Maintain safety training content

First, keep in mind that "everyone is responsible for safety in production", establish the idea of "safety first, prevention first, comprehensive management", actively participate in safety activities, strictly abide by rules and regulations and discipline, do not violate labor discipline, stick to their posts, stay away from work after drinking, and concentrate on safety in production.

Second, seriously study the operating rules of mechanical maintenance safety technology, be familiar with safety knowledge, strictly implement safety rules and regulations and measures, do not operate illegally, do not take risks recklessly, and have the right to refuse illegal orders.

Third, the repair machinery should be parked in a flat and solid place, supported firmly and wedged tightly; When using the jack, it must be fixed with a bracket. Do not operate under a moving vehicle. It is forbidden to work or check under the car or stand in front of the car in the aerial test.

Four, maintenance of toxic and flammable containers or equipment, should be strictly clean, after inspection, open the air channel, before operation. The operation in the container must be well ventilated and supervised outside.

Five, pay attention to the work to regularly check whether the tools are damaged, gloves are not allowed to be worn when playing a sledgehammer, and no one is allowed to swing the sledgehammer.

Six, the maintenance of machinery should be "maintenance, it is forbidden to start" warning signs, non maintenance personnel are not allowed to start or turn.

Seven, cleaning oil, lubricating oil and waste grease, must be stored in the designated place. Waste oil and cotton yarn are not allowed to be thrown about.

Eight, when repairing electrical equipment, to cut off the power supply, and lock the switch box, hanging "someone maintenance, prohibit closing" warning signs, and hold people accountable, before repair.

Nine, many people operate the workbench, there should be a protective net in the middle, and the opposite line of defense should be staggered during operation.

(a), personal safety ten prohibitions:

1, safety education and post technical examination are unqualified, and independent operation is strictly prohibited.

2. Those who don't dress as required or drink before work are strictly prohibited from entering the production post and construction site.

3, don't wear a helmet, it is forbidden to enter the production device and maintenance, construction site.

4, did not handle the safety operation ticket and don't wear a seat belt, it is forbidden to work high above the ground.

5. It is forbidden to work in toxic, harmful and oxygen-deficient places such as towers, kettles, tanks and cable trenches without safety operation tickets.

6. Without a maintenance working ticket, it is forbidden to dismantle the pipes, pumps and other equipment connected to the system.

7. Electrical construction is strictly prohibited without "three votes" for electrical operation.

8, did not deal with the construction working ticket, it is forbidden to break ground construction.

9, mobile equipment or pressure vessel safety accessories, protective device is not complete, it is strictly prohibited to start using.

10, rotating parts of mobile equipment, it is strictly prohibited to scrub or remove during operation.

(2), fire and explosion-proof ten prohibitions:

1. Smoking and carrying kindling and inflammable, explosive, toxic and corrosive articles into the factory are strictly prohibited.

2. It is strictly forbidden to use fire for construction or life in the factory without going through the formalities of using fire according to regulations.

3. It is forbidden to wear clothes that are easy to generate static electricity and work in the explosion-proof area.

4, it is forbidden to wear shoes with nails into the explosion-proof area and inflammable and explosive devices.

5. It is forbidden to scrub equipment, clothes, tools and the ground with gasoline and volatile solvents.

6. Unauthorized motor vehicles are strictly prohibited from entering production devices, tank farms and inflammable and explosive areas.

7. It is strictly prohibited to discharge inflammable and explosive articles and dangerous chemicals on site.

8, it is strictly prohibited in the explosion-proof area with black metal or spark-prone tools to knock, impact and homework.

9. It is forbidden to block fire exits and misappropriate or damage fire control facilities at will.

10, it is forbidden to damage various explosion-proof facilities in the factory.

(3), to prevent poisoning suffocation ten provisions:

1. Personnel who are engaged in toxic operations and are in danger of suffocation must be educated on anti-virus first aid safety knowledge.

2, the working environment (equipment, containers, underground, gutter, etc. ) oxygen content must reach more than 20%, the concentration of toxic substances in line with state regulations, before work.

3, when working in a toxic place, must wear protective equipment, must be supervised.

4. When working in equipment with oxygen deficiency or toxic gas, the pipeline connected with it shall be isolated by blind plate.

5, in the post of toxic or choking danger, to develop rescue measures and set up the corresponding protective equipment.

6, the concentration of harmful substances in toxic and harmful places, to regular testing, to meet national standards.

7, for all kinds of toxic substances and gas appliances must have personnel management, and regular inspection.

8, involving and monitoring of toxic substances equipment and instruments should be regularly checked and kept in good condition.

9, poisoning, suffocation, treatment and rescue should be timely and correct.

10, improve the management system of toxic and harmful substances and strictly implement it. Workplaces that fail to meet the prescribed hygiene standards for a long time should stop working.

(4), anti-static hazard ten provisions:

1, transport flammable and explosive substances in strict accordance with the specified flow, and do not mix and stir with compressed air.

2. Flammable and explosive liquids should be kept still for a certain period of time after stopping transportation, and then scale, temperature measurement and sampling can be carried out.

3. Two or more materials are not allowed to be used for temperature measurement and sampling of flammable and explosive fluid storage tanks.

4. It is forbidden to collect oil from the upper part of the oil tank. The tank car should be filled with crane pipe liquid, and it is forbidden to refuel in the device or tank farm.

5. It is forbidden to wear clothes that are easy to generate static electricity into flammable and explosive areas, especially not to take off clothes or wipe equipment with chemical fiber fabrics in this area.

6, easy to produce chemical fiber and powder electrostatic environment, its temperature must be controlled within the prescribed temperature limit.

7. For chemical fiber, powder and other equipment prone to static electricity, anti-static grounding must be carried out: the conductivity of concrete floor and rubber floor should meet the requirements.

8. For the transportation and packaging of chemical fiber and powdery materials, measures must be taken to eliminate or release static electricity: for devices and equipment that are prone to generate static electricity, static eliminators must be equipped.

9, anti-static measures and equipment, to designate a person to check regularly and build card registration file.

10. When new products, equipment, processes and raw materials are put into use, it is necessary to evaluate the static electricity situation and take corresponding measures to eliminate static electricity.

(5), maintenance site ten prohibitions:

1. People who don't wear safety helmet or work clothes are forbidden to enter the site.

2. People wearing sandals and high heels are forbidden to enter the site.

3. Before going to work, drinkers are forbidden to enter the site for operation.

4, it is strictly prohibited to play in the homework or do interfere with homework.

5. No smoking at the maintenance site.

6, it is forbidden to use gasoline, solvent scrubbing equipment, tools, clothing.

7, it is forbidden to leak oil, dangerous goods, calcium carbide waste residue, etc.

8, it is forbidden to block the fire escape.

9. It is forbidden to misappropriate or damage fire fighting tools and equipment.

10, private use of field equipment is prohibited.

(6), maintenance site five must abide by:

1, the shutdown maintenance system must be observed.

2, must abide by the system of entering the equipment operation.

3, must abide by the fire management system.

4, must abide by the maintenance site safety management regulations.

5, must abide by the scientific and civilized maintenance system.

(6) What rights and obligations do workers have in terms of labor safety and health?

According to the relevant provisions of the Labor Law, the rights and obligations of employees in labor safety and health mainly include the following aspects:

There are five aspects of rights:

1. Employees have the right to know the possible health hazards and possible accidents caused by their work. Employers have the obligation to make employees aware of the health hazards that may be caused by engaging in this work, and have the responsibility to provide employees with occupational safety and health training suitable for their work.

2. Employees have the right to obtain working conditions and labor protection articles to ensure their health and safety, and the employer has the responsibility to improve the working conditions of employees and distribute labor protection articles that meet the safety and health requirements.

3. Laborers have the right to refuse the illegal command of the management personnel of the employer and force them to take risks. The employer shall not punish employees or dismiss employees for refusing the management personnel of the employer to command risky operations in violation of regulations.

4. Employees have the right to criticize, report and accuse behaviors that endanger life safety and health. Employers and relevant departments must take active measures to eliminate the state and behavior that endanger the health and safety of employees, and may not take revenge on employees.

5. In the event of an emergency that seriously endangers the life and safety of employees, employees have the right to take necessary emergency measures, and shall report relevant information to the management personnel of the employer. The employing unit shall not punish its employees for taking emergency measures, nor shall it withhold their wages and bonuses.

There are four aspects that must bear corresponding obligations:

1, employees must strictly abide by the safety operation procedures and the rules and regulations of the employer in the process of labor.

2. Employees must use all kinds of labor protection articles correctly according to regulations. In the process of labor, not wearing and using labor protection articles according to regulations often leads to casualties.

3, in the process of labor, employees have the obligation to obey the production command of the employer's management personnel, and shall not act at will.

4. When employees find unsafe factors or dangerous situations that endanger health and safety in the process of labor, they have the obligation to report to the management.