Safety production self-inspection and self-evaluation report

Model essay on safety production self-inspection and self-evaluation report

All walks of life should give priority to safety, safe production and safe work. According to your actual situation, we have compiled several samples of safety production self-inspection and self-evaluation reports for your reference. I hope everyone will ensure safety while completing the work.

Safety production self-inspection and self-evaluation report 1 In order to further strengthen and improve the safety work of the project department, respond to the call of the institute, effectively protect the life safety and property safety of the employees, and ensure the normal construction order of the project, combined with the actual situation of the project department, our department carefully inspected the safety work of the construction site and carried out the investigation and management activities of hidden dangers on the construction site. The self-inspection and rectification situation is summarized as follows:

I. Safety management

1, establishment and improvement of safety organization.

The project department has established a safety management network with the project manager as the first responsible person, as well as a safety production responsibility system and a safety management system. Equipped with full-time security officers, responsible for on-site safety patrol inspection and construction site safety inspection, forming a top-down safety assurance system.

2, the implementation of safety management system and responsibility system

(1) At present, the safety rules and regulations of the project department are complete and have strong operability. Continuously improve the execution of the safety and civilized construction system, strengthen the management of safety and civilized construction, and prevent accidents.

(2) In order to ensure the safety in production, the project department formulated the safety target indicators and decomposed them step by step according to the relevant requirements of the company, and defined the safety responsibilities of personnel and departments at all levels, which were put in place in the construction process.

The Project Department shall sign safety responsibility letters with the heads of various construction ZuoYeDui, and strictly implement the provisions on the responsibility system for production safety at all levels and the accountability for safety accidents. The Quality and Safety Department of the Project Department shall supervise, inspect and assess the implementation of the safety responsibility system, promptly remind and educate those who violate the responsibility system, and reward and punish them according to the assessment results.

3, safety inspection, hidden trouble investigation

In addition to the daily safety patrol inspection, the project department also prepares various safety warning signs and construction signs according to the site conditions, and places corresponding signs at the entrance, passage and near electrical equipment of the construction site.

Warning placard, to remind employees to pay attention to, do a good job of safety protection for themselves and others, and eliminate potential safety hazards.

4. Safety education and training

(1) The Project Department provides timely safety education and training to new managers and workers from time to time. The main contents of the training include: enterprise rules and regulations, basic safety knowledge, construction safety precautions, various related safety technical measures and operating procedures, and emergency rescue plan learning.

(2), according to the provisions, to participate in the electrician, welder, loader driver and other special operations personnel safety technical training and evidence collection.

(3) security team education activities carried out by various construction teams.

Second, the site construction safety situation

1, temporary facilities

(1) Temporary facilities are planned in a unified way in strict accordance with the requirements, and the layout is reasonable.

(2) Temporary facilities shall meet the technical requirements of fire prevention, rain protection and heat preservation. Living office area, construction area, warehouse, mechanical equipment parking area, etc. Patrol around the clock to ensure the safety of materials on site.

2. Use electricity safely

"One machine, one brake and one leakage" of electrical equipment on the construction site to ensure the safety of electricity use; Power supply equipment is equipped with warning signs. Lighting lamps and power supply lines shall be erected as required. The electrician on duty will often patrol to deal with hidden dangers in time to prevent accidents.

3. Special equipment

Daily operation, maintenance and handover records of major mechanical equipment shall be kept by special personnel. Check, repair and maintain the equipment and transport vehicles regularly during use, and fill in the equipment operation, repair and maintenance records. Immediately stop, rectify or repel the equipment with potential safety hazards. Scaffolding construction

4, fire management

The project department has formulated the fire management responsibility system and put it in place. Formulate and improve the fire emergency plan.

The project department will strengthen the inspection and monitoring of fire-prone places.

(1) There is no illegal use of open flame for heating in the construction area; Check the dormitory, found no illegal use of high-power electrical appliances and other phenomena, lighting power cord standard selfless connection.

(2) There is no violation in the work area or part where fireworks or smoking are prohibited.

5, safety protection facilities

During the construction period, safety management personnel can formally wear and use protective equipment such as safety helmet and safety belt; Protective facilities and obvious warning signs shall be set at the mouth of the cave and dangerous parts; Fire-fighting facilities are arranged near power-consuming parts and flammable materials.

Three. Problems existing in safety management

1, individual personnel have weak safety awareness, and there are still habitual violations on the construction site.

2. The layout of construction power lines is chaotic and needs to be further standardized.

3. Check the equipment regularly and improve various systems; However, the inspection data and records of the equipment itself are incomplete; Need to be further improved.

4. Individual safety protection facilities can't keep up with the construction progress, which leads to the lag of safety protection in the construction process.

IV. Corrective measures taken:

In order to ensure the safety of engineering construction and eliminate all kinds of potential safety hazards, aiming at the main problems existing in the process of self-inspection, the project department puts forward the following rectification measures:

1, the project department will strengthen supervision, carry out safety education in batches, and educate and publicize safety knowledge, laws and regulations for staff and cadres by means of daily inspections, inspections, meetings, safety education and training, billboards, newspapers, documents, etc., so as to improve staff's safety awareness and responsibility awareness and prevent safety accidents.

2. Continue to pay attention to the problem of electricity consumption in construction, strictly investigate the phenomenon of illegal electricity consumption in workers' dormitories, and make a unified and standardized layout of on-site lines.

3, increase the supervision of habitual violations. To strengthen safety education, management supervision and punishment, we must improve employees' safety awareness ideologically.

4, improve and perfect the system, promote the comprehensive safety management work rules-based, put in place. Implement the responsibilities of all levels and departments in strict accordance with the safety responsibility system.

5, in a timely manner in accordance with the provisions of the project department, regularly carry out safety inspection and hidden trouble investigation and management, do a good job in the construction site safety hidden trouble search and rectification.

In a word, through this inspection, we found some shortcomings and omissions in the safety work of the project department. The project department carried out rectification in time, which was effectively controlled, but the safety work is a long-term work. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve employees' safety awareness, better implement various tasks and requirements of safety management, further enhance employees' safety responsibility awareness, clarify their respective responsibilities, and provide safety guarantee for the smooth progress of project construction.

2 municipal government target management office safety inspection report:

Under the leadership and support of the Municipal Party Committee and the Municipal Government, our bureau further clarified the concept that safety work is a "life project", took "safety, standardization and development" as the goal and "unity, integrity, professionalism and efficiency" as the principle, and made unremitting efforts to ensure the stability of the city's safety production situation.

I. Completion of accident indicators

There were * * * accidents in the city 1453, a decrease of 45% compared with last year; 266 people died, down from last year13.64%; The death toll was lower than the provincial control target of 45 people, accounting for 85.5% of the provincial control target, putting an end to a serious accident with more than one death 10. Among them, there were road traffic accidents 1047, with 248 deaths; Coal mine accident 1, 3 people died; There were 389 fire accidents and 2 deaths; Accidents occurred in ground enterprises 16, with 6 deaths; Other accidents 1, 7 people died. The control indicators issued by the provincial government to our city are: the total number of deaths in accidents is 3 1 1, the death rate per 10,000 people is 0.63, the death rate per 100 million yuan of output value is 0.59, and the death rate per million tons of coal mines is 1. The completion of our city is: the total number of deaths in accidents is 266, the death rate per 10,000 people is 0.54, the death rate per 100 million yuan of output value is 0.47, and the death rate per million tons of coal mines is 0.26. The death rate per 10,000 people is lower than the provincial target of 0.09, the death rate per 100 million yuan of output value is lower than the provincial target of 0. 12, and the death rate per million tons of coal mines is lower than the provincial target of 0.74.

Two, strengthen the supervision and supervision of production safety, all kinds of accidents have been effectively rectified.

Last year, our bureau organized 1 "100-day safety" activities; In the form of enterprise self-inspection, industry mutual inspection, departmental spot check and government supervision, five major safety inspection activities of "Double Festival", spring, summer, autumn and winter were organized. During the "Golden Week" on May 1 and May 1 1, two special inspections and rechecks on tourism safety were carried out. According to the national and provincial arrangements, in August, our city began to integrate resources and "strike hard" and "shut down" coal mines. Finally, 32 illegal mines were closed, 405 unqualified wellheads were closed, and 84 mines were rectified. Since 5438+0 1 at the beginning of June, under the unified deployment of the Safety Committee, our bureau has taken effective measures in conjunction with the Municipal Transportation Bureau, the Fire Brigade, the Public Utilities Bureau and other departments to intensify the work to ensure the stable situation of production safety during the "Double Festival" period. Combined with the characteristics of the industry, special safety rectification has been carried out in eight key areas, including coal mines, non-coal mines, dangerous chemicals, public gathering places, road traffic, water traffic, gas pipelines, civil explosive equipment, fireworks and firecrackers, and all the rectification has achieved phased results by the end of the year. According to statistics, * * * inspected the production and business units for more than 5,600 times throughout the year, and found out various hidden dangers 12 1000, and rectified 1060 on site, and rectified 1000 within a time limit, with a rectification rate of 96%. Effectively monitor the hidden dangers of accidents that have not been rectified.

Third, the accident was closed.

1 The coal mine accident was investigated and handled by Henan Branch of Henan Coal Mine Safety Supervision Bureau. Our bureau participated in the investigation and handling of 6 accidents of ground enterprises and 1 civil explosives, and all cases have been closed.

Four, the "three simultaneous" work has been effectively strengthened.

In strict accordance with the requirements of "three simultaneities" of construction projects, our bureau has reviewed and accepted the reconstruction and expansion projects of some enterprises. In conjunction with relevant departments, timely grasp the new construction, renovation and expansion projects in the city, intervene in advance, and always supervise and inspect during the design and construction process, so that enterprises can guarantee the capital investment necessary for safe production according to law and eliminate backward production technologies and machinery and equipment. Where the safety investment is insufficient, the process equipment is aging, and the safety production is endangered, it is necessary to rectify within a time limit, and those who delay rectification or refuse to rectify shall be investigated and punished according to law. By carrying out the "three simultaneities" work, the basic level of enterprise safety production has been comprehensively improved, and the purpose of eliminating hidden dangers of accidents from the source has been achieved.

Verb (abbreviation of verb) Training of safety production management personnel

This year, in addition to the daily publicity and education on work safety, our city organized three large-scale publicity activities, namely "March 26th Safety Day", "Work Safety Month" and "Regulations on Work Safety in Henan Province", and conducted three large-scale centralized publicity activities on March 26th, June 13 and August 1 day respectively, educating more than 500,000 workers. In terms of safety production training, while urging enterprises to carry out pre-job training and all-staff training, relying on the three-level training base, the city held many training courses, vigorously carried out training for special operations and enterprise safety management cadres, and * * * trained more than 4 150 special operations personnel and 780 safety management cadres, effectively improving the operational skills of special operations personnel and the management level of safety management cadres.

Six, strengthen industry construction, establish and improve the safety management system, and strive to achieve institutionalized work and scientific management.

To this end, last year, while doing a good job in business, our bureau paid close attention to the following two tasks: First, we made, improved and implemented the following 16 systems: the responsibility system for party style and clean government, the assessment system for political and legal business study, the democratic life meeting system, the system of work cooperation and division of responsibilities, the city-wide safety inspection system, the attendance assessment system for public servants, the quantitative system for safety inspection and punishment, the vehicle management system and the financial management system; Second, strengthen law enforcement, adjust and enrich eight inspection brigades and administrative law enforcement brigades, continue to carry out in-depth activities of "rectifying team style and paying close attention to work implementation", and conduct monthly assessments, rewards and punishments. Introduce the responsibility system of internal law enforcement division of labor and cooperation, implement the system of separation of evidence collection, punishment decision and execution, and standardize law enforcement behavior.

Seven, do a good job in building a clean government within the party, promote security with sincerity, and protect security with sincerity.

Our bureau has mainly carried out the following work to strengthen the construction of party style and clean government: first, it has carried out special clean-up on the implementation of the relevant provisions of honesty, self-discipline and financial system; Second, conscientiously implement the provisions of "two lines of revenue and expenditure" and strengthen the "management" of extra-budgetary funds and bills; Third, strictly implement the responsibility system for building a clean and honest government, and strive to implement the responsibility system for building a clean and honest government to everyone and every job; Fourth, carry out in-depth educational activities to maintain the advanced nature of Communist party member. Through the educational activities of maintaining the advanced nature of Communist party member, the thoughts of party member cadres have been purified, everyone's consciousness has been improved, and the consciousness of being in power for the people, being honest and self-disciplined has been enhanced.

Eight, improve the legal institutions, the implementation of standardized management.

First, establish various law enforcement responsibility systems, strictly enforce law enforcement procedures, and administer according to law. Up to now, all law enforcement officers are certified, and the certification rate has reached 100%. At the end of last year 10, all the staff of our bureau participated in the city's administrative law enforcement training activities, and all of them passed the examination, and new law enforcement certificates are being processed. The second is to strengthen the training and study of laws and regulations. In the second half of last year, after the promulgation of the State Council's Special Provisions on Preventing Safety Accidents in Coal Mine Production (Order No.446 of the State Council) and the Emergency Notice of General Office of the State Council on Resolutely Rectifying and Closing Illegal Coal Mines without Safe Production Conditions (State-run Invented Electricity [] No.21), our bureau organized many study and training activities in combination with the Regulations on Safe Production in Henan Province, which strengthened the law enforcement awareness of law enforcement personnel and standardized the law enforcement behavior.

Nine, do a good job in government affairs.

I set up a safety supervision and approval window in the administrative examination and approval center of the municipal government, and all administrative examination and approval items are included in the examination and approval center. Through the assessment, comrades with strong professional ability and strong sense of responsibility were selected to work at the window, and the responsibilities of the chief representative were also clarified, and efforts were made to provide high-quality and efficient services for enterprises and institutions. At the same time, an open column on government affairs will be set up in the most eye-catching position at the entrance of the office building to publicize the division of leadership, departmental responsibilities, service matters, service commitments and other contents on the wall, so that the broad masses can understand the work process.

Ten, strengthen the safety information work, to provide a reliable basis for government decision-making.

The information dispatching center of our bureau implements a 24-hour dispatching duty system, timely uploads and issues instructions from superiors and related spirits, timely grasps the city's safety work and safety production trends, and analyzes and studies the city's safety production situation. And issue a safety briefing once a month to provide a reliable basis for government decision-making.

Safety production self-inspection and self-evaluation report 3 I. Development of self-evaluation:

In order to comprehensively improve the level of safety production in enterprises, strengthen the supervision and management of safety production in enterprises, effectively promote the overall work at the grass-roots level, promote self-discipline and establish a long-term mechanism for continuous improvement of safety production, a safety production Committee headed by the general manager of the company was specially established to be responsible for the implementation, supervision and assessment of standardization, and to promote the standardization of safety production as the focus of safety work. According to the standards, the company has made a comprehensive and detailed self-assessment on the basic management of production safety, the safety status of equipment and facilities, the working environment and occupational health, and now the self-assessment is reported as follows:

Second, the main contents of self-assessment:

1, safety objectives and indicators:

According to the requirements of the company's annual safety production target, the annual safety work target was formulated at the beginning of the year, and detailed to all departments and teams, and the inspection and assessment were carried out in strict accordance with relevant systems and regulations during implementation.

The overall safety management system of the company runs smoothly and effectively, and keeps a good safety production record. Up to now, all safety indicators have been completed well in 20xx. Personnel without post contraindications; Safe operation of special equipment100%; There are no serious nonconformities in occupational health and safety management.

2, safety leadership, staffing and safety management responsibilities:

The company has established a perfect safety management network, and the general manager is the first person responsible for the company's safety production, and is fully responsible for the safety production work. The manager of the production department assists the general manager in leading the company's safety production work and directly leads the development of safety work. The specific department in charge of the company is the Safety Production Committee, with 2 part-time safety officers.

According to the company's requirements, combined with the company's reality, 43 detailed safety special management documents were formulated, and the safety production standardization system documents were established, which stipulated the safety production responsibilities of all employees, and defined and implemented the safety management responsibilities of managers at all levels and the safety responsibilities of post personnel. At the same time, the management system further standardized the behavior of safety management activities, safety inspection, hidden dangers rectification content and so on. The safety work has entered a "normalization and standardization" mechanism.

3. Safety investment:

In order to implement safety improvement centered on safety essence, various measures are actively implemented in safety investment, and potential safety hazards on site are eliminated through maintenance, improvement and technical transformation. The company also gives priority to safety investment every year, and gives full guarantee from the aspects of fund preparation and project implementation. Formulated the Safety Management System for Safety Input, and the safety input system

There are clear and detailed regulations on the investment and use of all funds. In order to implement this system more effectively and ensure the use of safety investment, the company made an annual plan for safety production investment at the beginning of the year, which effectively ensured the use of safety production.

In the 20xx annual plan, the safety investment budget is100,000 yuan, and nearly 50,000 yuan has been put into use by the end of the project, such as 30,000 yuan for safety standardization system consulting service and100,000 yuan for safety production standardization reevaluation; Occupational hazard detection is more than 3,000 yuan; Buy 30 sets of fire fighting equipment and related accessories and 90 volumes of warning tapes; A security identification block 340; The cost of two inspections of safety valves and pressure gauges is more than 4,000 yuan, and there are also expenses for heatstroke prevention and cooling, purchase of labor insurance supplies, education and training.

4, laws and regulations and safety management system:

The company has established a system for identifying and obtaining applicable safety production laws, regulations and standards, defined the competent departments, and determined the access channels and methods, so as to identify and obtain applicable safety production laws, regulations and standards in time. Various functional departments also timely identify and obtain applicable laws, regulations, standards and norms on production safety according to the actual situation of their own departments. According to the relevant laws and regulations, a list of laws applicable to this enterprise was formulated and approved by the safety management personnel. The company will provide applicable laws and regulations to all departments and employees in a timely manner.

In the implementation of the company's system, according to the company's characteristics, 25 safety professional management documents, 17 safety technical operation procedures and 4 emergency plans were formulated. In the safety education of employees, the newly issued management system is interpreted, organized and implemented through different forms such as class meeting special study and daily work implementation. At the same time, pay attention to safety education for new employees. New employees must participate in three-level safety education, and they can only take up their posts after passing the examination, so as to continuously improve their safety awareness and the implementation of standardized operations.

The company organizes employees to conduct safety training and departmental safety inspection from time to time, and timely evaluates and corrects problems in daily and special inspections according to relevant management systems to ensure correct safety orientation. All safety activities have complete safety records, and the effective management of safety records has been strengthened.

5, production safety education and training:

According to the relevant management requirements of the state and the company, carry out safety production education and training in strict accordance with the system. It mainly includes safety regulations, management system and three-level safety education for new employees (job transfer). , and compare and discuss the accidents in the same industry, draw inferences from others and put them on record.

The general manager of the company and the general manager of production participated in the safety production training organized by Shunyi District in time, and passed the examination, having the knowledge and management ability of safety production suitable for production and business activities. All on-the-job personnel have participated in the safety education and production skills training organized by the company, are familiar with the company's safety production rules and regulations and safety operation procedures, and their personal abilities have met the post requirements. Employees who fail to pass the training are not allowed to take up their posts. Operators who change their posts or return to work after leaving their posts for one year must participate in training and safety education, and only after passing the examination can they take up their posts. Special operations personnel regularly participate in the training and study organized by the government and units, and ensure that 100% is certified.

6, equipment and facilities management:

Our company mainly produces lathes, milling machines, grinders, automatic butt welding machines, automatic cutting machines and other corresponding auxiliary equipment. There are two equipment operation areas (saw blade production area and machining operation area). There is a special person responsible for the operation, maintenance and management of equipment in the corresponding area. The company strictly controls the hidden dangers of equipment and facilities, analyzes and handles them in time, prevents and handles safety work from the source, and sets up obvious safety warning signs in corresponding places. Relevant responsible persons in all regions should arrange maintenance plans reasonably, and carry out maintenance and repair of equipment and facilities according to the safety management system of equipment and facilities and the safety management system of equipment and facilities maintenance and repair, so as to eliminate hidden dangers in time and ensure the closed-loop management and safe and stable operation of equipment.

7, post operation safety management:

Every post has perfect job specifications. According to the actual situation of the post, the operation steps, technical requirements, equipment management requirements and safety and environmental protection requirements are specified for each operation, and the management documents and post regulations are revised and reviewed irregularly every year according to the management requirements.

In the field of safety management, accident case study, inference investigation, hanging safety warning signs and operation reminders are carried out, and the awareness of standardized operation is continuously strengthened in various ways to promote standardized operation and improve operation safety. Actively cooperate with and participate in the safety inspection and occupational health inspection organized by the company in accordance with the requirements of relevant national laws, regulations and systems, and publish the inspection and inspection results in time.

The company clearly requires all operators to wear labor protection articles correctly, operate in strict accordance with the safety operation rules, and perform the duties of safety production, and shall not immediately rectify violations or nonconformities to ensure safe work.

8, hidden trouble investigation, rectification:

In order to check hidden dangers in time and ensure safe production, a safety inspection system is formulated according to the needs and characteristics of the company's safe production, and the hidden dangers of the company's production activities, equipment and facilities are checked by means of comprehensive inspection, seasonal inspection, holiday inspection and daily inspection.

Summarize and track the hidden dangers every month in time, ask the responsible person to rectify the hidden dangers found within a time limit, and verify the feedback from the inspectors on-site rectification to realize the closed loop of safety management. At the same time, according to the change of specific time and season, mobilize all staff to carry out safety management and special safety hazard investigation, summarize the investigation of employees and formulate special rectification plans. At present, the overall state is relatively stable.

9. Hazard control:

In accordance with the provisions of the Company's Hazard Identification Management System, comprehensively improve the hazard identification, evaluation and control measures, and timely revise, supplement and update relevant contents according to the changes of site conditions and hidden dangers found in safety inspection, and implement dynamic management. The company focused on the modification and improvement of control measures, and * * * identified 10 hazard sources, and each hazard source had timely and powerful control measures, and organized employees to learn and master them in time.

10, Occupational Health Management:

According to the requirements of the company's occupational disease prevention and control management system and occupational safety and health file management system, our company was tested for occupational disease hazards (noise and dust), and the test results were all qualified. The company seriously carries out the identification, monitoring and evaluation of occupational hazard factors in posts, and manages occupational health records of post employees involved in occupational hazard factors to ensure that there are no occupational contraindications.

The main tasks of occupational health management are: 1) to carry out job hazard identification activities once a year, comprehensively sort out and identify occupational health hazard factors existing in jobs, and formulate control measures; 2) Organize the annual physical examination of noise and dust posts. 3) According to the occupational health hazards existing in the site, hang signs and warning signs in different areas. 4) Set up a bulletin board in the area of occupational hazard factors, and timely publish the latest detection results of occupational hazard factors and the company's rules and regulations on occupational health, so as to let employees know the relevant situation.

1 1, emergency rescue:

In terms of emergency rescue management, the company has established an emergency contact management system and implemented dynamic management. If there is any personnel change or contact information change, it will be updated in time. Organize all staff to learn and be familiar with the management system.

In the preparation of the plan, in order to ensure the safety of employees and production equipment, reduce all kinds of risks, minimize the loss and social impact caused by emergencies or emergencies, ensure that relevant disposal plans can be started in time in an emergency, and prevent the accident from expanding. The emergency plan managed by the company mainly involves flood accidents, mechanical injury accidents, electrical equipment leakage and electric shock accidents.

In order to make emergency rescue management effective, the company dynamically sorts out and supplements emergency equipment and reserves emergency materials, so that the on-site configuration can meet the requirements of "making good use of police force and effectively responding to emergencies". Organize employees to carry out special safety training, drills and evaluation activities according to the plan, so as to prevent people from being injured and losing the purpose and effect of making the plan if relevant accidents are not rescued in time.

12, accident management:

According to the company's casualty accident management system, strengthen accident management, conduct accident introspection on the illegal behaviors investigated and dealt with on the spot in the way of accident analysis meeting, draw lessons from violations, put an end to repeated violations, and conscientiously implement the principle of "four don't let go".

According to the company's regulations, after an accident, an accident investigation team must be set up to clarify the responsibilities and authorities of relevant personnel for accident investigation or cooperation investigation. In the accident investigation, it is necessary to find out the time, process, causes, casualties and direct economic losses of the accident, put forward rectification measures and treatment suggestions, and prepare an accident investigation report. After the accident treatment, a special meeting must be held to do a good job in personnel safety education, implement rectification measures, and strengthen safety education and safety inspection measures in the later work to prevent accidents.

13, performance evaluation and continuous improvement:

Based on the principle of "implementing responsibilities, strengthening management, promoting cooperation and continuous improvement", the company organizes safety standardization and implementation evaluation at least once a year according to the reward and punishment system for safety production, so as to verify the suitability and effectiveness of various system measures, check the completion of work objectives and evaluate the safety performance of the two major operation areas. Safety performance evaluation mainly comes from inadequate management of work area, unsafe behaviors of workers, failure to effectively manage and rectify unsafe environment, and investigation by higher authorities found in daily management on site. At the same time, it encourages original and effective good working methods and measures in daily safety management.