How to paint is better, and what are the steps of painting?

Black+blue+red

First, adjust the required color depth to the appropriate depth of black, and then add the other two colors.

Black is dominant.

Method 2:

Cooked brown and ochre tones are the most reliable and easy to peel off. Use as few colors as possible. In particular, dark color is not sensitive enough for human eyes and it is difficult to adjust, but because it is dark, it does not need to be adjusted accurately.

Method 3:

Use the three primary colors of pigment (red, yellow and blue) to mix black with three colors, and then add a lot of yellow and a little red. How much to add, according to your own needs.

PS modulation method r: 96 g: R:96 G:56 B: 17.

C: 59 male: 76 female: 100 male: 39

How to adjust the brown color of paint?

Red 12%+ yellow 8%+ black 3%+ white 77%.

You can increase or decrease the required depth on white. ..

This is how the brown color of the paint is adjusted. Pay attention to the proportion: red 12%+ yellow 8%+ black 3%+ white 77%, so that the color of brown can be adjusted. If you still need to control the depth of the brown color, this is very simple. If you want a darker color, reduce the proportion of white, and if the color is lighter, increase the proportion of white.

Matters needing attention in paint color matching are as follows:

1: paint color matching should be careful. Generally, try the sample first, get the amount of tinting paint first, and then prepare the sample according to the results of the sample. First, adjust the secondary color and secondary color in a small container.

2. First add the main color (the color with large dosage and low coloring power), then slowly add the dark color (or color matching) with strong dyeing ability, keep stirring, and observe the color change at any time.

3. "From shallow to deep", especially adding pigments with strong coloring power to avoid excessive.

4. In terms of color matching, there will be a slight difference in color between paint and dry film. After all kinds of paints are dried, their colors will deepen.

5. We should know in advance the floating degree of primary colors and the changes of coating materials in colorful coatings, especially amino coatings and perchloroethylene coatings, which need more attention.

Above, Bian Xiao introduced how to adjust brown and three methods to adjust brown. In fact, these three methods are all similar. Although they are all brown, the colors adjusted by different methods will still have a certain difference of 1. Bian Xiao also introduced how to adjust the brown color of paint. The modulation of paint brown has a certain proportion, and some of them are matters needing attention when modulation. I hope Bian Xiao's introduction can help you.