Fire safety signs setting specification

1, fire safety signs should be located in an eye-catching position related to fire safety. There shall be no obstacles in front of or near the sign that hinder public reading.

2. Unless necessary, signs should not be set on movable objects such as doors, windows and shelves. , and should not be set on objects that are often blocked by other objects; This place.

3. When setting up the fire safety signs, we should avoid the phenomenon of contradictory and repetitive signs. Try to put the necessary letters with the fewest symbols; Express clearly.

4. Directional auxiliary signs should be set in the channels where the public chooses the direction, and the shortest route to the target should be set.

5, set the fire safety signs, should make the observation angle of most observers close to 90.

6, under all relevant lighting, the color of the sign should remain unchanged.

7. In the evacuation passage, signs of "emergency exit" should be set on the walls at both sides and corners of the passage, and the upper edge of the sign should not exceed 1m from the ground. You can also set the sign directly on the ground and cover it with a non-combustible transparent and firm protective plate, as shown in Figure 3. The spacing between signs should not be greater than 20m, and the distance between the end of the bag-shaped walkway and the signs should not be greater than 10m.

8. At the exit of the evacuation passage, an "emergency exit" sign should be set on the edge of the door frame or the upper part of the door.

Extended data:

Safety evacuation sign:

1, evacuation signs should be set according to relevant national fire technical standards and specifications, and evacuation directions should be indicated by light evacuation signs and exit signs that meet the requirements of specifications.

2. Shopping malls, markets and public places of entertainment should add self-luminous or light-storing evacuation signs that can maintain visual continuity on the ground of evacuation walkways and main evacuation passages.

3. Warning signs such as "No Locking" and "No Blocking" should be set at the unit safety exit, evacuation stairs, evacuation walkways and fire lanes.

4, fire elevator should be set up on the exterior wall of the fire elevator, and should indicate the purpose of the fire elevator and matters needing attention.

5. Public gathering places, hotels, restaurants and other accommodation places should set up evacuation signs indoors, indicating the evacuation passages on floors, safety exits, indoor fire control facilities, etc.

Baidu Encyclopedia-fire safety signs