Equipment management and maintenance regulations?

A, safety protection facilities management regulations

1. Safety facilities on the construction site, including safety nets, manhole covers, guardrails, protective covers and various limit safety devices, must be complete and effective, and shall not be removed or moved without authorization. If it is really necessary to move due to construction, it shall be approved by the management personnel of the responsible department of the project department and the corresponding temporary safety facilities shall be taken before moving. In addition to setting up safety publicity signs, reflective signs should also be hung at dangerous parts on the construction site.

2. The safety management department of the project department shall regularly/irregularly inspect the safety protection facilities of the project department, and the inspection contents are as follows:

The construction team/section shall carry out construction operations according to the approved construction organization design and safety technical measures;

All kinds of safety facilities, such as scaffolding, tic-tac-toe frame, formwork, tower crane, safety net, limb, etc. , the protective device can be put into use only after it has been accepted by the competent department; In the process of use, regular inspection and maintenance should be carried out;

When it is confirmed that safety facilities and other protective devices are not needed after each construction operation is completed, they can be removed according to the specified scheme after approval, and a safety officer will be assigned for supervision. If necessary, warning signs will be set up in dangerous areas.

3. In the process of inspection, if problems are found, the responsible department/personnel shall be immediately notified or ordered to make rectification.

Second, the construction site traffic management regulations

. 1. The roads in the field shall be maintained and kept smooth; The curvature and width of the road where heavy vehicles pass shall meet the requirements of relevant laws and regulations; Clear traffic signs should be set at sharp bends and steep slopes; On roads close to rivers and steep slopes, guardrails and obvious warning signs should be set up.

2, motor vehicle loading requirements meet the relevant national safety requirements.

3. "Go slow" signs should be set up at the entrance, crossing and narrow construction area, and special personnel should be assigned to direct traffic when necessary; If the facility/equipment is parked near the vehicle operation limit, a low-voltage red flash lamp shall be set at the lower edge;

4. The Machine Materials Department/General Department is responsible for the safety management of drivers and vehicles according to the scope of work responsibilities, and formulates vehicle safety management measures.

5, the driver is responsible for the daily inspection of the vehicle I drive, found the problem immediately, and make inspection records.

6. Handling of on-site traffic accidents:

If a traffic accident occurs in the stadium, it shall be implemented in accordance with the relevant requirements of the Management Regulations on Accident Handling of Changda Company.

Three, fire facilities safety management regulations

1. Configure fire-fighting facilities, equipment and equipment according to the requirements of relevant national regulations, set up fire safety signs, and organize regular inspection and maintenance to ensure that fire-fighting facilities are in good condition and effective.

2. Mark the storage location of fire control facilities, equipment and equipment, so that it can be found in time in case of fire.

3. Fire-fighting equipment should be placed in an obvious and easy-to-get place, and the fire-fighting equipment file, configuration type, quantity, setting position, inspection and maintenance unit (personnel), time for replacing chemicals should be registered, and the "Fire-fighting Equipment Registration Form" should be filled in.

4. No unit or individual may damage, misappropriate, dismantle or stop using fire control facilities and equipment, bury fire hydrants, occupy fire control spaces or block fire exits.

5. The fire-fighting equipment used must be managed and maintained by the General Department, and the distribution network diagram of fire-fighting equipment should be drawn. The fire fighting equipment used shall be managed and maintained by special personnel. Anti-freezing measures should be taken in winter, sun protection measures should be taken in summer, and whether the nozzle is blocked should be checked frequently.

6, dry powder fire extinguishers should be stored in the temperature between-10 ~ 45 degrees, check whether the pressure of the fire extinguisher is up to standard every year, if it exceeds the specified range, it should be replenished in time.

7. Fire hydrants, fire hoses and fire hoses are special fire-fighting equipment and shall not be used for other purposes. Always check whether the valves of fire hydrants are in good condition and keep them in good fire fighting condition.

8, the project comprehensive management department should conduct a comprehensive fire control facilities inspection every month.

Four, pressure vessels, dangerous chemicals safety management regulations

1 This regulation is formulated in order to conscientiously implement the National Regulations on Safety Management of Hazardous Chemicals, strengthen the safety management of pressure vessels and hazardous chemicals, and ensure the safety of pressure vessels and hazardous chemicals in the process of procurement, transportation, storage and use.

3. Mechanical ministry of materials and equipment of the Project Department is responsible for the specific control of the procurement, transportation, storage and use of pressure vessels and dangerous chemicals.

4. Types

Hazardous chemicals in the National Regulations on the Safety Management of Hazardous Chemicals refer to seven categories as explosives, compressed gas and liquefied gas, flammable liquid, flammable solid, spontaneous combustion and flammable substance when wet, oxidant and organic peroxide, toxic substance and corrosive substance in the National Standard GB 6944-86 Classification and Product Name Number of Dangerous Goods, while our project department currently uses compressed gas, liquefied gas and gasoline, diesel oil, oxygen and acetylene. According to the relevant provisions of the state.

Step 5 purchase

Mechanical ministry of materials and equipment of the Project Department must make a procurement plan according to the demand plan provided by the Engineering Department, and select suppliers with hazardous chemicals business licenses for procurement according to their specifications and quantity requirements. Products must have "three certificates and one vote".

Step 6 transport

Select appropriate loading and unloading tools according to the nature of hazardous chemicals; Select a supplier with a Transport License for Hazardous Chemicals; Handle with care, don't bump, don't throw, drag, fall and other rough handling, and the goods should be firmly fixed to prevent dumping and falling; It is forbidden to mix people and goods.

7. storage; stock

1), the storage of hazardous chemicals, it is necessary to establish the warehousing acceptance, warehousing acceptance, receiving and dispatching diary and three-level picking and warehousing registration system.

2), set up a special warehouse, should comply with the relevant safety and fire regulations. According to the types and properties of articles, set up "five prevention" warehouses with fire prevention, explosion prevention, heat protection, sun protection and moisture prevention; Hazardous chemicals with conflicting chemical properties or protection and fire extinguishing methods shall not be stored in the same warehouse or storage room. Acetylene bottles and oxygen bottles are not allowed to be stored together.

3) It is forbidden to import or export articles whose packaging and signs do not meet the national standards, or which are damaged, incomplete or deformed due to leakage.

4), warehouse management personnel must be qualified by the relevant safety knowledge training rear can mount guard, and regularly check the custody of the goods, find the changes of the goods in time, take safety measures in time.

4) No backlog is allowed in the warehouse. The distance between articles and beams, columns and roofs is not less than 0.3m, the distance between articles and walls and lamps is not less than 0.5m, the distance between articles is not less than 1m, and the distance between the bottoms is not less than 0.1m. ..

5) It is forbidden to operate with naked fire around the warehouse, and articles shall not be stored and exposed in the open air. Appropriate fire fighting equipment should be set up in the reservoir area to ensure adequate fire fighting water pressure. Fixed explosion-proof lighting should be installed in the warehouse, and mobile lighting should not be used for lighting.

6) The principle of "safety first, prevention first" should be implemented in the safety work of storage places, and the following points should be achieved:

(1) Insist on strengthening the leadership over the safety of hazardous chemicals;

(2) Insist on educating employees to do safety work consciously;

(3) Adhere to the strict implementation of the relevant laws and regulations of the superior and the operating rules and post safety responsibility system formulated by this enterprise;

(4) Insist on strict management of fire source and power supply;

(5) Insist on strengthening fire and explosion prevention in storage places;

(6) Adhere to the scientific management of hazardous chemicals storage;

(7) Adhere to regular safety inspection of stored items;

(8) Adhere to economic management;

(9) Insist on handling accidents according to the principle of "four pass".

The above are collected and sorted by Zhong Da Consulting Company.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd