What are the precautions for using the water dispenser for the first time?

Precautions for first-time use of drinking fountains:

1. No matter what type of water dispenser you use, you must buy a water dispenser with a leakage protection switch when you buy it, and connect a solid and reliable bottom line when you use it, so that even if there is leakage, your personal safety will be guaranteed.

2. When using the drinking machine for the first time, you must supply water first, and both faucets can not be electrified until water flows out. It is strictly forbidden to connect the drinking machine to the power supply without water. When there is no water in the water dispenser, the power supply of the water dispenser must be turned off to avoid dry burning and damage to parts.

3. For the compressor-type refrigerating water dispenser, it should move vertically, and if it is inclined, the inclination angle should not be greater than 45 degrees. When in use, it takes 3-5 seconds to start again after the refrigeration power supply is turned off. When the indoor temperature is lower than 10 degrees, turn off the cooling power supply.

4. Uni-President Bian Xiao reminds you not to use too much force when pressing the faucet to receive water, as the parts will come off or be damaged when turning by hand.

5, don't put the metal bar in the ventilation window, so as not to damage the fan or cause electric shock; Do not cover the fan ventilation window, so as not to damage the semiconductor refrigeration element due to poor ventilation and heat dissipation.

Drinking fountains are used all the year round, and a lot of dust and dirt are accumulated on the surface of the machine, especially the fans and radiators, which will inevitably affect refrigeration, so they should be cleaned once a year. Uni-President International Furniture & Home Consultant reminds you that when you don't use the water dispenser for a long time, you should unplug it, drain the remaining water, wipe the water in the water tank with a towel, and clean the surface of the cabinet, then put it in a paper packaging box and store it in a ventilated and dry place.