Civilized construction measures on site of building electromechanical installation project?

site civilized construction and environmental protection are comprehensive reflections of various management work, representing our image and mental outlook. Its purpose is to create a good working and living environment, and a good environment is the basic guarantee for improving project quality, speeding up project progress and carrying out safe construction, and also the basic requirement for maintaining the city appearance and maintaining the normal order of the city.

during the construction of this project, we will strictly implement the provisions on civilized construction in the National Standard for Safety Inspection of Building Construction, the Standard for Civilized Construction of Construction Projects in Nanjing (Trial) and the relevant provisions of China Construction Corporation on civilized construction and CI strategy implementation, so as to ensure the establishment of a civilized construction model site of Nanjing construction projects and a demonstration project of CI reaching the standard and achieving excellence in China Construction Corporation, and strive for a civilized construction site in XX Province.

1. Establish a civilized construction and environmental protection system

1. Establish a system

Our company is the first batch of national construction enterprises to pass the ISO14 environmental system certification. For this project, we will establish and improve a civilized construction environmental protection organization system, and operate in strict accordance with the system in the construction process. The system diagram is as follows:

2. Responsibilities of major departments in the system

2.1 Responsibilities of project manager

2.1.1 Conscientiously implement the guidelines, policies, laws, regulations and various rules and regulations of civilized construction, and be responsible for civilized construction and environmental protection of this project. Organize to formulate the methods and requirements for civilized construction and environmental protection of this project.

2.1.2 organize the deputy project manager, the quality and safety department and the office to formulate the civilized construction and environmental protection management system of this project.

2.1.3 lead and organize civilized construction and environmental protection inspection on the construction site on a regular basis every month, and issue rectification instructions if nonconforming factors are found. Organize the formulation of rectification measures, and be responsible for their implementation, and solve the problems in civilized construction and environmental protection management put forward at all levels at regular intervals, with specific personnel and measures.

2.1.4 organize all departments of the project department to meet the external inspection of civilized construction and environmental protection of the project.

2.2 Responsibilities of the Deputy Project Manager

2.2.1 Organize and study the standards and regulations related to civilized construction and environmental protection.

2.2.2 organize the implementation of various measures for civilized construction and environmental protection formulated by this project.

2.2.3 divide the objectives and scope of civilized construction and environmental protection work together with the office and quality and safety department.

2.2.4 organize the inspection of civilized construction and environmental protection work in this area every half month, and urge professional and technical personnel to be responsible for rectification of the nonconforming factors detected.

2.3 Office Responsibilities

2.3.1 Seriously study the relevant regulations on civilized construction and environmental protection, and forward them to all departments of the project department.

2.3.2 plan CI layout management, make and install CI faCIlities in the whole construction, office and living area, and do a good job in ci facilities management. if damaged or lost facilities are found, they should be repaired or re-made, purchased and installed in place.

2.3.3 strengthen the management of logistics life, so that the management and construction personnel of the project department have a good place to rest and ensure the smooth progress of the project construction.

2.4 Responsibility of Quality and Safety Department

2.4.1 Conscientiously implement relevant regulations on civilized construction and environmental protection management, guide the construction team (team) to do a good job in civilized construction and environmental protection, and urge employees entering the construction site to abide by various rules and regulations to ensure the implementation of civilized construction and environmental protection.

2.4.2 on-site inspection of the implementation of civilized construction and environmental protection measures, timely correction of nonconforming factors found, and the right to take decisive measures when violations occur, and the construction teams (teams and groups) and individuals who violate the regulations on civilized construction and environmental protection management will be punished in accordance with relevant regulations.

2.4.3 under the leadership of the deputy project manager, organize civilized construction and environmental protection inspection on a regular basis, make inspection records, issue problem rectification sheets for the problems found out, and personally supervise the rectification.

2.4.4 responsible for collecting and sorting out the management data of civilized construction and environmental protection, and reporting the civilized construction and environmental protection status of this project department to the superior competent department in time.

2.5 responsibilities of the engineering department

2.5.1 responsible for the preparation of technical measures for civilized construction and environmental protection of this project.

2.5.2 participate in civilized construction and environmental protection inspection organized by the project department, and prepare corresponding rectification measures for the problems found.

2.5.3 be responsible for implementing the civilized construction and environmental protection measures prepared by the superior and those specified in the construction organization design and scheme, and carry out technical disclosure of civilized construction and environmental protection according to the characteristics of this project, and explain the matters needing attention to the construction personnel in detail and perform the signing formalities. Regularly check the implementation of operating procedures, technical measures, civilized construction and environmental protection technical disclosure, correct violations at any time, and take direct responsibility for what happens because of no disclosure or unclear disclosure.

2.6 Responsibilities of Mechanical Power Department

2.6.1 Responsible for civilized construction and operation of environmental protection facilities on the construction site, and supervise and guide the normal maintenance of equipment.

2.6.2 according to the unified deployment of the project department, all kinds of large-scale construction equipment are parked regularly.

2.7 Responsibility of Material Supply Department

2.7.1 Responsible for purchasing civilized construction and environmental protection articles of this project, and ensuring that such articles meet the national standards and relevant regulations of local governments. It is forbidden to distribute and use articles that do not meet the standards.

2.7.2 according to the requirements of civilized construction and environmental protection, materials should be stacked and goods stored, and the management of goods transportation should be strengthened to ensure the implementation of civilized construction and environmental protection.

2.8 Responsibilities of professional and technical personnel

2.8.1 Seriously implement various technical measures for civilized construction and environmental protection of this project, and make technical disclosure to the team.

2.8.2 check the implementation of civilized construction and environmental protection rules and regulations of the project by the construction team every day, and correct the problems in time when found.

2.9 Responsibilities of construction personnel

2.9.1 Seriously study the operating rules of civilized construction and environmental protection, abide by the regulations of civilized construction and environmental protection management of this project department, and construct in strict accordance with the operating rules.

2.9.2 listen carefully to the disclosure of civilized construction and environmental protection, take an active part in various civilized construction and environmental protection activities, and have the right to refuse illegal orders, and have the responsibility to put forward improvement suggestions for practices that do not conform to civilized construction and environmental protection.

2.9.3 take good care of civilized construction and environmental protection facilities and signs, and report the damage to relevant personnel immediately.

II. Unified management of production and living garbage

1 Set up several movable garbage bins in temporary, living and office areas, and assign special personnel to manage and clean them. The garbage in the living quarters shall be treated in a centralized and unified way, and it is forbidden to burn the residual waste at the construction site.

2 Establish a health contract area, set up a temporary garbage dump, and clean up the garbage and leftover materials in time.

3 pay attention to the daily maintenance and management of temporary facilities, dismantle them in time after completion, and restore the flat state.

4 when cooperating with the construction on the civil wall, special cutting equipment shall be adopted to make the slotting and opening standardized, and the positioning shall be accurate, and the construction shall never be indiscriminate. At the same time, the generated civil engineering garbage will be cleaned up immediately.

5 littering and residues are not allowed in the construction site, and temporary stacking points should be set up in appropriate places, managed by special personnel, so that the daily collection will be clear, centralized stacking will be carried out and shipped out regularly. Removal of muck, garbage and fluid articles shall be covered and leakproof, and shall not be scattered during transportation.

6 in order to prevent the construction dust pollution, the ground of temporary roads shall be sprinkled with water to prevent dust in summer.

7 There is a lot of materials, garbage, people and vehicles at the site. Materials should be unloaded in time, and neatly stacked according to regulations. If there is any scattering during the transportation of construction vehicles, assign personnel to clean them. For materials transported at night, measures shall be taken to prevent disturbing people when unloading, and noise pollution shall be controlled.

III. Unified management of material stacking and machine parking

1 All kinds of materials are stacked in different categories, neatly stacked, clearly marked, and the prefabricated site is neat inside and outside, clean and safe. Construction waste shall be recovered in time and disposed of properly. When the workers finish the day's work, they should clean up the construction site in time, so as to finish the work.

2 it is forbidden to occupy the roads around the site at will, which will hinder the traffic. if it is necessary to occupy them temporarily, the permission of the municipal and transportation departments should be obtained first. Construction equipment shall be maintained regularly, and the site shall be arranged neatly and beautifully, and the machines and equipment shall be placed neatly.

3 consider the transportation and hoisting channels of large-scale equipment and accessories, and organize the installation in place in time to protect the products of other majors or subcontractors.

4 machinery and equipment used on site should be stored at fixed points on the plane, abide by mechanical safety regulations, and always keep the surrounding environment such as the fuselage clean. The marks and numbers of machinery are obvious, and the safety device is reliable.

iv. reasonably discharge sewage and waste water

1. keep roads clear between the construction site and the temporary area, and set up open drains for rainwater drainage, so as to ensure on-site drainage.

2 facilities such as men's and women's toilets and canteens are set up in the site, and several drinking water points are set up in the office area, temporary area and construction site to ensure the cleanliness and hygiene of drinking water for employees.

3 It is forbidden for workers to urinate on the spot. Once they are found, they will be fined and removed immediately.

4 establish saving measures to eliminate running water and ever-burning lamps.

5 sewage, washing water and other construction water in life and construction should be discharged into the temporary sedimentation tank for sedimentation, and then discharged reasonably.

6 The inside and outside of the dormitory should be dry, the room should be kept clean, and disinfectant should be sprayed to kill mosquitoes and flies.

7 The sewage discharged by cleaning machinery should be discharged, and it is not allowed to flow anywhere.

v. Effective control of noise pollution

1 Night construction must be approved by the owner or the site supervision unit, and noise generation shall be strictly limited to minimize noise and environmental pollution.

2 in order to reduce construction noise and prevent construction noise pollution, the pneumatic transfer machine should be equipped with a muffler, the compressor should have good performance and run as low as possible, and it should be installed as far away from the adjacent houses as possible, and the operation time should be arranged reasonably to reduce night construction and noise pollution.

3 to reduce the influence of construction noise and dust on the nearby people, simple noise prevention measures should be taken for large machinery. Motor vehicles drive at a speed limit on the construction site. Avoid dust, and often sprinkle water to reduce dust pollution. The storage and transportation of dust-prone fine materials at the site should be covered.

4 choose construction machinery with low noise or equipped with noise elimination and noise reduction equipment. The machinery with strong noise in the construction site (such as planer, grinder, etc.) shall be provided with a closed mechanical shed to reduce the spread of strong noise.

5 The processing and production of finished products and semi-finished products that generate strong noise shall be completed in a closed workshop to reduce the noise caused by processing and production on the construction site.

VI. Vigorously promote the implementation of CI in the construction site

On-site CI planning is divided into three parts: planning stage, implementation stage and inspection and acceptance stage.

1 On-site CI planning stage: around the overall goal of civilized construction, combined with the actual situation and environment on site, an on-site CI working group and an on-site implementation team are set up within the project team to determine the on-site CI objectives and implementation plan. Carefully compile Detailed Rules for the Design and Implementation of On-site CI, Specific Implementation Plan for Visual Image of On-site CI, and Management System for On-site CI Work to ensure that the CI work is fully controlled from planning and design to implementation.

2 site CI implementation stage: the site CI work is implemented by the CI executive team according to the overall requirements of site CI planning, and the work mainly includes: overall planning of construction plane CI, employee code of conduct, office and dress requirements, visual planning of site appearance, overall planning of the main project CI, design of "seven cards and one map" of the project, engineering publicity card, guide card design, identification of construction machinery and tools, and material stacking requirements. Combine CI implementation with construction quality, safety, civilization and hygiene, and pay attention to changing the publicity form with the construction progress.

3 On-site CI inspection and acceptance stage: CI work inspection is divided into local and overall effects for inspection and acceptance, so as to improve internal quality, ensure external effects and promote the realization of civilized construction objectives.

4 implement the CI strategy, strengthen the presentation of the engineering enterprise image to the enterprise strength and enterprise level, and implement the eight aspects of site appearance, site office and conference reception room, gatehouse, site map, life overlay, construction equipment, floor image and personnel image according to the CI standards of China Construction Site, so as to establish a good social image.

5 CI design scheme: implemented according to the CI design manual of China construction corporation.

for more information about the engineering/service/procurement bidding, and to improve the winning rate, you can click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd