6 self-inspection reports on production safety hazards

Safety production self-inspection report 1

In order to actively respond to the spirit of the Municipal Drug Supervision and Administration Commission [20xx] No. 173 "Crack down on violations and ensure safe production". In order to effectively improve the safety production of drugs, our company organized a special meeting. The meeting required a unified ideological understanding and a full understanding of the importance of safe production.

1. Organizational Leadership

Our company established a self-examination leading group for drug safety hazards at the meeting on November 9. The general manager of the company serves as the team leader, and the heads of various departments serve as deputy team leaders. And conduct full and careful research on the implementation plan to ensure the authenticity of the self-examination and ensure responsibility to the company. The implementation work shall be under unified leadership, arrangement and deployment. The study decided to solve the problems existing in the investigation and rectification of production hazards and coordinate the rectification work.

Team Leader

Deputy Team Leader:

Members: Workshop Directors and Operators

2. Scope and Characteristics

Scope of inspection: Comprehensive and detailed inspection and rectification of all hazard sources in the entire factory, including drug production, inspection, storage and other links.

Key points for inspection:

1. Warehouse: the environment where raw materials and finished products are stored;

2. Quality Department: storage of chemicals and possible confusion Medicines should be stored in separate zones; for dangerous chemical reagents, monitoring and management should be strengthened and filed with the public security department.

3. Production workshop: Operators perform standardized operations and management according to relevant GMP requirements.

4. General Department: Responsible for carefully checking the power lines, fire water pipes, fire extinguishing equipment, fire exits, etc. in the factory area.

3. Inspection Content

The person in charge of each department shall organize the department personnel to carry out self-examination and hidden danger inspection, and the implementation status of each link, each position and each safety measure shall be reviewed Check it out.

Comprehensively implement safety production standards in the pharmaceutical industry, standardize and improve safety management, and improve enterprise production levels; improve various safety regulations and requirements, and find out the implementation of job responsibilities, infrastructure, technical indicators, and environment situation, prevention and control measures and other hidden dangers. The details include the following:

1. Implementation of the production safety responsibility system. The person in charge of the enterprise and the person in charge of safety sign a letter of responsibility, and the person in charge of safety signs a letter of responsibility with the implementer to ensure that the responsibility is implemented.

2. Implementation of safety production regulations and systems In accordance with relevant laws and regulations and GMP specifications, safety measures of each department are implemented. Alarms and fire-extinguishing equipment must be equipped in the production, inspection, and storage links, and anti-static and explosion-proof devices must be installed in key parts of the equipment.

3. Hidden hazards should be investigated and rectified to identify major hazard sources. Important equipment and links should be monitored and emergency managed, and files should be established for the investigation and rectification of hidden dangers. There must be records of flammable raw materials and packaging materials.

4. Emergency management situation

(1) According to the specific requirements of the "Guidelines for the Preparation of Emergency Rescue Plans for Hazardous Chemical Accidents (Developed by Units)" and the actual production and use of hazardous chemicals Develop a complete emergency plan based on the actual situation. Organize employees to conduct fire emergency drills at least once a year and keep records.

(2) Our company and the county fire brigade have been conducting large-scale drills at least twice a year in recent years. This is conducive to improving awareness of safe production and mastering emergency methods. At the same time, it enhances the understanding of firefighting work, promotes the development of military-civilian relations, and deepens the importance and necessity of safe production.

3. Inspection results

All instruments, instruments, pressure pipes, pressure vessels, and production equipment of xxx company comply with national safety standards, the production process is reasonably formulated, and the factory environmental sanitation complies with national standards. County-level health creation requirements.

Safety production self-inspection report 2

In order to effectively carry out the company's safety production work in the second quarter and ensure safe and stable production operations, according to the Junxian County Safety Conference and the company's 20xx safety production work arrangement The company leaders attached great importance to the spirit of the relevant notice and quickly conveyed the spirit of the notice to all departments and teams. At the same time, they held a safety meeting of the company's leadership team to arrange and deploy the company's safety production work in the second quarter, implement various safety measures, and conduct safety inspections on the company. In the production inspection, the self-inspection situation is now reported as follows:

1. Implementation of the safety production responsibility system

In order to clarify responsibilities, a company with the general manager of the company as the first responsible person was established. A production safety leading group composed of the principal persons in charge of each department. The concept of "people-oriented, safety first" is established in the work, and high-level requirements are put forward for the heads of each department that "managing production must manage safety, and managing safety must understand production." The company is equipped with full-time safety officers, and has formulated a safety production position responsibility system suitable for the company's characteristics. It has decomposed the safety production responsibility system layer by layer, strictly implemented the responsible subjects, and truly achieved clear responsibilities, assigned responsibilities to each person, and everyone has their own duties. duties to ensure the smooth development of safety production work.

2. Self-examination situation

(1) Fire protection facilities: The raw material yard of the company’s Marketing Department and each team are fully equipped with fire protection equipment, including fire boxes and fire signs, and dry powder fire extinguishers. Within the validity period. Implement the fire safety responsibility system step by step, improve emergency rescue plans, and strengthen emergency drills. Conduct special inspections and rectifications on fire protection facilities such as offices and production teams. Focus on careful inspection of fire-fighting facilities and fire-fighting equipment to ensure nothing goes wrong. Smoking is strictly prohibited where there are oxygen bottles and acetylene bottles.

(2) Equipment safety: The company organizes personnel to focus on checking whether pressure vessels and pipe network pipes have usage licenses and whether they have undergone regular inspections. The leakage of some power lines in the production workshop discovered during the early inspection without any protection has been improved. The cables in the raw material storage area were crushed or cut by passing vehicles. All of them have been replaced and reinforced. It is necessary to strictly prevent the operation of various facilities with diseases and ensure that special operators have certificates to work and whether the equipment is in good operating condition.

(3) The company office strengthens vehicle management; requires drivers to strictly abide by relevant laws and regulations on urban and highway traffic management, strengthen professional ethics, and ensure driving safety. Timely correct and severely crack down on fatigue driving, speeding and overloading and other illegal behaviors, conduct frequent comprehensive inspections of vehicle safety performance, prevent hospital vehicles from taking the road, equip fire-fighting equipment to prevent spontaneous combustion and fire accidents, and ensure vehicle driving safety.

3. Determination of major hazard sources and emergency situations

According to the company's own situation, through unsafe behaviors at work, unsafe conditions of items, unsafe factors in the operating environment, etc. A risk assessment was conducted, major hazard sources were identified, and corresponding emergency plans or management plans were formulated to prevent accidents. The major hazard sources identified by the company include: ①. Working at height; ②. Pipe network burst; ③. Mechanical injury; ④. Fire and explosion; ⑤. Flood; ⑥. Construction electricity. The company's full-time safety officers regularly inspect key areas such as the hydrolysis workshop, raw material storage yard, power distribution room, tank area and boiler section, and strictly abide by the safety production inspection system, at least once a month

During major inspections, rectification measures will be formulated for potential safety hazards discovered during inspections or inspections, with clear deadlines for rectification. At the same time, supervision and inspection will be strengthened to ensure effective rectification of hidden hazards.

The company has formulated special emergency plans for major hazards such as fire, flood control, and pipe network bursts. The rescue procedures and rescue measures in the plans are complete, and the plans are coordinated and closely connected. The company has conducted training and drills on various plans, and ensured that relevant personnel should be aware of and master them proficiently.

4. Shortcomings

(1) Some of the company's power supply lines are aging and need to be replaced urgently to avoid fire hazards when the power load increases during summer operation.

(2) The company's automatic boiler has been renovated, the operating skills of employees have been further improved, and automatic boiler safety operation knowledge training has been strengthened to ensure the normal operation of the boiler.

(3) The safety awareness and safety quality of some employees need to be further improved. They must continue to adopt various forms to do a good job in safety production publicity, especially strengthen production safety and fire safety publicity, and further improve the company's safety awareness and safety quality. Employees’ awareness of production safety.

Safety production self-inspection report 3

Since the launch of the safety production inspection activities, the company's safety department, under the leadership of the manager in charge, has conscientiously implemented the arrangements for the inspection activities. The company immediately launched in-depth self-examination and self-correction activities. The progress of this work is now reported as follows:

1. Check the formulation of rules and regulations:

Under the leadership of the leaders in charge, the company’s safety department The production rules and regulations have been comprehensively inspected, and the company's production safety management files have been supplemented and improved. The engineering company's safety production responsibility system, safety production fund guarantee system, top-down safety production grid diagram of the engineering company and company managers have been established. Safety production responsibilities, safety production responsibilities of the company's deputy manager in charge of safety production, safety production responsibilities of the company's safety department, safety production responsibilities of the company's construction site project manager, safety production responsibilities of the company's construction site safety officer, company janitors, security, fire protection, and anti-theft safety production responsibilities, formulated the company's emergency response plan for safety production accidents, formulated the company's flood control duty system and flood prevention emergency response plan, the company's fire safety emergency response plan, the company's electricity safety emergency response plan, and also established and improved the company's various work types Safety production operating procedures and safety production inspection and assessment systems. Safety production training and education system for new workers before taking up the job, safe use records of equipment and facilities, certified work records for special types of work, safe driving and maintenance records of vehicles, and safety production reward and punishment systems. The establishment of various safety production systems provides a solid guarantee for the company's future safety production work.

2. Check the company's production safety situation:

The safety production work of engineering companies is characterized by many points, wide coverage, line factories, and complicated types of work. To do a good job in safety production work, just It is difficult to rely on the existing full-time personnel of the safety department, so the company's safety department found a way to do a good job in the company's safe production after a long period of exploration.

1. Implement safety production responsibilities and identify the main responsible persons.

The company’s main safety issue is to ensure production safety at the front-line production sites. Therefore, the company stipulates that all newly established production project departments must be equipped with four personnel, namely project manager, technician, safety officer, and material officer. Among them, the project manager is the person in charge of the project and is also the first person responsible for the safe production of the project. , the construction site safety officer is the person responsible for daily safety production and safety inspections at the construction site. The company's safety department stipulates in detail the safety responsibilities of the project manager and the safety responsibilities of the construction site safety officer. The company's safety department can only ensure that there are no problems in the entire front-line safety production by carefully doing a good job of the work of each project manager, branch manager, and construction site safety officer.

2. Formulate safety inspection and assessment specifications, and work unremittingly on safety inspections.

Formulate systems and implement inspections and assessments. The company's safety department has formulated three major inspection systems: daily inspections of production safety, monthly inspections and year-end assessments. Routine inspections are to arrange full-time personnel to inspect each construction site and factory area every day so that potential safety hazards are promptly removed or notified for rectification, and records and reviews are maintained. The company organizes construction site safety inspections every month, and the safety department focuses on inspecting the safety production conditions of each construction site. Visit the scene, check records, and if safety problems are found, put forward rectification suggestions or warn and impose fines.

At the end of each year, the company's safety department proposes rewards or penalties based on the performance of each project department and branch in safety production management throughout the year to encourage each subordinate unit to fully pay attention to and do a good job in the management of safety production work.

3. Carry out safety management of hazard sources and prepare emergency response plans.

During this major inspection of production safety, the company's safety department focused on investigating three aspects that are the sources of hazards for the company's production safety accidents, and made emergency response plans.

(1) The "Memorial Forest" cemetery managed by the company has experienced an increasing number of burials over the years, a large flow of people, and it is located in a high mountain forest area with heavy fire prevention responsibilities, especially during the "Qingming Festival". "On National Day and New Year's Eve, there are many people visiting graves to worship, which makes safety work very difficult. The company mobilized more than 30 people from various departments and units to form a safety and fire prevention team led by the company's manager in charge, which is fully equipped. Fire prevention equipment, every special holiday, all staff are on duty on the mountain to monitor safety and fire prevention work. The daily safety and fire prevention work is organized by the "Memorial Forest" office with 5-7 staff members on duty all year round, responsible for the prevention and control of safety and fire prevention work.

(2) For the company's warehouse and vehicle maintenance workshop, the Safety Department has formulated strict fire safety regulations for the company's warehouse, equipped with several fire-extinguishing machines, and arranged 5 personnel on duty to be on duty 24 hours a day, monitoring Security and fire and theft prevention work. The company's vehicle maintenance workshop has formulated a strict safety management system and work handover rules, strictly ensures briefings before work, and operates in accordance with operating procedures. Provide pre-job training for special types of work, hold a certificate before starting work, and regularly study safety production regulations to ensure that they are constantly adhered to.

(3) In the company's carpentry and overhaul workshops, we focused on checking the power lines in the workshops, checking the aging of the lines, the flexibility and usage of various electrical switches, and checking the work site. Timber stacking and necessary escape routes, etc. Strictly checked the operating procedures of production workers, the integrity of fire extinguishers, etc. to ensure that nothing goes wrong during the work process.

3. Problems in production safety During this safety self-inspection, some problems with hidden dangers were found.

(1) Safety production slogans and signs at some construction sites where project departments are located were seriously damaged.

(2) Some project departments have foreign temporary workers who fail to register and report their personnel details as required.

(3) There is an aging problem among the temporary workers employed by some project departments.

In response to the existing problems, the company's deputy manager in charge of safety instructed to conduct a careful inspection of the company's safety slogans and signs. If any damage or dilapidation is found, they will be replaced. Some foreign employees in the project department have not been registered. The problem requires all project departments to register and report temporary foreign workers in the Year of the Rooster within a time limit. Regarding the aging of existing temporary workers, the project department must be informed of the potential safety hazards and interests involved, and require them to be phased out gradually. At the same time, care should be taken to avoid such problems when hiring temporary personnel in the future.

Safety production self-inspection report 4

In order to ensure the fire prevention and anti-theft safety of our company's office environment, according to the arrangements of the company leaders, the person in charge of the comprehensive office led the relevant office personnel to form a safety inspection The team conducted a strict inspection on the fire safety and anti-theft work of the company's office building and the open-air parking lot downstairs on the afternoon of December 12. The inspection results are now reported as follows:

1. Overall safety inspection

The inspection team first inspected the doors and windows, electrical circuits and switches, corridor fire safety passages, fire protection facilities, and environmental sanitation on each floor of the office building. Then the open-air parking lot, green belt and lighting facilities outside the building were inspected. The inspection team conducted a comprehensive inspection and found that the overall situation was good and there were no major safety hazards.

2. Existing problems

1. The doors leading to the terrace on both sides of the roof on the fifth floor are not locked, and the door of the conference room on the fourth floor and an aluminum window in the conference room are not locked. The door lock on the right side of the sliding door of the reading room cannot be locked, and the door lock on the right side of the sliding door of the reading room is damaged. Outsiders can enter and exit at will, which poses a safety hazard.

2. There are piles of debris in the reading room, which are piled up in a messy manner, posing fire safety hazards.

3. The entire building is equipped with only 2 dry powder fire extinguishers, and the shelf life of the dry powder in the fire extinguishers is unknown; the fire hydrants on each floor are locked, but the keys are missing, and it is not possible to check whether the fire hydrants can be used. Normal use. There are fire safety hazards.

4. Some offices on the second floor do not lock their doors after get off work, posing potential security risks against theft.

3. Corrective measures and suggestions

1. Ask a professional locksmith to install new locks for the doors leading to the terrace on both sides of the roof on the fifth floor, and for the doors and windows of the conference room and reading room on the fourth floor. The doors and fire hydrants on each floor will be replaced with new locks.

2. Classify and organize the reading rooms in accordance with the "6S" management standards to eliminate fire safety hazards.

3. Replace and purchase dry powder fire extinguishers as needed, and review the safety status of fire hydrants on each floor after replacing them with new locks.

4. Once again emphasize the requirement that the doors and windows of offices on each floor must be locked after get off work. In response to the safety hazards discovered during the inspection, the inspection team will contact relevant personnel to make timely rectifications to ensure that there are no blind spots in fire safety and no loopholes in anti-theft security, so as to create a stable and safe working and living environment for the company's employees.

Safety production self-inspection report 5

Regarding the requirements of the 20xx safety inspection notice issued by the Construction Office, our company’s self-inspection and self-inspection of safety officers, quality officers and construction team leaders meet the requirements. Leaders at all levels are welcome to visit the construction site to guide the work. In view of the quality and safety issues in construction projects, quality and safety involve a wide range of areas, are highly practical, have many influencing factors, and have high technical requirements. Project quality and safety are the core of project construction and the key to determining the success or failure of project construction. By grasping these two aspects of quality and safety, project construction can proceed smoothly and achieve good social, economic and environmental benefits.

In order to ensure the quality and safety of construction projects, our company adheres to the principles of "quality first" and "safety first" and adopts the "prevention first" approach to conduct dynamic management and emphasize quality and safety control. With "people at the core", we ensure project quality and construction safety, adhere to quality standards, operating specifications, and strictly inspect and accept, so that the final product reaches the best of society. Our company enters the construction stage and adopts the following methods to ensure quality and safety control measures:

1. Quality control measures

1. Quality policy: Adhere to the policy of "a century-old plan, quality first" and establish A sound and complete leadership team.

2. Quality management: all management functions of formulating and implementing quality policies.

In order to achieve the specified quality objectives, organize teams and employees to participate in relevant learning activities and assume corresponding responsibilities.

3. Quality system: implements the organizational structure, responsibilities, procedures, processes and resources of quality management, and strictly controls the on-site acceptance of raw materials and semi-finished products.

4. Quality control: Adopt operational techniques and activities, cooperate with the construction unit, supervision engineers, and quality supervision departments to eliminate the causes of problems at each stage of the quality process, and strictly control "process quality control."

5. Quality assurance: Products or services must meet specified quality requirements to achieve current quality assurance. Verify and audit production, installation, and inspection work. In order to gain the trust of the construction unit, provide necessary information and evidence to relevant departments.

6. Quality objectives: On the premise of ensuring the realization of enterprise quality objectives, the quality system enables the enterprise's operating mechanism to be in the best combination of quality and cost. Only by effectively following the principle of adapting to the environment and achieving the enterprise's objectives , the principle of adapting to the characteristics of construction projects, establish and improve the company's quality system, adapt it to various environments, adapt to various project types and construction characteristics, obtain the best cost, fully achieve corporate goals, and make the company neutral in market competition Stay in an invincible position and gain maximum corporate and social benefits.

2. Safety management technical measures

Safety management at the construction site focuses on the control of unsafe behaviors of people and unsafe conditions of objects. The management purpose is to eliminate all accidents, avoid accident injuries and reduce accident losses.

1. Implement the safety responsibility system and implement responsibility management

(1) Establish and improve the safety production leadership organization headed by the project manager, and carry out safety management activities with organization and leadership.

(2) Establish a safety production responsibility system for personnel at all levels and clarify the safety responsibilities of personnel at all levels. Pay attention to the implementation of the system, pay attention to the implementation of responsibilities, and regularly inspect the implementation of safety responsibilities.

(3) Establish a safety production responsibility system for all employees to assume responsibility for safety production. Do it vertically to the end, without missing a link.

(4) All management and operating personnel shall sign a safety agreement with the construction project department and make a safety guarantee contract to the project department.

2. Safety education and training

The project department conducts safety education and training regularly and at designated locations to improve safety production knowledge and effectively prevent people from unsafe behaviors.

(1) For all management, operators must have basic conditions and high quality, and hold certificates to work.

(2) All construction and operating personnel must have legal labor procedures. Temporary personnel must sign a labor contract and receive entry education before they can enter the construction site and work positions.

(3) New workers must complete three-level safety education before entering the company, focusing on general safety knowledge, production organization principles, production environment, and production discipline. Emphasize the non-independence of operations. Mainly based on production organization principles, environment, discipline and operating standards.

(4) Mobilize all employees to carry out self-inspection, and combine self-inspection with system inspection to form a situation of self-inspection and self-correction, and inspection and correction at the same time. All employees can be improved in discovering risk factors, educated in eliminating factors, and trained in safety inspections.

3. Civilized Construction

(1) The significance of civilized construction: Civilized construction is an important symbol of modern construction, a basic management work for construction enterprises, and an important part of enterprises. window. Adhering to civilized construction is of great significance.

(2) Measures for civilized construction: The construction site is established with the project manager as the team leader, a sound management individual position responsibility system is established, and the responsibility is divided into pieces according to profession, position, area, and building number, and self-inspection, Mutual inspection and handover inspection system. Achieve self-produced and self-cleaned, daily clean-up every day, clean-up after completion of work, and standard management.

(3) Environmental protection measures: Strengthen the monitoring of dust and noise at the construction site, eliminate dust and sewage pollution, strengthen contact with local environmental protection departments, and contribute to the good environmental benefits of the enterprise.

Safety production self-inspection report 6

In order to further strengthen and improve the safety work of the project department, respond to the call of the institute, effectively protect the life safety and property safety of the majority of employees, and ensure the normal construction of the project Order, combined with the actual situation of the project department, our department conducted a careful and detailed inspection of the safety work at the construction site, and carried out hidden danger inspection and management activities at the construction site. The self-inspection and rectification situation is summarized as follows:

1 , safety management aspects

1. Establishment and improvement of safety organization structure

The project department has established a safety management network and safety production responsibility system and safety management with the project manager as the first responsible person. system. A full-time safety officer is assigned to be responsible for on-site safety inspections and safety inspections at the construction site, forming a top-down safety assurance system.

2. Implementation of safety management system and responsibility system

(1) At present, the project department’s safety regulations are complete and highly operable. Continuously improve the execution of safe and civilized construction systems to strengthen safe and civilized construction management and prevent accidents.

(2) In order to ensure safe production, the project department formulated safety target indicators according to the company’s relevant requirements and decomposed them layer by layer, clarified the safety responsibilities of personnel and departments at all levels, and carried out safety inspections during the construction process. Supervision is implemented in place.

The project department signed a "Safety Responsibility Letter" with the heads of each construction team, and strictly implemented the safety production responsibility system at all levels and the safety accident liability investigation regulations. The quality and safety department of the project department Supervise, inspect and assess the implementation of the system, promptly remind and educate those who violate the responsibility system, and provide rewards and punishments based on assessment results.

3. Safety inspection and hidden danger investigation

In addition to daily safety inspections, the project department also purchases various safety warning signs and construction signs according to the on-site conditions. During construction Corresponding warning placards should be placed at site entrances, passageways, near electrical equipment and other places to remind staff to pay attention, protect themselves and others, and eliminate potential safety hazards.

4. Safety education and training

(1) The project department conducts timely safety education and training for new site managers and workers from time to time. The main contents of the training include: corporate rules and regulations, basic safety knowledge, construction safety precautions, various relevant safety technical measures and operating procedures, emergency rescue plan learning, etc.

(2) Participate in safety technical training and certification for electricians, welders, loader drivers and other special operations personnel as required.

(3) Each construction team conducts its own team safety education activities.

2. On-site construction safety conditions

1. Temporary facilities

(1) Temporary facilities are planned in strict accordance with the requirements and the layout is relatively reasonable.

(2) Temporary facilities meet technical requirements such as fire protection, rainproofing, and heat preservation. Personnel are arranged to patrol the living and office areas, construction areas, warehouses, and mechanical equipment parking areas 24 hours a day to ensure the safety of on-site supplies and materials.

2. Safe use of electricity

The construction site ensures "one machine, one gate and one leak" for electrical equipment, ensuring the safety of electricity; warning signs are placed on power supply equipment . Lighting fixtures and power supply lines shall be installed as required. Electricians on duty will conduct regular inspections and deal with hidden dangers in a timely manner to prevent accidents.

3. Special equipment

A dedicated person is responsible for the daily operation, maintenance, shift handover records, etc. of major mechanical equipment. During the use of equipment and transportation vehicles, regular inspections, repairs and maintenance should be carried out, and equipment operation, repair and maintenance records should be filled in. Immediately stop work, rectify or remove equipment with potential safety hazards. Scaffolding construction

4. Fire management

The project department has formulated a fire management responsibility system and implemented it in place. Developed and improved fire emergency plans.

The project department has stepped up inspection and monitoring of fire-prone areas.

(2) There are no violations in work areas or parts where fireworks or smoking are prohibited.

5. Safety protection facilities

During construction, safety management personnel can formally wear and use protective equipment such as safety helmets and safety belts; protective facilities and safety equipment are set up at cave entrances and dangerous locations. Obvious warning signs; fire-fighting facilities are installed near electrical parts and flammable materials.

3. Problems in safety management

1. Individual personnel have weak safety awareness, and habitual violations still occur at the construction site.

2. The layout of construction power lines is chaotic and needs further regulation.

3. Equipment is regularly inspected and various systems are improved; however, the inspection data and records of the equipment themselves are incomplete; further improvements.

4. Some safety protection facilities have not kept up with the progress of project construction, causing safety protection to lag behind during construction.

4. Rectification measures taken:

In order to ensure the safety of project construction and eliminate various safety hazards, the project department proposed the following rectification measures for the main problems existing during the self-inspection process:

1. The project department will strengthen supervision and carry out safety education in batches, using daily inspections, inspections, meetings, safety education and training, bulletin boards, newspapers, documents and other methods to educate employee cadres on safety knowledge, Education and publicity on laws and regulations, etc., to improve employees’ safety awareness and sense of responsibility, and to prevent the occurrence of safety accidents.

2. We will continue to pay attention to the issue of electricity consumption in construction, strictly investigate the illegal use of electricity in workers’ dormitories, and conduct unified and standardized layout of on-site wiring.

3. Strengthen the supervision of habitual violations. To strengthen safety education, management supervision and punishment, we must ideologically improve the safety awareness of employees.

4. Improve and perfect the system to ensure that comprehensive safety management work is well-organized and implemented. Strictly implement the responsibilities of all levels and departments in accordance with the safety responsibility system.

5. Carry out safety inspections and hidden danger inspections and management on a regular basis in accordance with the regulations of the project department in a timely manner, and do a good job in finding and rectifying safety hazards at the construction site.

In short, through this major inspection, some shortcomings and omissions in the safety work of the project department were discovered. The project department made timely rectifications and brought them under effective control, but safety work is a long-term task. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve the safety awareness of the majority of employees, enable various tasks and requirements of safety management to be better implemented, further enhance their awareness of safety responsibilities, and clarify their respective responsibilities. Responsibilities to provide safety guarantee for the smooth progress of project construction.