSO46.3 g, potassium citrate 2.5 g, adding water to1000 ml; Solution 2: 5.2 grams of red blood salt and 2.5 grams of potassium citrate, add water to 1000 ml.
When in use, I and II are mixed, and then the fully washed photos are soaked. With the length of color matching time, you can get shades from deep purple to bright red. Finally, put the photos into running water and wash them thoroughly.
- Previous article:Scorpio boys are inexplicably angry, how to coax them?
- Next article:How to deal with others' teasing when you are drunk?
- Related articles
- Folk stories, fairy tales and historical figures about the Yellow River should be concise! ! ! ! ! ! ! ! ! !
- 2020 Moments Thank You Friends’ Heartwarming Words
- Tell parents a free composition.
- Just made a joke.
- "sensible beast" Lao Taner
- How to chase a woman who can't get in oil and salt
- Ask for a cold joke. . It's better to be longer.
- Brigitte Lin interacted with his fans in an interesting way and humorously played with his "only sister". Where is the origin of this stalk?
- Tell us what kind of player Duncan is.
- A four-word hilarious joke