Introduction of masonry method of sintered porous brick

Lead: Today, Bunny introduces the knowledge about sintered porous brick, which has a short history. In modern architecture, the choice of materials will become more and more scientific, and the strength of the building will become stronger and stronger. However, many people don't know the knowledge of sintered porous brick. In fact, the raw materials of sintered porous brick are particularly extensive, including coal gangue, shale, clay, silt and so on. Next, Bunny will explain the construction knowledge of sintered porous brick for you in detail.

Sintered brick wall:

1? The assembly method should be correct, the upper and lower seams should be staggered, and the lap joint should bite. Sintered bricks with severe corner loss should not be used.

2? Horizontal mortar joint should not be greater than 12mm, mortar should be full, straight and smooth, and vertical joints should be filled with mortar.

3? Sintered brick walls should be built with three-skin solid bricks on the ground or floor first, then under the beam or floor, obliquely squeezed with solid bricks and filled with mortar.

4? Sintered brick walls shall be provided with constructional columns, ring beams, lintels or cast-in-place concrete belts according to design requirements.

5? Various reserved holes, embedded parts, etc. , should be set according to the design requirements to avoid planing.

6? Both sides of the sintered brick wall door window frame are reinforced with concrete columns to fix the doors and windows.

7? Corners and junctions shall be laid at the same time, and shall not be straight or inclined. When stopping, the top of the wall should be level. At the corner, handover

, sintered brick and ordinary brick should be laid at the same time.

8? In the process of laying Latong line, build by laying bricks or stones, hang and lean to ensure that the wall is vertical and flat, and it is not allowed to smash bricks to repair the wall.

Construction in winter rain period:

1? Winter mortar should be mixed with ordinary portland cement, and sand should not contain frozen blocks.

2? Dust, frost and snow on the surface of sintered bricks should be removed, bricks should not be watered, and the consistency of mortar should be increased appropriately. ?

Guaranteed items:

1? The varieties, specifications and strength of sintered bricks must meet the design requirements, with factory certificate and test report.

2? Mortar varieties must meet the design requirements, and the strength must meet the following requirements

3? The horizontal mortar joint of sintered brick masonry is full and the vertical joint is dense.

4? If you are at the corner, do not go straight or tilt.

The above introduces the masonry method of sintered porous brick for everyone, and I believe everyone has a corresponding understanding of the construction technology of sintered porous brick. However, this construction method is not easy for everyone to see, but it is best to learn from professional workers and masters. Nowadays, with the diversification of construction methods, there are more and more types of building materials. It is recommended that friends who study related majors study more. It is best to know the performance and construction technology of each building material. The masonry method of sintered porous brick ends here.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~