Explanation of the overall effect of fire prevention?

1. Technical measures for fire safety protection.

1. Strictly control ignition sources. Try to use intrinsically safe electrical equipment (leakage tripping, overload and overcurrent protection, short-circuit instantaneous power-off device) to prevent short circuits and fires caused by heating and aging of electrical circuits. Strictly control any possible ignition sources.

2. Orderly control of combustibles. The number of flammable combustibles should not be large to avoid causing large-scale fires that are difficult to control; the locations of combustibles should be placed in an orderly manner to facilitate personnel control and escape; the spacing between combustibles should be scientific to prevent crossover and fire spread.

3. Reasonably control the safe distance between combustibles and ignition sources. The effective safety protection distance between combustibles and ignition sources is generally more than 5 meters. Because the workplace in the office is narrow, the minimum safe distance should be more than 1.5 meters.

4. Reasonably determine key fire prevention floor plans, implement fire protection equipment, and hang targeted fire prevention signs.

5. Keep fire escapes clear. Set up escape and rescue passages on high floors. Equipped with necessary number of escape ropes.

2. Fire safety protection management measures.

1. Implement a fire safety responsibility system.

Fire safety is everyone’s responsibility. All unit staff are obliged to do their own fire safety work. For your own working environment, first strengthen self-examination. The responsible entities and department heads of the unit should also conduct regular inspections. Strictly investigate fire hazards based on the above-mentioned fire safety technologies, and take timely measures to ensure safety through the "Five Certainties" and "Four Cleanups". At the same time, the unit safety committee organized personnel to conduct special inspections of key monitoring locations.

2. Old, outdated, high-power consumption, serious heating, and poor operating conditions electrical equipment should be promptly removed from the work site; and the use of high-power electrical appliances should be reduced as much as possible. Before use, carefully check whether the electrical circuits are knotted, damaged, exposed, or aged; someone should supervise the site when using it; make sure people leave, cut off the power, and turn off the lights when leaving; all electrical places should be equipped with a main switch that is easy to control. It is strictly prohibited to pull or connect electrical appliances indiscriminately.

3. Smoking is prohibited in places with a lot of combustible materials. It is prohibited to burn paper items without permission. Special areas implement the fire approval system.

4. Carry out fire safety education, publicize fire safety knowledge in the unit window bar, and conduct fire safety lectures for all employees to improve the fire safety awareness of the entire team.

5. Conduct regular fire inspections, promptly replace fire extinguisher agents and check the effectiveness of fire hydrants.

6. Establish a full-time and part-time fire protection organization to conduct fire simulation drills. Implement the fire protection duty system.

7. When necessary, all levels should sign a fire safety responsibility letter from top to bottom.

Fire safety precautions in KTV venues

1. Establish a strict fire and electricity system. Post slogans such as "No use of open flames" on the walls, and ensure that dedicated personnel are inspected to promptly eliminate hidden dangers such as cigarette butts and other fire hazards. The second is to strengthen electrical fire safety management, ensure that people and equipment are determined, no overloading of electricity is allowed, no temporary wires are connected without authorization, and safety operating procedures are strictly followed. Third, it is prohibited to bring in or set off flammable items such as fireworks and firecrackers in KTV venues.

2. Strictly check whether evacuation passages, safety exits are clear, and whether fire-fighting facilities are intact and effective.

3. Establish and improve a fire safety management system. KTV venues must formulate corresponding fire safety management systems and emergency evacuation plans based on actual conditions, establish unit fire prevention files, and urge employees to implement fire safety work in daily management services.