Security team objective responsibility book?

Seriously implement the company's "safety first, prevention first; Risk control, overall management, peace, harmony and continuous improvement; Law-abiding and safe development ",I sorted it out for your reference.

Fan Wenyi

In order to implement the safety responsibility system, fully realize the safety production goal of our factory and ensure the safety implementation, we have signed a safety production responsibility form with the team.

I. Responsible object:

The team leader of each workshop is the first direct person in charge of the safety team's production and is responsible to the workshop director.

Second, the goal of responsibility;

1. Ensure that the managed execution equipment can perform stably for a long time within the range of qualified parameters.

2. Lead the whole class to strictly implement the "two votes and three systems".

3, put an end to serious injuries, deaths, minor injuries frequency control below 3‰, jointly and severally liable for accidents on duty.

4. Three-level safety education rate of new workers 100%.

5, special operations personnel certificate rate 100%.

6, actively carry out activities to create safety qualified team, to ensure the implementation of the annual safety qualified team.

7. Actively carry out pre-shift safety activities and pre-shift safety inspections, find hidden dangers and rectify them in time, so as not to command, operate or violate labor discipline.

Third, the team leader responsibilities:

1, take full responsibility for the safety production of this team. Organize hand-over meetings, strictly abide by safety production rules and regulations and safety operation procedures, reasonably arrange the work of team members, and lead them to work safely.

2, seriously implement the guidelines and policies of production safety; Conduct regular safety education for team members, organize team members to learn safety technical specifications, safety operation procedures and company safety production management rules and regulations, supervise team members to use personal labor protection articles correctly, and constantly improve their self-protection ability. Criticize, educate, report and punish team members who violate labor discipline, such as not wearing safety helmet or barefoot, bare back, wearing slippers, smoking, absenteeism, sleeping at work, etc.

3. Listen to the correct command of the workshop director. Workers who have not passed the "three-level safety education" or have no special operation certificate shall not be arranged to take up their posts. Strictly implement the process handover and inspection system; Have the right to refuse illegal command and not take risks in violation of regulations.

4. Before shift, conduct safety inspection on all machines, equipment, protective equipment and working environment, and take immediate measures to rectify any problems found.

5, have the right to refuse any instructions and opinions that do not conform to the safety in production, and report to the superior or leapfrog in time.

6. Organize safety group activities; Master the basic knowledge of on-site rescue and do a good job of pre-hospital rescue; Report the accident immediately and actively cooperate with the accident investigation team to investigate and analyze the accident, find out the reasons and prevent similar accidents from happening again.

7. Immediately report the accident to the workshop director, the operation department and the safety and environmental protection department; Protect the scene and participate in accident investigation. Special circumstances can be reported over the top.

*** 1***. The monitor has the right to stop the work of people who wear personal protective equipment incorrectly;

***2***. The monitor has the right to stop employees who violate the regulations and report to the superior in time;

***3***. Employees have the right to refuse to carry out anyone's serious illegal command and report to the leaders and relevant departments in time;

***4***. Have the right to put forward opinions and suggestions on the job site with serious environmental pollution and possible accidents.

Fan wener

Party A: * * * Jinjie Sub-branch * * *

Party B: * * Team * * *

In order to seriously implement the company's "safety first, prevention first; Risk control, overall management, peace, harmony and continuous improvement; Abide by the rules, abide by the law and develop safely ",establish the concept of" safety in production, everyone is responsible ",ensure the personal safety of employees and the property safety of enterprises, and effectively ensure the stable and healthy development of enterprises. The 20 1 year safety production target responsibility book is specially formulated.

1, control index

* * *1* * The number of safety accidents is ≤0.5;

***2*** Put an end to casualties;

2, work objectives and responsibilities

*** 1*** Improve and implement the responsibility system for production safety, and clarify the responsibilities of the team members.

***2*** Improve the safety production management system and operating procedures, strengthen the implementation of the safety production management system, and produce according to the operating procedures. Violation of rules and regulations is strictly prohibited.

***3*** Carry out publicity, education and training on production safety. Do a good job of safety education for new employees before they take up their posts, and the employee safety education rate is100%;

* * * 4 * * Actively carry out publicity and education on workers' safety production, and publicize and improve workers' safety production awareness and safety technical knowledge by using publicity windows, large slogans and eye-catching signs.

* * * 5 * * Carry out normal production safety inspection, eliminate potential safety hazards in time, and the safety inspection efficiency is 100%. According to the requirements of the company and the branch factory, make records of safety inspection and hidden dangers elimination.

***6*** Provide professional safety training for special operators according to regulations, and the certificate-holding rate reaches 100%.

***7*** Configure fire-fighting equipment according to regulations, and manage it by special personnel and check it regularly. Workers should correctly master the fire extinguishing equipment, and the utilization rate of fire extinguishers is100%; Electricians should always overhaul electrical equipment and lines; Dangerous goods should be located and stored, and managed in strict accordance with regulations; Check the production equipment frequently, and repair it in time when faults are found. Immediately report defective facilities and equipment to the facilities and equipment management department and the safety production management department, and stop production at the same time. The intact rate of safety facilities and equipment is 100%.

* * * 8 * * Employees should wear labor protection articles and occupational hazard protection articles correctly at work. It is forbidden to wear slippers, barefoot and shirtless at work. They should stick to their posts and are not allowed to leave their posts without authorization.

3, rewards and punishments

If the control indicators of *** 1*** are not completed and the work objectives are not put in place, Party A will punish Party B according to regulations.

***2*** Party A completes the control indicators, implements the work objectives, and rewards Party B according to regulations.

***3*** Attached are the post safety operation procedures of this group.

Signature of Party A's Representative * * *: Signature of Party B * * * * *:

Date of signing: 20 1 date of signing: 20 1.

Fan Wensan

According to the requirements of oil production plants for safety in production, in order to implement the new safety production law and environmental protection law, combined with the policy of "safety first, prevention first and comprehensive treatment", establish the safety concept of "all accidents can be avoided", strengthen the red line consciousness and bottom line thinking, implement the responsibilities in safety production, and ensure that the personal safety of employees is not endangered in production activities; Ensure the safe and stable operation of the equipment; This responsibility book is specially formulated.

Guidelines and principles

1, unswervingly implement the policy of "safety first, prevention first and comprehensive treatment" and establish the safety concept of "all accidents can be avoided".

2. According to the characteristics of production in this workshop, adhere to the basic principles of "personal protection, equipment protection and power grid protection" and make them concrete.

3, rely on perfect system, sound organization, practical measures and high-quality staff to effectively implement our policies and guidelines.

We firmly believe that all accidents should be prevented through our efforts except irresistible natural disasters; Any hidden danger can be controlled.

Security goal

Put an end to production deaths, no production safety, fire, environmental pollution accidents, no major traffic accidents, and the serious injury accident rate is ≤0.8‰.

Standardize the implementation of HSE and safety production standardization system to achieve organic integration.

3. There is no fire that constitutes a secondary obstacle;

4. No personal injury;

scope of responsibility

Fully responsible for the realization of the production objectives of the security team;

Take full responsibility for the personal safety of the employees of this team in power production;

Be fully responsible for the stable implementation of the equipment under the jurisdiction of the team.

Complete the collection, arrangement and filling of various records and drawings of the team, and constantly improve them;

Institutional guarantee

1, to ensure the implementation of the new Safety Production Law and the new Environmental Protection Law within the scope of responsibility;

2, in accordance with the laws, standards, procedures and various rules and regulations formulated by the workshop, combined with the actual situation, formulate the operability safety management system suitable for this electrician class and the measures to prevent all kinds of unsafe situations;

3, each team give full play to the role of safety assurance system and safety supervision system, to ensure the implementation of the system in the organization;

4. Pay attention to the training of employees, ensure that employees master the required production skills, safety knowledge and regulatory requirements, and cultivate a rigorous work style.

supplementary terms

1, rewards and punishments shall be implemented according to the terms of the responsibility book for safety production objectives signed by the oil production plant and the workshop;

This Responsibility Letter shall come into effect after being signed by both parties, and the execution period is 20 15 1 0.

20 15 12 3 1;

This responsibility book is made in duplicate, one for each party.

Electrician class in power supply workshop

Director * * * Signature * *: electrician monitor * * * Signature * * *:

2065438+2065438+2005 I guess you like it.