Work slogan 8 words

◆ Production site publicity slogan (Class K): K0 1 Think carefully and operate strictly; Strict inspection and careful verification.

K02 Everyone has the ability to improve, and everything has room for improvement.

K03 always pursues efficiency improvement, and pays attention to methods and skills in everything.

K04 Communicate from top to bottom to know people by * *, and coordinate left and right to make progress.

K05 A careless person is very busy, and everyone is very careful and goes smoothly.

K06 preventive maintenance can be completed on time, and smooth production will not go wrong.

K07 instruments and equipment are frequently maintained, and the production is naturally smoother.

K08 eyes, hands and heart, bad nature can't run away.

K09 frontline workers, please note that quality and efficiency depend on you.

K 10 Pay more attention and ask less questions.

The products produced by K 1 1 have no quality, which is equivalent to making useless garbage.

K 12 Do a good job in product packaging to ensure the final quality of products.

K 13 Strengthen team building and improve work efficiency.

K 14 Everyone proposes innovation, and the cost is naturally reduced.

K 15 would rather check beforehand than rework afterwards.

K 16 old problem, to be cured; Pay attention to small problems.

K 17 Strive to do it well at one time and maximize the benefits.

K 18 is an expert who can't make mistakes and moves towards zero defects.

K 19 If you don't work hard today, try to find a job tomorrow.

K20 Use electricity safely and save water; Fire fighting facilities, regular maintenance.

FIFO is the basis for observing the storage principle of K2 1.

K22 chemicals are dangerous, so be careful when storing and using them.

K23 Remember clearly the feeding and discharging, and manage several accounts more clearly.

K24 cherishes materials and attaches importance to quality; Reasonable planning and clear identification.

◆ Slogan of production process control (Class P): P0 1 Control every working procedure and complete every product.

P02 Strengthen on-site process management and strictly control process factors.

P03 The first article inspection is not sloppy, and the process is stable and error-free.

P04 Report the problem immediately and handle it in time.

P05 Think about improvement measures and make unremitting efforts.

P06 Zero defect production process, 100% quality products.

P07 More investment, better methods and naturally higher performance.

P08 Keep the operating standards in mind, and you will be comfortable.

P09 It's no trouble to borrow your brain, and it's easy to exert yourself.

P 10 you see, it is difficult for me to increase production with my brain.

P 1 1 insist on education and training, and online operation can't be wrong.

P 12 It is better to act at once than to say a hundred empty words.

P 13 analyze the causes carefully and solve the problem thoroughly.

P 14 old problems and small places are often fatal to varieties.

P 15 Everyone checks the quality of work, and the quality of products is also checked at different levels.

Work hard to achieve QCC, and the work will not be bitter.

P 17 process quality control point, product quality lifeline.

The next process is our customers.

Company slogan:

No.: TL0 1 The first lesson of management is to manage yourself first.

No: TL02 Management is action, and management is setting an example.

No.: TL03 manager in advance and style manager.

No: TL04 adheres to first-class management, produces first-class products and provides first-class services.

No.: TL05 Correct Guidance+Execution = Management

No.: TL06 What cannot be implemented+People who cannot be implemented are investigated = implemented.

No.: TL07 Good leader: guidance before work, supervision during work and counseling after work.

No.: TL08 Good employee: Think about business, do practical things, and nothing will happen.

No.: TL09 People who can't do small things can never do big things.

No.: TL 10 Only by doing things with your heart can you achieve great things.

No.: TL 1 1 Ideas determine ideas, and ideas determine the way out.

No.: TL 12 Find a solution to the problem, not an excuse to avoid it.

No.: TL 13 Work should be simplified, not simplified.

No.: TL 14 Three elements of work: responsible person, time limit and result.

No.: TL 15. I don't see this problem as the biggest one.

No.: TL 16 If there are no problems, progress will stop and retrogression will begin.

No.: TL 17 The purpose of the meeting is to solve problems, not to repeat them.

No.: TL 18: If a meeting is held, it must be discussed; If we discuss it, we must decide; If you decide, you will do it; If it is done, it will be fruitful.

No.: TL 19 Strengthen communication and promote support and cooperation.

No.: TL20 Success and failure coexist, and competition and transcendence coexist.

No.: TL2 1 success = efforts+correct methods+less empty talk.

No: TL22 Zero inventory, zero waste, zero defect, zero failure.

No.: TL23 smashing the rice bowl of an enterprise is smashing the rice bowl.

Number: TL24 How much water a barrel can hold is determined by the shortest wooden board.

No.: TL25 Only unexpected things, nothing impossible.

No.: TL26 Do it right the first time, and do it right the first time.

No.: TL27 Thinking+Completion+Completion = 100.

Production slogan:

No.: TG0 1 Old problems, small places, often fatal quality injuries.

No.: TG02 Carefully analyze the causes and thoroughly solve the problems.

No.: TG03 You see, I use my brain, and it is difficult to increase production.

No.: TG04 No worries when you use your head, no pains when you use your strength.

No: TG05: More investment, better methods and higher performance.

No: TG06 controls every working procedure and completes every product.

No: TG07 strictly controls the production process to ensure that all products are qualified.

No: TG08 zero defect production process, 100% quality products.

No.: TG09 process quality control point, product quality lifeline

No.: TG 10 The quality of work is guaranteed for everyone, and the quality of products is guaranteed at all levels.

No.: TG 1 1 Pursuing Excellence and enjoying perfect results.

No: TG 12 pursues the ultimate goal of seven zeros endlessly.

No.: TG 13 Eliminate all waste, pursue excellence and continuous improvement.

No.: TT0 1 Eliminate unnecessary actions, with the shortest action distance.

No.: TT02: Benefit from action analysis and make the best allocation of limited resources.

Code: TT03 IE's three principles: simplicity, specialization and standardization.

No.: TT04 Optimize the production process to maximize efficiency and benefit.

No.: TT05 Improve management with engineering methods and plan projects with management concepts.

No.: TT06 is based on technology and cooperates with scientific management to find, solve and prevent problems.

No: TT07 IE is a scientific method to improve efficiency, cost and quality.

No: TT08 reduces costs and improves production quality and efficiency.

No.: TT09 Minimize the resources occupied by enterprise production.

No.: TT 10 Minimize the management and operation costs of enterprises.