Resumption of work safety self-inspection report

Resumption of work safety self-examination report

In our daily life and work, we all inevitably have to come into contact with reports. When we write reports, we must avoid being too long. I believe many people will find it difficult to write a report. The following is a return-to-work safety self-inspection report that I compiled for you. I hope it can help you.

Resumption of work safety self-inspection report 1

In order to ensure the smooth progress of the project construction after the project department resumes work in 20xx, in response to the needs of the project and the instructions of the headquarters and the general manager’s office, the project management department in 20xx From February 14th to February 15th, the report on the inspection of structural entities and internal data of this project completed before the year is as follows:

1. Construction site quality and actual measurement conditions (see the attachment for details of the inspection results)

In addition, the following problems were found during the on-site inspection:

1. The side of the stairs in the comprehensive building was deformed;

2. The front of the staff dormitory building There is a large deviation in the verticality of the first-floor columns and second-floor decorative columns, and a large deviation in the flatness of the bottom surface of the beam;

3. The steel bars of the leaking columns in the canteen are corroded;

4. The D-axis formwork support system of the power distribution-water pump room needs to be re-installed;

5. The waterproof exposed parts of the power distribution-water pump room have curling edges in some places.

Based on the above situation, the project department organized each subcontracting team to rectify the above problems. It is expected that the rectification of the above problems will be completed before February 20 to prevent the smooth progress of the resumption of work after the year.

2. Inspection of internal industry data

According to project needs and instructions from the headquarters and the general manager’s office, the project department will prepare construction plans for masonry projects and decoration projects after the year, and Complete the compilation, review and submission of the plan before the start of the masonry and decoration projects (expected to be before February 25).

3. Measures to be taken after the resumption of work

1. Strengthen the learning and training of management personnel

The project department will organize study and assessment of the drawing content and decoration projects from time to time Training and learning improve the overall quality management efficiency of the project by improving the professional level of managers.

2. Strengthen communication with the construction unit

In response to drawing issues, do a good job in document transfer with the construction unit to avoid unnecessary risks.

3. In-depth implementation of the three-inspection system

This year, the project department should strengthen supervision of the implementation of self-inspections by subcontracting units. At the same time, strengthen the management process to ensure the implementation of the three-inspection system. , and penalties will be increased for subcontracting units that fail to comply with the requirements of the project department. At the same time, each work area must do a good job in implementing the responsibilities for quality inspection, and conduct inspections of hidden acceptance, key node construction, etc. in advance to minimize quality problems. Inspection and acceptance work caused progress to lag.

4. Strengthen process management

This year’s construction content has a high visual quality. Once rework occurs, color difference, repair marks, and material loss caused by rework will inevitably occur. Therefore, the project Department managers must do a good job in quality supervision during the construction process to ensure that quality hazards are eliminated in the bud.

5. Implement quality assessment

In the new year, the project department will conduct inspections of each branch based on the inspections of the general director’s office, inspections of construction units, and inspections of the project department in view of the particularity of this year’s work content. Comprehensive evaluation will be conducted on the construction contents of the contractor, and the good ones will be rewarded and the bad ones will be punished. For subcontractors who repeatedly fail to meet requirements or disobey management, in addition to being fined and ordered to make rectifications, a letter will be sent to the leader of the subcontractor company regarding the subcontractor's situation at the construction site and reported to the company. It is recommended that the subcontractor be included in the blacklist List.

6. Adhere to sample guidance

Before the masonry construction and decoration construction, the project department will prepare material samples and send them to the supervisor and construction unit for review. After passing the review, they will be put into use. Avoid unnecessary losses; at the same time, prepare on-site physical samples for masonry, plastering, brick adhering and other processes. Large-scale construction can only begin after the samples are accepted by the project department, supervision department, and construction unit headquarters.

7. Do a good job in relevant records and document delivery work, and prepare a self-inspection report on resumption of work safety 2

According to the spirit of the Liping County Construction Project Safety Supervision Station and the documents issued, after the Spring Festival, our construction unit A comprehensive safety self-inspection was conducted on the construction site, and the safety hazards and defects existing in the self-inspection were comprehensively summarized and rectified. The content is as follows:

1. Inspection status

1. Supervise the special staff to work with certificates, and provide professional training on the use and management of vertical transportation machinery to ensure safety during construction operations.

2. When the amount of construction work in terms of construction machinery and tools is large and the risks are high, our management team promptly monitors the construction machinery and tools throughout the day to check whether the machinery is operating normally and whether the safety devices are reliable, etc. A comprehensive inspection was conducted to eliminate safety hazards.

3. Regarding temporary electricity use at the construction site: The builder and supervision unit visited the site to inspect and guide the work, issued rectification opinions and put forward requirements. Our project department promptly rectified the hidden dangers and met the on-site temporary power consumption specifications.

4. Our project department organized a scaffolding team to inspect the "four entrances" of the construction site, and comprehensively rectified the safety nets and scaffoldings that were not tightly enclosed and not firmly erected, which greatly reduced the cost. Potential safety hazards ensure the safety of construction workers.

5. Equip sandboxes, fire-extinguishing water tanks, etc. around dangerous sources to prevent insufficient or inadequate facilities.

6. The project department established a safety inspection team. Under the leadership of the project manager and full-time safety officers, a large-scale safety construction meeting was held on the on-site construction layout, which disseminated the safety responsibility system of each position and conducted mutual discussions. Communicate and discuss and inspect the site.

7. Conduct three-level safety education for personnel entering the site after the year:

First-level education:

1. The party and the country’s production safety guidelines and policies .

2. Safety production regulations, standards and legal concepts.

3. The unit’s construction process, safety production system, and safety disciplines.

4. The unit’s production safety situation, major accidents that occurred in history, and the lessons that should be learned.

5. How to rescue the injured, eliminate dangers, protect the scene and report in a timely manner after an accident.

Secondary education:

1. Construction site safety systems, regulations and safety precautions;

2. Civilized construction site standards;

3. Construction site environment and possible unsafe factors;

4. Project construction characteristics and basic knowledge of construction safety;

5. Safety technical operating procedures for this type of work;

p>

6. Basic knowledge of working at heights, mechanical equipment, and electrical safety;

7. Basic knowledge of distribution standards and use of protective equipment.

8. Knowledge of emergency safety handling and safety inspection and evacuation

Third-level education:

1. Labor discipline and safety production and civilized construction requirements of this team;

2. The working environment, operating characteristics and hazard sources of this team;

3. Safety technical operating procedures and basic safety knowledge for this type of work;

4. The correct use and safety protection requirements of mechanical equipment, electrical equipment and construction tools involved in the type of work;

5. Safety production knowledge in adopting new technologies, new processes, new equipment and new materials;

6. Occupational health requirements for this type of work and the main functions, correct wearing and use methods of labor protection equipment;

7. Rescue, troubleshooting, rescuing the injured, and protecting the site of accidents prone to occur during the construction process of this team and timely reporting and other emergency measures to resume work safety self-inspection report 3

According to the second phase work plan of Weixin County Coal Mine’s “100-day Safety and Zero Deaths” and the requirements of Weimeitong [20xx] No. 88 document, our mine The mine was organized by the mine director on September 28, 20xx, and the mine safety supervisors participated, and the mine conducted safety hazard inspection, management, rectification, and self-inspection and acceptance. The self-inspection and acceptance status is now reported as follows:

In order to conduct a comprehensive and detailed inspection of hidden dangers in all underground locations, after the underground inspection is completed, the ground and software data will be uniformly inspected, and our mine has established a self-inspection and acceptance team. .

1. Self-inspection and acceptance team:

Team leader: Chen Huaicang (owner)

Deputy team leader: Yuan Defeng (mine director)

Members: Peng Xiaoqing (Engineer), Wan Chaokun (Deputy Mine Director of Production), Zhang Dali (Deputy Mine Director of Safety), Liu Jiangang (Deputy Mine Director of Mechanical and Electrical), Wei Xing, Chen Xueyun (Resident

Mine Safety Supervisor), Luo Yunqing, Luo Bin, Chen Renbo, Luo Bangxiong (technician)

Inspection route: ground - main cave - floor transport rock tunnel - refuge cave - floor transport rock gate - roof transport rock tunnel - Mechanical and electrical chamber - Coal transportation alley - No. 6 going up the mountain - No. 5 going up the mountain - No. 4 going up the mountain - Material lifting up the mountain - Return air coal lane - Floor return air three stone gate - Floor return air rock lane - Ground.

After the self-inspection and acceptance team came out of the well, they conducted inspections of the entire mine’s ground fan distribution room, main fan, fire pool, power distribution room, air compressor, gas pumping room, and all software data of the entire mine. Comprehensive

2. Legality

1. Complete certificates and licenses. The coal mine’s “five certificates and one license” and the certificates held by management personnel, special operations personnel and workers are complete and valid.

2. The mines are legal and valid

3. Safety

1. The organization is sound and the responsibilities are clear. The mine is equipped with a mine manager and a production mine manager. One, a safety mine manager, one electromechanical mine manager, there are four professional and technical personnel, including mine safety management department, production technology department, roof, ventilation, electromechanical, transportation, drainage outburst prevention, and monitoring Responsible group, the personnel of each responsible group are in place.

2. Employee safety training:

Before resuming work, the mine conducted safety training for all employees for 72 hours. A training plan, training materials, records, and Examinations were taken, files were established, and self-rescuer training was conducted for all personnel who went down the mine. All personnel who went down the mine mastered the knowledge of underground disaster avoidance and lines, and the signs of coal and gas outbursts.

3. Ventilation system:

The mine ventilation system is reasonable. The main ventilator is installed on the ground, and there is a set of main ventilators of the same capacity as backup. There is no local ventilator to replace the main ventilator. The mine has a wind measurement station and a wind measurement management system. The wind surveyor has conducted a comprehensive wind measurement. The air volume in the mine is sufficient. There is no breeze or windless phenomenon. There is no series ventilation phenomenon. The mine is equipped with sufficient self-rescuer.

4. Mine gas extraction and monitoring systems are operating normally.

5. Production system:

The coal mining working face of the mine has two smooth safety exits, the tunnel has reliable support, the cross-section meets the design requirements, and various safety signs underground Complete, the coal lane has been closed, and there is no mining beyond the scope.

6. Transportation system:

Main streets and transportation lanes are laid with rails, and there is no explosion phenomenon in electric locomotives.

7. Power supply system.

Mines should use dual-circuit power supply, and those without dual-circuit power supply systems should have self-prepared power supplies with sufficient capacity. Underground electrical appliances must have grounding, overcurrent, and leakage protection devices. It is strictly prohibited to directly supply power underground from a transformer that is directly grounded from the neutral point on the ground. Mining products used underground must have a "product certificate" and an "explosion-proof certificate." Therefore, the electromechanical transportation equipment is in good condition, the cables are hung neatly, there is no loss of explosion, and the operation is normal.

8. Communication system.

The mine must establish a complete communication system. Communication inside and outside the mine and up and down the mine must be smooth. Underground explosion-proof telephones must be installed in each main underground chamber and mining face.

9. Drainage system.

The mine must have an independent and reasonable drainage system. Ditches should be built in the main tunnels that drain water by gravity. Mines with water hazards should be equipped with water exploration and drainage equipment and prevention and drainage equipment in accordance with regulations. At the same time, water prevention and control mechanisms should be established and a professional team of water control and control should be established.

10. Technical management.

The mine has an mining layout plan that has been approved by the county coal department, and drawings reflecting the actual situation (mining project plan, ventilation system diagram, and top-down comparison diagram) are drawn up and exchanged in a timely manner as required. Operation procedures must be prepared before starting work on the mining face. Prepare targeted emergency plans for mine accidents.

11. The gas inspection, management and daily review system is improved.

The mine must be equipped with 12 gas inspectors, more than 4 gas monitoring personnel and more than 3 optical gas detection instruments, and each team leader and management staff have a portable gas alarm instrument. The gas monitoring system is operating normally, and the probes are calibrated on time and in complete quantity.

12. Labor quota management.

Our mine has strengthened labor quota management and strictly controlled the number of people entering the mine. The maximum number of people entering the mine in each shift shall not exceed 9 people.

4. Attached Safety Hazard Inspection and Acceptance Form Resumption Safety Self-Inspection Report 4

In order to further strengthen and improve the safety work of the project department, effectively ensure the safe production work when resuming work after the holiday, and ensure the normality of the project According to the construction order, combined with the actual situation of the project department, the safety work of the construction site was carefully and carefully inspected before the start of construction, and hidden danger inspection and management activities were carried out on the construction site. The self-inspection and rectification situation is summarized as follows:

1. On-site construction safety conditions

1. Worker safety education and edge protection inspection before the start of construction

Make all preparations and wait for workers to return to the site for timely third-level education. Improve workers’ awareness of construction safety after the holiday.

Now the foundation pit protection at the construction site is in place safely. There are no cracks or subsidence in the upper ground of the foundation pit. The protective railings around the pit are in place safely and neatly, and safety warning signs are hung in accordance with regulations.

2. Safe use of electricity

At the construction site, "one machine, one gate, and one leak" for electrical equipment ensures the safety of electricity; warning signs are placed on power supply equipment. . The primary and secondary distribution boxes are neatly in place, the protective accessories are in place, the metal distribution box shell protects the neutral line intact; the leakage protection device is intact, the distribution box is clearly marked, and the distribution lines are in the correct direction.

3. Safety measures for working at heights.

(1) Safety regulations and measures for high-altitude operations are complete.

(2) Warning signs for high-altitude operations are complete.

(3) Scaffolding and safety net protection facilities are complete and undamaged.

4. Special equipment (including lifting equipment)

(1) The appearance of the metal structure and working mechanism of the tower crane is normal; all safety devices and all indicating instruments are complete and intact; The connecting bolts of the main parts are not loose, the wire ropes are not worn, and the winding of each pulley is in compliance with the regulations; the power supply cable is not damaged. The limit device is in place and fully functional. The tower crane safety warning signs are eye-catching and the tower crane usage management system is in place. It has been inspected and accepted by the project department.

(2) There is no deformation of the structure of each part of the construction elevator, and no loosening of the connecting bolts; the rack and gear, the guide wheel and the guide rail are connected normally; the wire ropes of each part are well fixed and have no abnormal wear; there are no obstacles within the operating range.

5. Scaffolding construction

The erection and disassembly of scaffolding shall be carried out in strict accordance with the "Interim Regulations on the Management of Attached Lifting Scaffolds for Construction" and the "Organizational Design of Climbing Frame Construction". The bolt connectors on the frame, Lifting power equipment, anti-falling devices, anti-falling devices, electronic control equipment, etc. are all intact and intact. The fasteners used in the scaffolding are all qualified and have no damage, the steel pipes used have no cracks or twists, all bolts and nuts are tightened in place, and the supports are stable. The scaffolding boards on the working floor are laid in good condition, the joint boards are tightly sealed in accordance with the requirements of the regulations, the protection is in place, and the warning and safety signs are in place.

6. Fire management

(1) Fire extinguishing equipment and fire-fighting facilities are equipped in construction areas and other power distribution facilities, mechanical vehicles, warehouses, etc., and fire extinguishers work normally and have good performance. The warehouse is classified and stored. The circuits in the warehouse are running normally, and there are no random connections of wires or electrical appliances. (2) The storage of oxygen and acetylene complies with safety regulations.

7. Safety protection facilities: Protective facilities and obvious warning signs are set up at cave entrances and dangerous locations; safety protection railings are set up on air surfaces; fire-fighting facilities are installed near electrical parts and flammable materials. wait.

2. Problems in the inspection

1. The layout of construction power lines is messy and needs further regulation.

2. Regular inspection of equipment, various The system is perfect; however, the equipment’s own inspection data and records are incomplete; further improvement is needed.

3. Some safety protection facilities failed to keep up with the construction progress due to cross-process operations, resulting in safety protection lagging behind during construction.

3. Rectification measures taken:

In order to ensure the safety of project construction and eliminate various safety hazards, the project department proposed the following rectification measures for the main problems existing during the self-inspection process:

1. We will continue to pay attention to the issue of electricity consumption in construction, strictly investigate the illegal use of electricity in employee dormitories, and conduct unified and standardized layout of on-site wiring.

2. Sound and improve the system to promote comprehensive safety management work to be followed and implemented in place. Strictly implement the responsibilities of all levels and departments in accordance with the safety responsibility system.

In short, some shortcomings and omissions were discovered through this inspection. The project department needs to make timely rectifications to ensure effective control and ensure the safe start of the project after the holidays. But safety work is a long-term job. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve the safety awareness of the majority of employees, enable various tasks and requirements of safety management to be better implemented, further enhance their awareness of safety responsibilities, and clarify their respective responsibilities. Responsibilities to provide safety guarantee for the smooth progress of project construction.