Where is the installation location of the toilet water heater?

If the water heater and the shower area are in the same area, the water heater should be installed at a certain distance from the shower area. If there is dry-wet separation in the bathroom, the water heater can be installed above the toilet. If the bathroom has a ceiling, you can install the water heater above the ceiling, which can save the space of the bathroom.

How to install a water heater

1, the first thing we need to do is to prepare the necessary tools for installation. Generally speaking, what we need to prepare are electric drills, pens, electrical tapes, rulers, awls, pliers and wrenches. These are all necessary tools, so be prepared before installation.

2. Ampere of ammeter and main switch is our second step. We need to check whether the air switch of the water heater matches the water heater and whether the wire diameter of the water heater matches the water heater. After checking these, you can start installing the water inlet switch. Check the water pipes before installation to see if they are in good condition. If it is damaged, replace the water pipe.

Then what we have to do is unpack the water heater and check whether the water heater and accessories are in good condition. The next step is to position the wall with a pencil. The specific positioning method is based on the size of the screw hole and the lifting rod of the hanging plate. When locating screw holes, we should pay special attention to avoid circuits and waterways in the wall.

After planning, you can drill holes in the wall. After drilling, the expansion plug can be installed. The next step is to install the hanging plate of the water heater.

5. Install the water heater on the hanging plate, and then install the lifting bracket of the shower head. When installing, we need to connect the power cord between the water pipes. This is also an important step.

Through the above steps, even if the water heater is installed, we can check whether it can run normally after the installation is completed.

7. In the installation process, it is necessary to consider whether the pipeline of the water heater leaks. If it is leaking, it should be replaced, which is also for your own safety.

8. When installing the water heater, there should be an independent socket and reliable grounding. Otherwise, the water heater cannot be installed.