Safety and civility signs at bridge construction sites?

The following is the relevant content about safety and civility signs at bridge construction sites brought to you by Zhongda Consulting for your reference.

The mixing station

The concrete (mortar) mix ratio, operator job responsibilities, and post safety operating procedures signs are hung, and the "Pay attention to safety" warning sign is hung in a conspicuous position.

Storage area

Sand and gravel materials are stored according to regulations and have material area signs, and sand and gravel materials are equipped with material identification signs.

Vehicle Parking

Concrete transport vehicles, concrete pump trucks, truck cranes, dump trucks and other transportation vehicles at the construction site should be parked in the cleaning area after completing operations (times) every day. In the parking area.

Beam making yard (prefabricated yard)

The beam making yard should install partition signs to indicate "beam making area", "beam storage area", etc.; the tensioning area should be clearly marked with "tensioning area" Pull the "Danger, Keep Out" sign.

Sedimentation tank - safety protection and warning

The sedimentation tank of the mixing station is equipped with a double-bar steel pipe guardrail. The railing posts are driven into the ground to a depth of not less than 500mm. The guardrail is buried at a distance of 500mm from the sedimentation tank. The edge of the pool should not be less than 500mm, the distance between the columns should not be greater than 3000mm, and safety warning signs should be hung on the guardrails.

Water operations - safety protection and warnings

Protective railings and dense-mesh safety nets should be installed on the construction platform of water operations and on the edge and water of the ship. Sufficient safety nets should be hung for night operations. Illuminate and equip with obvious warning signs to prevent ship collisions; set up hazard warning signs for the day at the high entrance to the site.

Steel bar processing plant - safety protection and warning

Set regional signs in eye-catching locations in the material storage area, processing area, and finished product area of ??the site, and all types of steel, finished products, and semi-finished products are neatly classified and stacked , meet the rainproof and moisture-proof requirements, and set up signage. "Safe operating procedures signs" are hung on various processing equipment, and "safe operation, be careful of electric shock" warning signs are hung on electrical equipment; prohibition signs "No entry for idlers in heavy construction areas" are hung at the entrance; and are placed at locations with fire sources. Fire-fighting equipment and safety warning signs are hung.

Mud pool - safety protection and warning

The mud pool is equipped with a double-bar steel pipe guardrail. The railing posts are driven into the ground to a depth of not less than 500mm, and the guardrail is buried away from the edge of the mud pool. It cannot be less than 500mm, and the distance between columns should not be greater than 3000mm; the guardrail should be equipped with a dense safety net and safety warning signs should be hung.

Operating platform - safety protection and warning

The operating platform is made of φ48~51mm×3.5mm steel pipes connected with fasteners, or made of solid materials such as angle steel and channel steel. The table top The wooden boards should be fully paved with a thickness of not less than 40mm and tied firmly; a solid safety guardrail should be installed on the operating platform, and a foot guard with a height of not less than 180mm should be installed at the root; the ladder should be inclined.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd