When bulldozers, loaders and excavators are operating, dedicated personnel should be assigned to command and guide to prevent injuries to personnel. Regular inspections and maintenance, testing, and d

When bulldozers, loaders and excavators are operating, dedicated personnel should be assigned to command and guide to prevent injuries to personnel. Regular inspections and maintenance, testing, and daily inspections of construction machinery and electrical equipment should be carried out in accordance with regulations. Anything that does not meet the requirements is strictly prohibited. use. 23. Safety requirements for falling and object impact: High slope operations should mainly cause construction workers to fall and dangerous rocks on the slope to impact personnel. Therefore, slope construction workers must wear personal safety protective equipment during the construction process, and construction workers with a small range of activities must wear safety ropes; for those who transport materials up and down, safety nets should be installed in the material transport channels for protection. All personnel entering the construction site must wear safety helmets as required, abide by regulations and obey instructions; strengthen safety and security, and prohibit idle personnel from entering the construction site. For dangerous rocks and loose rocks on the slope, special personnel should be sent to clear them and be directed by special personnel. Cleaners must wear safety ropes, stand in a stable and safe position above them, and use sled bars to clean. 24. Requirements for safe and civilized construction at the construction site: There should be protective facilities or danger warning signs (including safety reminder signs and safety signs, etc.) for dangerous cliffs, steep slopes, dangerous rocks, etc. on the construction site, and there should be walking paths for machinery and equipment with turns, steep slopes, and narrow Set warning signs in dangerous areas. 25. Strictly implement the safety inspection system: Daily and regular safety inspection systems must be implemented. Full-time safety officers of the project department insist on daily safety inspections, educate and punish those who violate various safety regulations, investigate potential safety hazards, and order the construction team to make rectifications if problems are found. Organize regular safety inspections, guide and supervise the construction team to do a good job in safety management. 26. Technical training for special technical workers: Special technical personnel in construction, according to the "Regulations on the Administration of Safety Technical Assessment of Special Operators", special operations include: electricians, blasters, cranes, erect workers, boiler workers, etc., before engaging in special types of work Operators must undergo professional training and pass the examination before operating, and must hold a job certificate. It is strictly prohibited to work while drunk. For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd