Matters needing attention in workshop safety production

Question 1: General principles of safety management system in production workshop Article 1 In order to strengthen the company's safety production work and promote the company's all-round and healthy development, this system is formulated in accordance with the relevant national laws, regulations and policies on safety production and the actual situation of the company. Article 2 The company's safety production work must implement the policy of "safety first, prevention first" and implement the administrative leadership responsibility system. The person in charge of the company and the person in charge of each department should adhere to the principle of "safety must be controlled in production", and production should be subordinated to the needs of safety, so as to realize safe production and civilized production. Article 3 Departments and individuals that have made outstanding contributions to safety production shall be rewarded, and those responsible for accidents caused by violations of the safety production system and operating rules shall be severely dealt with. Those who violate the criminal law shall be handed over to judicial organs for handling. Article 4 This system is applicable to all production personnel, production managers and other personnel related to production. Article 5 The general manager is responsible for the implementation and supervision of this system. Article 6 This system shall come into effect as of the date of promulgation after being signed by the general manager. Fire safety management Article 1 All employees of the company shall enhance their awareness of fire control and fulfill their responsibilities and obligations for fire safety. Article 2 Anyone who finds a fire is obliged to call the fire brigade immediately (fire telephone number 1 19). Article 3 Fire control facilities shall be complete. Fire fighting equipment shall not be used for other purposes at will, and shall not be moved or damaged without authorization. Fire fighting equipment should be fixed in a convenient place, and the security department is responsible for the management, replacement and supplement. Check it once every quarter, replace the dry powder once every three years, and fill the rest according to the use state to keep it in good condition. Do a good job of cooling and keeping warm the fire-fighting equipment in time, and don't put it in a damp place. Article 4 sundries shall not be piled up around the special fire hydrant to prevent blocking the passage and ensure that it is available at any time. Article 5 The Human Resources Department shall conduct safety education and environmental protection training for new employees, so that employees can master the use of fire extinguishers and the treatment plan after use. New workers should have three-level fire education before taking up their posts, and those who fail are not allowed to take up their posts. Article 6. All departments should use the pre-shift meeting and regular meeting to strengthen the training of employees and improve their awareness of safety and environmental protection. Seventh clear tasks, implement the responsibility, step by step to sign a letter of responsibility for safety and fire prevention, in accordance with the principle of "who is in charge, who is responsible", truly implement the fire control work. Safety production management safety education system 1. Safety education regulations 1. New workers must have serious safety education in factories, workshops and on-site, and can only enter the operating post after passing the examination. 2. Workers engaged in special operations must receive special safety operation technical training, and can only operate with certificates after passing the examination. 3. Establish a pre-shift and post-shift education system and conduct safety education for employees on a regular basis. And pay attention to the cultural life of employees, and carry out various safety production publicity activities. 2. The main forms and methods of safety education 1. Three-level education: In all casualty accidents in industrial enterprises, the accident rate caused by new workers' lack of safety knowledge is generally around 50%, so it is necessary to carry out education at the factory level, workshop level and team level for workers who come to the factory for internship and transfer. A. Factory-level safety education: ① the nature of the factory and its main technological process; (2) China's guidelines, policies, regulations and management systems for production safety; (3) Rules and regulations of enterprise's labor safety and health, labor discipline and related accident cases; (4) particularly dangerous places and equipment in the factory and their safety measures; (5) new workers' responsibility system for production safety, etc. B. Workshop safety education: ① the production nature and main technological process of this workshop; ② Main measures to prevent industrial accidents and occupational diseases in this workshop; ③ Dangerous parts and precautions in this workshop; (4) General situation of production safety in this workshop and preventive measures; ⑤ Typical accident cases in this workshop; ⑥ The responsibility of new workers for safe production and the importance of observing rules and regulations. C. Education in security team: ① Work nature, technological process, general situation of safety production and scope of safety production responsibilities of workshops or teams; (2) The nature of production, responsibility system for production safety, safety operation rules and other relevant safety knowledge that the new workers will engage in, as well as the functions of various safety protection and safety devices; Specific requirements for safe production and civilized production in the workplace; (4) Workplaces, operating procedures and typical accident cases prone to industrial accidents; ⑤ Use and keep personal protective equipment correctly; ⑥ Emergency rescue and self-rescue after accidents often ... >>

Question 2: What are the safety production management in the workshop? 1, make good use of the time before and after the shift. At the meeting before and after work, safety precautions should be put forward according to the production tasks of the day, and workers should be required to take safety precautions seriously. Analyze the safety accidents that have happened in the enterprise or workshop, and analyze the risk factors of each process in the workshop, so that everyone can know their position in their hearts.

2. After the factory-level education, new employees should conscientiously do a good job in the "two-level education" in the workshop (workshop level and team level), so that new employees can have the concept of safe production from the beginning and improve their vigilance.

3, do a good job in the workshop safety publicity and education, through the distribution of safety education materials, organize the study of these materials and do blackboard newspaper and other forms of safety publicity and education for employees, using pictures and texts, two-pronged.

4. The workshop should carefully keep a safety diary, write down all safety-related matters such as workshop safety hazards, precautions, workers' attitude towards safety production, and make timely improvement and education to prevent the same mistakes.

5. Supervise the workers to operate in strict accordance with the operating procedures of process equipment, and fundamentally put an end to safety accidents. For some employees who violate the rules, educate them not to listen and severely punish or even dismiss them.

6. Supervise and educate workers to wear and use labor protection articles correctly. Labor protection articles are protective equipment to avoid or reduce accidental injuries and occupational hazards. The company has equipped each workshop with corresponding labor protection articles, but at work, many workers do not bring labor protection articles because they are inconvenient to work, which affects piece-rate wages. This concept is wrong. As the saying goes, "If you are not afraid of 10,000, you are afraid of one thousand."

Conduct on-site workshop safety production management basic knowledge education.

1, according to the specific situation of the workshop, carry out targeted on-site basic knowledge education and supervision on some key working procedures and key working procedures with more risk factors.

2, basic skills training, so that workers can achieve the most skilled level of this process. To ensure safe production at all times, it is not enough to have safety knowledge, but also to have superb technology and skilled movements. In the process of work, grasp a kind of "degree", fully understand the changes of equipment performance and environment, and avoid safety accidents.

3, small problems, big attention. Every safety accident or dangerous factor in the workshop, such as the burr on the edge of the workshop plate cuts the hand, the nail on the floor hurts the foot, and the * * * wire, seems to be a small problem, but it will bring many workers casual injuries and potential dangers to the workshop. Attention should be paid to the workshop, and on-site education should be given to workers in time, so as to completely eliminate potential safety hazards in the workshop and nip in the bud.

4, do a good job of fire safety in the workshop site. Educate employees how to use fire extinguishing tools, such as fire extinguishers and fire hydrants. In case of emergency, they will be in a hurry and cause greater losses. Strengthen assessment, clarify rewards and punishments, and improve the implementation of the responsibility system for production safety. Formulate and gradually improve the safety assessment system in the workshop, severely punish illegal operations and behaviors, and dismiss workers who have repeatedly suffered safety accidents or changed their working environment. Adhere to the principle of layer-by-layer assessment, the company assesses workshop directors, workshop directors assess team leaders, and team leaders assess employees. Reward if the assessment reaches the standard, or deduct points. In this way, the system clearly defines responsibilities, and safety is linked to interests, so that everyone attaches great importance to safety and is vigilant.

Workshop safety production management should strengthen the management of production equipment to ensure equipment safety.

Healthy equipment is the foundation of safe and civilized production. First of all, the workshop should make a good record of equipment operation according to the equipment situation of the workshop. For the faulty equipment, the personnel of the equipment department should be found immediately for maintenance to ensure that the equipment is in good condition at work. Second, the workshop must do a good job of daily maintenance of equipment, reduce the wear and tear of equipment, reduce the maintenance frequency of equipment, and improve the service life of equipment. Third, seriously abide by the regulations and requirements of equipment to ensure the safety of equipment and operators.

Workshop safety production management is a long-term and arduous work, and everyone is responsible. As the manager of the workshop, we must focus on the safety production management of the workshop, and we must not relax and be paralyzed at all. The safety of the workshop should be kept in a state of frequent alarm. As long as everyone pays attention to safety in production, standardizes their usual work behavior and forms good habits, * * * will create a corporate culture of civilized production ... >>

Question 3: What safety precautions should employees pay attention to in enterprise production?

"No rules, no Fiona Fang, no system, no organization", the workshop is the production site. In order to strengthen management and improve efficiency, the following provisions are formulated:

1. Team leaders and team leaders are managers at all levels arranged by the company, and all employees must work in place according to their arrangements. Orders must be followed, and prohibitions must be stopped.

2. During working hours, you should concentrate on your work, and you are not allowed to chat, make phone calls or do other things unrelated to production.

3. The night shift employees shall rest or have dinner in shifts at the specified time and place, and shall not eat or sleep in the workshop.

4, pay attention to personal hygiene gfd, work clothes, headdress and shoes, finger covers, nails, etc. Dress and arrange in strict accordance with the regulations.

5, the working environment should be clean and tidy, neatly placed. The above supplementary points, I hope everyone will earnestly implement and supervise each other.

Ten notes on safe production

One policy: safety first, prevention first. Two rules: job responsibilities; Safety regulations.

Three do not hurt: do not hurt yourself; Don't hurt others; Without getting hurt.

Four don't let go: the cause of the accident is unclear; The person responsible for the accident and the employees have not received education; The person responsible for the accident did not handle it properly; No preventive measures have been formulated.

5. Attention: Know the key parts of the unit's safety work; Understand the safety responsibility system and management network of this unit; Understand the safety operation rules and standards of the unit; Understand the hidden dangers of accidents and preventive measures of the unit; Understand and master the accident emergency plan.

Six invariants: adhere to the idea of "safety first"; The responsibilities of the legal representative of the enterprise as the first person responsible for production safety remain unchanged; Effective safety rules and regulations remain unchanged; Strictly strengthen safety production; The principle of one-vote veto in production safety remains unchanged; Safety production management measures that rely entirely on workers remain unchanged.

Seven checks: check and understand; Check the organization; Check the system; Check the ledger; Check the equipment; Check for hidden dangers; Inspection measures.

Eight combinations: establishing a combination of restraint mechanism and incentive mechanism; Highlight key points and give consideration to all aspects; Functional department management combined with * * * management; The combination of preventing micro-duration and highlighting the security system; Combine the promotion of safety culture with perseverance; Combination of safety inspection and hidden danger rectification; Combine the implementation of the responsibility system with the improvement of the accountability system; Strengthen safety management and implement safety production confirmation system.

Nine in place: leadership responsibility in place; Education and training are in place; Safety management personnel are in place; The implementation of laws and regulations is in place; Technical skills in place; Preventive measures have been put in place; Check the strength in place; Rectification and punishment in place; Full staff awareness is in place.

Ten unsafe psychological factors: fluky psychology; Laziness; Brave; Reckless; Anxiety; Irritability; Angry; Complacency; Curious.

Question 4: What should be paid attention to in the safety of workshop workers? 1, it is necessary to study safety technology and operating procedures hard to improve safety awareness and avoid accidents;

2. You need to wear safety protection articles;

3, need to be familiar with the unsafe factors in this workshop, will use the relevant safety equipment and facilities;

4, need to participate in production safety training, safety activities and sign a letter of responsibility for safety;

5. To patrol the production process and equipment, find potential safety hazards, and timely reflect and eliminate them;

6, need to abide by labor discipline, not allowed to take risks;

7. Must abide by the prohibition of the production workshop;

8, need to abide by the production workshop safety system;

9, need to fulfill their own safety responsibilities and obligations;

10, need to cooperate with leaders at all levels to complete various security tasks.

Question 5: What should be paid attention to in enterprise safety production inspection? (1) The guiding ideology and objectives of the activity. (2) the theme of the activity. Focusing on the theme of "managing hidden dangers, preventing accidents-building Olympic security together" and aiming at the problems existing in safety production, the theme of this enterprise can be added on the basis of the unified theme of the whole city. (3) the organization stage of the activity. Clarify the key stages of activity organization and the key work in each stage, and carry out safety production month activities in a planned and step-by-step manner. The organization of activities can generally be divided into publicity and mobilization stage, activity development stage and summary and commendation stage. (4) arrangement of key activities. Carefully design activities with demonstration, driving and radiation functions, and define the time, place, organizer and person in charge of the activities. (five) the specific requirements for the monthly activities of production safety of the enterprises under their jurisdiction. Mainly refers to the clear requirements for the monthly activities of safety production of wholly-owned or holding enterprises. (6) Requirements for monthly environmental layout of production safety. (seven) specific measures to ensure the implementation of the plan. (eight) the specific requirements for collecting and sorting out the activities of words, photos and audio-visual materials. Second, the basic requirements of the program preparation

Question 6: What are the main problems in workshop safety production? Netizen: Hello!

1, different industries, different factories and different workshops have different contents of safety production management!

2, production workshop general safety production system:

Workshop safety production responsibility system

Guarantee system of workshop safety production funds

Maintenance system of workshop safety production equipment

Distribution and use system of labor protection articles for safe production in workshop

Work injury insurance system for safe production.

Emergency plan for workplace safety accidents

Reward and punishment system for workplace safety production.

Production responsibility system of workshop safety team.

Workshop post safety responsibility system

Workshop fire safety system

Workshop safety operating system

Workshop safety power system

Workshop water safety system

Workshop safety training system

Occupational disease prevention and control system for workshop workers

Investigation system of hidden dangers in workshop safety production

I hope my reply is helpful to you!

Question 7: What should be paid attention to in safety production of electric welding workshop? Pay attention to the welding working environment, whether the welding equipment leaks electricity, whether the load is safe, whether flammable items are safely stacked and whether they are far away from the fire area.

Question 8: Students should pay attention to safety matters when visiting factories. 1. Visitors are invited to enter the factory in formal or business casual clothes. No sleeveless clothes, off-the-shoulder clothes, shorts, short skirts and sandals are allowed.

Please don't smoke indoors or in the factory.

3. There are many motor vehicles in the factory area. Please take sidewalks and crosswalks when crossing the road.

The glass of the hotel booth is smooth and fragile. Please don't step on and touch the exhibition car.

Please don't scribble on the exhibition car or the exhibition board.

6. Because spare parts logistics vehicles often pass through the workshop, after entering the workshop, guests should obey the instructions of the tour group staff and take the safe tour channel.

7. Visitors are not allowed to enter the green production operation area and talk with the on-site staff.

8. Don't touch the spare parts and equipment stored in the workshop.

9. It is forbidden to take photos and videos when entering the workshop.

Question 9: Matters needing attention in workshop production safety can be considered from the above aspects:

1, employee safety, mainly reflected in safe operation; 2, equipment safety, formulate safety operation procedures, post safety signs and equipment operation instructions, 3, fire prevention, hot work, etc. 4, inflammable and explosive articles, 5, workshop environment safety; Every aspect involves many problems, depending on the situation. If you want to be more detailed, I'm afraid it's more difficult.

Question 10: What security matters should enterprises pay attention to? Enterprises should do a good job in safety production management.

, we must do a good job in the following nine aspects.

1, implement the responsibility system for production safety, formulate the responsibility system for production safety according to the actual situation of the enterprise and different positions, and implement it in each position.

2, strengthen enterprise safety education, new workers into the factory must go through three levels of safety education, has been transferred to the post personnel must carry out safety education before taking up their posts.

3, strengthen the inspection of production safety, the responsible department must carry out regular or irregular inspection of production safety, workshop, team to conduct weekly inspection or daily inspection, operators must do a good job of equipment inspection before driving, to ensure that equipment and electrical appliances are in good condition before starting production. The hidden dangers of accidents found in the inspection must be rectified in time.

4. Strengthen the management of labor protection articles.

. The distribution of labor protection articles for different types of work should be different. Enterprises must distribute labor protection articles according to the distribution standards, and employees must wear labor protection articles when going to work.

5, special operations personnel must undergo professional training, and show certificates after passing the examination.

6, the management of foreign construction units, foreign construction units to undertake the construction project of this unit, the construction unit must complete three certificates (legal person, qualification, business license), and sign an agreement to clarify their respective responsibilities.

7. Traffic in the plant area must be marked with speed limit signs, and the key fire prevention areas should be clearly marked and managed by special personnel.

8, establish and improve the operating procedures of each position.

9, establish and improve the enterprise production safety management accounting, strengthen the basic management work.