Method for make folding basket for Mid-Autumn festival

The manufacturing method of the Mid-Autumn Festival folding basket is as follows:

1, Step 1: Prepare 1 red cardboard and a yellow cardboard, which is thinner than the red one, a pair of scissors and glue.

2. Step 2: Cut the red cardboard into a square with a side length of 15cm, and then cut out two slender strips with a width of about 7 mm ..

Step 3: Cut the square into two rectangles, one of which is about 2cm wider than the other.

4. Step 4: Fold the big rectangle in half and cut it every 7mm along the folded edge. Don't cut it to the bottom, leave the edge 5 mm. In order to cut neatly, you can draw a line on the edge and cut it to the edge of the line.

5. Step 5: Cut and spread, and glue the two sides to the two sides of the small rectangle respectively. Cut off the last edge of the small piece of paper so that the two sides can be pasted together.

6. Step 6: After pasting the edges, align the two sides of the rectangle, and tidy up the pasted edges, and the middle part of the lantern will be fine.

7. Step 7: Cut the yellow cardboard into two strips about 3mm and stick them on both ends of the lantern as decoration.

8. Step 8: Stick one of the two slender red cardboard on the lantern as a handle, and cut a small hole in the middle of the other one, leaving a length about 1cm longer than the diameter of the bottom of the lantern.

9. Step 9: Fold the yellow cardboard into several layers, cut out the ear shape and pass through the small holes of the red cardboard. When you wear it, roll the upper end of your ear slightly to make it easy to pass through.

10, Step 10: Finally, stick red cardboard with ears on the bottom of the lantern as the ears of the lantern to decorate the lantern, and a red lantern made of cardboard is finished. When making the middle part of the lantern, if the cardboard is not folded, you can cut the paper open with a knife, so that the lantern will not have creases and look better.